Partios Wholesale catalogue

S-TR Distributor | Parts

Cutter and elements (315) · Center link (301) · Tie rod end (248) · Leaf spring shackle (236) · Engine mount (204) · Bolts, nuts and pins (168) · Leaf spring silent block (123) · Stabilizer bar bushing (119) · 203 further part types (2,968)

5,005 current catalogue lines

About the S-TR range

S-TR is a multi-system brand rather than a single-product one: the range Partios carries runs to 5,005 lines across 211 distinct part types. The largest groups are cutter and elements (315), center link (301), tie rod end (248), leaf spring shackle (236) and engine mount (204). They account for only 31% of the range, though. The other 3,210 lines sit across 205 further part types, which is what makes this a range to search rather than browse. That tail includes leaf spring silent block, stabilizer bar bushing and stabilizer link. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 5,005 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

S-TR Coupling elements 522.KOR.RF50

Towing hitch locking pin (new type)

View part

S-TR Tow bar element 522.KOR.TD.010400

Towing eye bush (x57,5)

View part

S-TR Socket wrenches 53K.0284

Wrench socket Hexagonal 90mm) fits: SCANIA

View part

S-TR Socket wrenches 58K.0297

Wrench socket, pipe fits: MAN MERCEDES

View part

S-TR Leaf spring silent block 592

Silentblock/spring bush front L/R (20x57x80mm) fits: IVECO

View part

S-TR Socket wrenches 59K.0298

Wrench socket, pipe, with a cut-out, round fits: MAN MERCEDES

View part

S-TR Torsion bar 60170737Z

Torsion bar fits: IVECO S2000 65C11-15

View part

S-TR Wheel hub cover 602.005

Wheel hub cover fits: SCHMITZ

View part

S-TR Fifth wheel coupling elements 651

Fifth wheel coupling elements (lower pedestal rubber small) fits: JSK 37 C

View part

S-TR Fifth wheel coupling elements 652

Fifth wheel coupling elements (large pedestal rubber upper) fits: JSK 37 C

View part

S-TR Fifth wheel coupling repair kit 653

Fifth wheel repair kit (bolts pads washers) fits: JSK 37C fits: JOST

View part

S-TR Rear wishbone silent block 669

Rear track control arm silent block

View part

S-TR Socket wrenches 69K.0310

Wrench socket 12-angle 72mm) fits: IVECO MAN

View part

S-TR Straw shredder and elements 7.001

A chopping knife (turning), price per: 25pcs 173x50x3mm, hole diameter: 18mm fits: CLAAS NEW HOLLAND

View part

S-TR Straw shredder and elements 7.002

A chopping knife (turning), price per: 25pcs 173x50x4mm, hole diameter: 18mm fits: CLAAS NEW HOLLAND

View part

S-TR Straw shredder and elements 7.003

A chopping knife (turning), price per: 25pcs 173x50x4mm, hole diameter: 18mm fits: CLAAS NEW HOLLAND

View part

S-TR Straw shredder and elements 7.004

A chopping knife (Fixed), price per: 25pcs 195x50x3mm, hole diameter: 12mm fits: CLAAS

View part

S-TR Straw shredder and elements 7.005

A chopping knife (Fixed), price per: 25pcs 195x50x3mm, hole diameter: 12mm fits: CLAAS

View part

S-TR Straw shredder and elements 7.006

A chopping knife (turning), price per: 25pcs 173x50x3mm, hole diameter: 18mm fits: CLAAS

View part

S-TR Straw shredder and elements 7.007

A chopping knife (Fixed), price per: 25pcs 175x40x3mm, hole diameter: 10mm fits: CASE NEW HOLLAND

View part

S-TR Straw shredder and elements 7.008

A chopping knife (turning), price per: 25pcs 166x50x3,5mm, hole diameter: 20mm fits: MASSEY FERGUSON

View part

S-TR Straw shredder and elements 7.009

A chopping knife (turning), price per: 25pcs 173x50x4mm, hole diameter: 20mm fits: CLAAS

View part

S-TR Straw shredder and elements 7.010

A chopping knife (turning), price per: 25pcs 175x50x4mm, hole diameter: 20mm fits: CLAAS

View part

S-TR Straw shredder and elements 7.011

A chopping knife (turning), price per: 25pcs 175x50x4mm, hole diameter: 20mm fits: CLAAS

View part

S-TR Straw shredder and elements 7.012

A chopping knife (turning), price per: 25pcs 173x50x5mm, hole diameter: 18mm fits: NEW HOLLAND

View part

S-TR Straw shredder and elements 7.013

A chopping knife (turning), price per: 25pcs 173x50x5mm, hole diameter: 20mm fits: NEW HOLLAND

View part

S-TR Straw shredder and elements 7.014

A chopping knife (turning), price per: 25pcs 200x50x2,5mm, hole diameter: 20mm

View part

S-TR Straw shredder and elements 7.015

A chopping knife (turning), price per: 25pcs 175x50x4,5mm, hole diameter: 20mm

View part

S-TR Straw shredder and elements 7.016

A chopping knife (Fixed), price per: 25pcs 198x50x3mm, hole diameter: 6,5mm fits: JOHN DEERE

View part

S-TR Straw shredder and elements 7.017

A chopping knife (Fixed), price per: 25pcs 198x50x3mm, hole diameter: 6,5mm fits: JOHN DEERE

View part

S-TR Straw shredder and elements 7.018

A chopping knife (turning), price per: 25pcs 175x50x4mm, hole diameter: 20mm fits: BIZON

View part

S-TR Straw shredder and elements 7.019

A chopping knife (Fixed), price per: 25pcs 175x40x3mm, hole diameter: 10mm fits: BIZON

View part

S-TR Straw shredder and elements 7.020

A chopping knife (turning), price per: 25pcs 173x50x4,5mm, hole diameter: 18mm fits: NEW HOLLAND

View part

S-TR Straw shredder and elements 7.021

A chopping knife (turning), price per: 25pcs 173x50x4,5mm, hole diameter: 18mm fits: NEW HOLLAND

View part

S-TR Straw shredder and elements 7.022

A chopping knife (Fixed), price per: 25pcs 140x50x3mm, hole diameter: 12mm fits: NEW HOLLAND

View part

S-TR Straw shredder and elements 7.023

A chopping knife (turning), price per: 25pcs 90x50x4mm, hole diameter: 11mm fits: CLAAS

View part

S-TR Straw shredder and elements 7.024

A chopping knife (turning), price per: 25pcs 175x50x4,5mm, hole diameter: 20mm fits: BIZON

View part

S-TR Straw shredder and elements 7.025

A chopping knife (turning), price per: 25pcs 175x50x4,5mm, hole diameter: 20mm fits: BIZON

View part

S-TR Straw shredder and elements 7.026

A chopping knife (turning), price per: 25pcs 173x50x5mm, hole diameter: 18mm fits: JOHN DEERE

View part

S-TR Straw shredder and elements 7.027

A chopping knife (Fixed), price per: 25pcs 198x50x3mm, hole diameter: 12,9mm fits: NEW HOLLAND

View part

S-TR Straw shredder and elements 7.028

A chopping knife (Fixed), price per: 25pcs 180x46x3mm, hole diameter: 12mm fits: CLAAS

View part

S-TR Straw shredder and elements 7.029

A chopping knife (Fixed), price per: 25pcs 160x50x3mm, hole diameter: 12mm fits: NEW HOLLAND

View part

S-TR Straw shredder and elements 7.030

A chopping knife (turning), price per: 25pcs 175x50x3,5mm, hole diameter: 20mm fits: NEW HOLLAND

View part

S-TR Straw shredder and elements 7.030.2

A chopping knife (turning), price per: 25pcs 155x50x5mm, hole diameter: 25mm fits: BIZON

View part

S-TR Straw shredder and elements 7.031

A chopping knife (turning), price per: 25pcs 173x50x4mm, hole diameter: 18mm fits: NEW HOLLAND

View part

S-TR Straw shredder and elements 7.032

A chopping knife (turning), price per: 25pcs 173x50x4mm, hole diameter: 20mm fits: CLAAS

View part

S-TR Straw shredder and elements 7.032.1

A chopping knife (turning), price per: 25pcs 175x50x4mm, hole diameter: 20mm fits: CLAAS

View part

S-TR Straw shredder and elements 7.033

A chopping knife (Fixed), price per: 25pcs 140x50x3mm, hole diameter: 12mm fits: NEW HOLLAND

View part

Buying with Partios

Buying S-TR parts through Partios

Are these genuine S-TR parts?

Yes. Every S-TR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source S-TR parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for S-TR lines that aren't currently available.

Do you supply S-TR parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on S-TR parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a S-TR order?

It depends on the line. Stocked S-TR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for S-TR parts?

No. There's no minimum order value or quantity on a Partios trade account. Some S-TR lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account