Partios Wholesale catalogue
S-TR Distributor | Parts
Cutter and elements (315) · Center link (301) · Tie rod end (248) · Leaf spring shackle (236) · Engine mount (204) · Bolts, nuts and pins (168) · Leaf spring silent block (123) · Stabilizer bar bushing (119) · 203 further part types (2,968)
5,005 current catalogue lines
About the S-TR range
S-TR is a multi-system brand rather than a single-product one: the range Partios carries runs to 5,005 lines across 211 distinct part types. The largest groups are cutter and elements (315), center link (301), tie rod end (248), leaf spring shackle (236) and engine mount (204). They account for only 31% of the range, though. The other 3,210 lines sit across 205 further part types, which is what makes this a range to search rather than browse. That tail includes leaf spring silent block, stabilizer bar bushing and stabilizer link. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 5,005 lines the range covers most common applications in this area.
Catalogue products
Vehicle references are indicative — confirm against the article number.
S-TR Straw shredder and elements 7.034
A chopping knife (turning), price per: 15pcs 177x60x5,5mm, hole diameter: 30mm fits: FELLA
View partS-TR Straw shredder and elements 7.035
A chopping knife (Fixed), price per: 25pcs 190x50x3mm, hole diameter: 12mm fits: JOHN DEERE
View partS-TR Straw shredder and elements 7.036
A chopping knife (turning), price per: 25pcs 173x50x4mm, hole diameter: 20mm fits: CLAAS
View partS-TR Straw shredder and elements 7.037
A chopping knife (turning), price per: 25pcs 175x50x4,5mm, hole diameter: 20mm fits: NEW HOLLAND
View partS-TR Straw shredder and elements 7.040
A chopping knife (turning), price per: 25pcs 175x50x4mm, hole diameter: 20mm fits: CLAAS
View partS-TR Straw shredder and elements 7.041
A chopping knife (turning), price per: 25pcs 173x60x8mm, hole diameter: 20mm fits: KRONE
View partS-TR Straw shredder and elements 7.042
A chopping knife (turning), price per: 25pcs 165x50x5mm, hole diameter: 25mm fits: NEW HOLLAND
View partS-TR Straw shredder and elements 7.043
A chopping knife (turning), price per: 25pcs 165x50x5mm, hole diameter: 25mm fits: NEW HOLLAND
View partS-TR Straw shredder and elements 7.044
A chopping knife (turning), price per: 25pcs 173x50x4mm, hole diameter: 18mm
View partS-TR Straw shredder and elements 7.045
A chopping knife (turning), price per: 25pcs 173x50x4mm, hole diameter: 18mm fits: JOHN DEERE NEW HOLLAND
View partS-TR Straw shredder and elements 7.046
A chopping knife (turning), price per: 25pcs 175x50x4,5mm, hole diameter: 20mm fits: JOHN DEERE
View partS-TR Straw shredder and elements 7.047
A chopping knife (turning), price per: 25pcs 175x50x4,5mm, hole diameter: 20mm fits: JOHN DEERE
View partS-TR Straw shredder and elements 7.048
A chopping knife (Fixed), price per: 25pcs 115x50x3mm, hole diameter: 10,5mm fits: JOHN DEERE
View partS-TR Straw shredder and elements 7.049
A chopping knife (turning), price per: 25pcs 175x50x4,5mm, hole diameter: 20mm fits: LAVERDA
View partS-TR Straw shredder and elements 7.050
A chopping knife (turning), price per: 25pcs 175x50x3,5mm, hole diameter: 27mm
View partS-TR Straw shredder and elements 7.051
A chopping knife (turning), price per: 25pcs 173x50x5mm, hole diameter: 20mm fits: JOHN DEERE NEW HOLLAND
View partS-TR Straw shredder and elements 7.052
A chopping knife (turning), price per: 12pcs 187x50x5mm, hole diameter: 19,3mm fits: JOHN DEERE
View partS-TR Straw shredder and elements 7.053
A chopping knife (turning), price per: 12pcs 187x50x5mm, hole diameter: 19,3mm fits: JOHN DEERE
View partS-TR Straw shredder and elements 7.054
A chopping knife (turning), price per: 10pcs 173x58x8mm, hole diameter: 20mm
View partS-TR Straw shredder and elements 7.055
A chopping knife , price per: 10pcs 125x93x4mm fits: NEW HOLLAND
View partS-TR Straw shredder and elements 7.056
A chopping knife , price per: 10pcs 148x133x5mm, hole diameter: 17mm fits: NEW HOLLAND
View partS-TR Straw shredder and elements 7.057
A chopping knife , price per: 10pcs 135x64x4,5mm fits: CASE
View partS-TR Straw shredder and elements 7.201
A chopping knife (turning), price per: 25pcs 163x50x3mm, hole diameter: 22mm
View partS-TR Straw shredder and elements 7.202
A chopping knife (Fixed), price per: 25pcs 185x40x3mm, hole diameter: 9mm
View partS-TR Fifth wheel coupling elements 70.01.17
Fifth wheel coupling elements (M14x22) fits: JSK 37 C JSK 37 E / EW JSK 37 EA / EAW JSK 37 ME 140
View partS-TR Fifth wheel coupling elements 70.01.71
Fifth wheel coupling elements (M10x20x1,5) fits: JSK 37 CW JSK 37 E / EW
View partS-TR Axle suspension nut 70-3003032
Axle brackets nut M18x1,5 (crown)
View partS-TR Socket wrenches 71K.0312
Wrench socket 12-angle 60mm) fits: MAN
View partS-TR Engine mount 7340
View partS-TR Socket wrenches 73K.0314
Wrench socket Hexagonal 38mm)
View partS-TR Exhaust system bumping block 7514
Buffer of the exhaust system (śr.50x45mm M10x1,5mm)
View partS-TR Stabilizer silent block 7546
Stabilizer silentblock (inner diameter: 18mm, outer diameter: 55mm, length: 55mm) fits: MAN
View partS-TR Exhaust system bumping block 7548
Buffer of the exhaust system
View partS-TR Torque arm repair kit 7598
Torque arm repair kit rear L/R (sleeve, M24x2, 95x72mm) fits: EVOBUS KÄSSBOHRER SETRA
View partS-TR Socket wrenches 75K.0524
Wrench socket Hexagonal 60mm) fits: BPW
View partS-TR Leaf spring pad 7717
Suspension spring elements fits: VW LT 28-35 II, LT 28-46 II 05.96-07.06
View partS-TR Cab suspension silent block 7737
Cabin suspension silentblock front (16/60x64/80mm) fits: MAN TGA, TGS I, TGX I 06.99-
View partS-TR Engine mount 7886
Poduszka silnika MERCEDES
View partS-TR Oil filter / oil plug wrench 78K.0363
, socket, metric size: 107 mm, VOLVO
View partS-TR Torque arm silent block 7949
Lateral control rod silentblock (bushing, 19/75x115mm, hole diameter 19mm) fits: BOVA MAN MERCEDES SCANIA
View partS-TR Driver’s cab suspension rubber sleeve 7967
Cab suspension rubber bushing (9/55/62x11mm) fits: MERCEDES
View partS-TR Cutter and elements 8.001
Knife holder price per: 25pcs 204x90x3mm, hole diameter: 19mm
View partS-TR Cutter and elements 8.002
Knife holder price per: 1pcs 204x90x3mm, hole diameter: 12mm
View partS-TR Cutter and elements 8.003
Knife holder price per: 1pcs 225x82x3mm, hole diameter: 10mm
View partS-TR Cutter and elements 8.004
Knife holder price per: 1pcs 159x96x3mm, hole diameter: 19mm fits: CLAAS
View partS-TR Cutter and elements 8.005
Knife holder price per: 1pcs 187x130x3mm, hole diameter: 12mm fits: SAMASZ
View partS-TR Cutter and elements 8.006
Knife holder price per: 1pcs 273x125x4mm, hole diameter: 18mm fits: ZTR
View partS-TR Cutter and elements 8.007
Knife holder price per: 1pcs 245x136x4mm, hole diameter: 10mm fits: SAMASZ
View partBuying with Partios
Buying S-TR parts through Partios
Are these genuine S-TR parts?
- Yes. Every S-TR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source S-TR parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for S-TR lines that aren't currently available.
Do you supply S-TR parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on S-TR parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a S-TR order?
- It depends on the line. Stocked S-TR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for S-TR parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some S-TR lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account