Partios Wholesale catalogue
Mpbs Distributor | Suspension & Steering
Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)
2,629 current catalogue lines
About the MPBS range
Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MPBS Polyurethane suspension sleeve 66020144-00/CS
Rear swingarm bushing (rear), hardness: 75 Sha, outer diameter: 35,8mm, length 36mm, quantity per set: 1pcs fits: VOLVO 960 II, S90 I, S90 II, V90 I, V90 II 07.94-12.21
View partMPBS Polyurethane suspension sleeve 6602031-00/80SHA
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 44mm, quantity per set: 1pcs fits: VOLVO 940 II, 960 08.90-10.98
View partMPBS Polyurethane suspension sleeve 6602031-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6602032-00/80SHA
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 34,5mm, quantity per set: 1pcs fits: VOLVO 940 II, 960 08.90-10.98
View partMPBS Polyurethane suspension sleeve 6602032-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6602034-00/80SHA
Polyurethane shock absorber bushing, hardness: 80 Sha, outer diameter: 58mm, quantity per set: 1pcs fits: VOLVO 960, 960 II, S90 I 08.90-05.98
View partMPBS Polyurethane suspension sleeve 6602034-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6602048-00/80SHA
Front lower Swingarm bushing, hardness: 80 Sha, outer diameter: 40mm, length 65mm, quantity per set: 1pcs fits: VOLVO 960, 960 II, S90 I, S90 II, V90 I, V90 II 08.90-12.21
View partMPBS Polyurethane suspension sleeve 6602048-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6602048-00/CS
Front lower Swingarm bushing, hardness: 75 Sha, outer diameter: 40mm, length 65mm, quantity per set: 1pcs fits: VOLVO 960, 960 II, S90 I, S90 II, V90 I, V90 II 08.90-12.21
View partMPBS Polyurethane suspension sleeve 6602049-00/80SHA
Front lower Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 70mm, length 50mm, quantity per set: 1pcs fits: VOLVO 960, 960 II, S90 II, V90 I, V90 II 08.90-12.21
View partMPBS Polyurethane suspension sleeve 6602049-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6602053-1-00/80SHA
Rear trolley bushing (rear), hardness: 80 Sha, outer diameter: 62,5mm, quantity per set: 1pcs fits: VOLVO 960 II 07.94-12.96
View partMPBS Polyurethane suspension sleeve 6602053-1-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6602053-1-00/CS
Rear trolley bushing, hardness: 75 Sha fits: VOLVO 960 II, S90 I, V90 I 07.94-12.98
View partMPBS Polyurethane suspension sleeve 6602053-2-00/80SHA
Polyurethane bushing fits: VOLVO 960 II 07.94-12.96
View partMPBS Polyurethane suspension sleeve 6602053-2-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6602079-00/80SHA
Rear differential gear bushing, hardness: 80 Sha, outer diameter: 72mm, quantity per set: 1pcs fits: VOLVO 960 II, S90 II, V90 II 07.94-12.21
View partMPBS Polyurethane suspension sleeve 6602079-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6602079-00/CS
Rear differential gear bushing, hardness: 70 Sha/75 Sha, outer diameter: 72mm, quantity per set: 1pcs fits: VOLVO 960 II, S90 II, V90 II 07.94-12.21
View partMPBS Polyurethane suspension sleeve 66021175-00/80SHA
Polyurethane bushing, 1pcs, reaction bar, L/R, rear axle, hardness: 80 Sha, seargent
View partMPBS Polyurethane suspension sleeve 66021175-00/90SHA
Polyurethane bushing, 1pcs, reaction bar, L/R, rear axle, hardness: 90 Sha, seargent
View partMPBS Polyurethane suspension sleeve 68001121-00/80SHA
Polyurethane bushing, hardness: 80 Sha, quantity per set: 1pcs fits: SCANIA P I, R I, T 03.04-05.19
View partMPBS Polyurethane suspension sleeve 68001121-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6800129-00/80SHA
Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: SCANIA 3, 3 BUS, 4, G I, P I, R I, T 01.88-
View partMPBS Polyurethane suspension sleeve 6800129-00/90SHA
Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 1pcs fits: SCANIA 3, 3 BUS, 4, G I, P I, R I, T 01.88-
View partMPBS Polyurethane suspension sleeve 6800129B-00/80SHA
Polyurethane stabilizer bushing, 2pcs, front stabilizer, fits: SCANIA 3, 4, G I, P I, R I, T 10.6D-9.3D 05.87-09.22
View partMPBS Polyurethane suspension sleeve 6800129B-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6800129C-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6800129C-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6800130-00/80SHA/80
Polyurethane bushing, hardness: 80 Sha, outer diameter: 120mm, length 92mm, quantity per set: 1pcs fits: SCANIA G I, P I, T 03.04-05.19
View partMPBS Polyurethane suspension sleeve 6800130-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6800131-00/80SHA
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 41mm, quantity per set: 1pcs fits: SCANIA 3, 3 BUS, 4, S 01.88-
View partMPBS Polyurethane suspension sleeve 6800131-00/90SHA
Polyurethane stabilizer bushing, hardness: 90 Sha, outer diameter: 41mm, quantity per set: 1pcs fits: SCANIA 3, 3 BUS, 4, S 01.88-
View partMPBS Polyurethane suspension sleeve 6800131B-00/80SHA
Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: SCANIA 4, 4 BUS, F, G I, K I, N BUS, P I, R I, T 05.95-
View partMPBS Polyurethane suspension sleeve 6800131B-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6800197-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6800197-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6800197/80SHA
Polyurethane bushing, hardness: 80 Sha, quantity per set: 2pcs fits: SCANIA 4, G I, P I, R I, T 05.95-05.19
View partMPBS Polyurethane suspension sleeve 6800197/90SHA
Polyurethane bushing, hardness: 90 Sha, quantity per set: 2pcs fits: SCANIA 4, G I, P I, R I, T 05.95-05.19
View partMPBS Polyurethane suspension sleeve 6800197/CS
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 6800231-00/80SHA
Polyurethane bushing fits: SCANIA L, P II, R II 09.16-
View partMPBS Polyurethane suspension sleeve 6800231-00/90SHA
Polyurethane bushing,
View partMPBS Driver’s cab suspension rubber sleeve 6800397ZP/65SHA
Driver’s cab suspension polyurethane sleeve (14/43x42mm) fits: SCANIA G II, L, P II, R II, S 09.16-
View partMPBS Front track control arm silent block 7700104-00/80SHA
Front track control arm silent block front L/R (16x49x51 mm) fits: IVECO DAILY III, DAILY IV, DAILY V 2.3D-Electric 05.99-02.14
View partMPBS Polyurethane suspension sleeve 7700104-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 7700104/K/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 7700104/K/90SHA
Polyurethane bushing,
View partBuying with Partios
Buying MPBS parts through Partios
Are these genuine MPBS parts?
- Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MPBS parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.
Do you supply MPBS parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MPBS parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MPBS order?
- It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MPBS parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account