Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 77001148-00/80SHA

Front Swingarm bushing (front) 38mm, hardness: 80 Sha, outer diameter: 75mm, quantity per set: 1pcs fits: IVECO DAILY III, DAILY IV, DAILY V 05.99-02.14

View part

MPBS Polyurethane suspension sleeve 77001148-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 77001148-57-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 57mm, length 44mm, quantity per set: 1pcs fits: IVECO DAILY I, DAILY II, DAILY III, DAILY IV, DAILY V 01.78-02.14

View part

MPBS Polyurethane suspension sleeve 77001148-57-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 57mm, quantity per set: 1pcs fits: IVECO DAILY I, DAILY II, DAILY III 01.78-07.07

View part

MPBS Polyurethane suspension sleeve 77001149-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 77001149-00/80SHA/29

Front upper/ lower Swingarm bushing (rear) 29mm, hardness: 80 Sha, outer diameter: 52mm, length 44mm, quantity per set: 1pcs fits: IVECO DAILY III, DAILY IV, DAILY V 05.99-02.14

View part

MPBS Polyurethane suspension sleeve 77001149-00/80SHA/32

Front upper/ lower Swingarm bushing (rear) 32mm, hardness: 80 Sha, outer diameter: 62mm, quantity per set: 1pcs fits: IVECO DAILY III, DAILY IV, DAILY V 05.99-02.14

View part

MPBS Polyurethane suspension sleeve 77001149-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 7700129-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 7700129-00/80SHA/20

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: IVECO DAILY I, DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI MERCEDES E (W210), S (W140) 01.78-

View part

MPBS Polyurethane suspension sleeve 7700129-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 7700129-00/90SHA/20

Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 1pcs fits: IVECO DAILY I, DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI MERCEDES E (W210), S (W140) 01.78-

View part

MPBS Polyurethane suspension sleeve 7700130-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 7700130-00/80SHA/28

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: IVECO DAILY I, DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI MERCEDES E (W210), S (W140) 01.78-

View part

MPBS Polyurethane suspension sleeve 7700130-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 7700130-00/90SHA/28

Polyurethane stabilizer bushing, hardness: 80 Sha/90 Sha, quantity per set: 1pcs fits: IVECO DAILY I, DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI MERCEDES E (W210), S (W140) 01.78-

View part

MPBS Polyurethane suspension sleeve 7700134-00/80SHA

Polyurethane shock absorber bushing, hardness: 80 Sha, outer diameter: 34,7mm, quantity per set: 1pcs fits: IVECO DAILY III, DAILY IV, DAILY V FIAT DUCATO 05.99-12.18

View part

MPBS Polyurethane suspension sleeve 7700134-00/90SHA

Polyurethane shock absorber bushing, hardness: 90 Sha, outer diameter: 34,7mm, quantity per set: 1pcs fits: IVECO DAILY III, DAILY IV, DAILY V FIAT DUCATO 05.99-12.18

View part

MPBS Polyurethane suspension sleeve 7800112-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 47mm, length 64mm fits: TESLA MODEL S, MODEL X 09.12-04.26

View part

MPBS Polyurethane suspension sleeve 7800112-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 7800113-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, quantity per set: 1pcs fits: TESLA MODEL X 09.15-04.26

View part

MPBS Polyurethane suspension sleeve 7800113-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, quantity per set: 1pcs fits: TESLA MODEL X 09.15-04.26

View part

MPBS Polyurethane suspension sleeve 78001178-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 44mm, length 38mm fits: TESLA MODEL S, MODEL X 09.12-04.26

View part

MPBS Polyurethane suspension sleeve 78001178-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 44mm, length 38mm fits: TESLA MODEL S, MODEL X 09.12-04.26

View part

MPBS Polyurethane suspension sleeve 7800180-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 62mm, length 78mm fits: TESLA MODEL S, MODEL X 09.12-04.26

View part

MPBS Polyurethane suspension sleeve 7800180-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 7800204-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 80mm, length 80mm, quantity per set: 1pcs fits: TESLA MODEL S 09.12-04.26

View part

MPBS Polyurethane suspension sleeve 7800204-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 80mm, quantity per set: 1pcs fits: TESLA MODEL S 09.12-04.26

View part

MPBS Polyurethane suspension sleeve 7800208-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 51mm, length 62mm, quantity per set: 1pcs fits: TESLA MODEL S, MODEL X 09.12-04.26

View part

MPBS Polyurethane suspension sleeve 7800208-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 51,5mm, quantity per set: 1pcs fits: TESLA MODEL S, MODEL X 09.12-04.26

View part

MPBS Polyurethane suspension sleeve 7800304-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 70mm, length 80mm, quantity per set: 1pcs fits: TESLA MODEL S, MODEL X 01.14-04.26

View part

MPBS Polyurethane suspension sleeve 7800304-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, quantity per set: 1pcs fits: TESLA MODEL S, MODEL X 01.14-04.26

View part

MPBS Polyurethane suspension sleeve PU FI50 75SHA 50

Polyurethane shaft - elastomer, 1pcs, hardness: 75 Sha,

View part

MPBS Polyurethane suspension sleeve PU FI50 85SHA 25

Polyurethane shaft - elastomer, 1pcs, hardness: 85 Sha,

View part

MPBS Polyurethane suspension sleeve PU FI50 85SHA 50

Polyurethane shaft - elastomer, 1pcs, hardness: 85 Sha,

View part

MPBS Polyurethane suspension sleeve PU FI60 75SHA 50

Polyurethane shaft - elastomer, 1pcs, hardness: 75 Sha,

View part

MPBS Polyurethane suspension sleeve PU FI70 75SHA 50

Polyurethane shaft - elastomer, 1pcs, hardness: 75 Sha,

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account