Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 6201315-00/80SHA

Rear transverse Swingarm bushing (inner), hardness: 80 Sha, outer diameter: 32mm, length 42,8mm, quantity per set: 1pcs fits: TOYOTA CELICA 09.89-01.94

View part

MPBS Polyurethane suspension sleeve 6201315-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 32mm, length 42,8mm fits: TOYOTA CELICA 09.89-01.94

View part

MPBS Polyurethane suspension sleeve 6201346-00/80SHA

Rear transverse Swingarm bushing front (inner), hardness: 80 Sha, outer diameter: 38,5mm, length 42,7mm, quantity per set: 1pcs fits: TOYOTA CELICA 09.89-01.94

View part

MPBS Polyurethane suspension sleeve 6201346-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38,5mm, length 42,7mm fits: TOYOTA CELICA 09.89-01.94

View part

MPBS Polyurethane suspension sleeve 6201381-00/80SHA

Rear swingarm bushing (front/ Rear), hardness: 80 Sha, outer diameter: 41,5mm, length 55mm, quantity per set: 1pcs fits: TOYOTA CELICA 09.89-01.94

View part

MPBS Polyurethane suspension sleeve 6201381-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 41,5mm, length 55mm fits: TOYOTA CELICA 09.89-01.94

View part

MPBS Polyurethane suspension sleeve 6201548-00/80SHA

Front swingarm bushing (front), hardness: 80 Sha, outer diameter: 33mm, length 60mm, quantity per set: 1pcs fits: TOYOTA CELICA 09.89-

View part

MPBS Polyurethane suspension sleeve 6201548-00/80SHA/14

Front swingarm bushing (front), hardness: 80 Sha, outer diameter: 41,5mm, quantity per set: 2pcs fits: TOYOTA CELICA 09.93-

View part

MPBS Polyurethane suspension sleeve 6201548-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 33mm, length 60mm fits: TOYOTA CELICA 09.89-11.99

View part

MPBS Polyurethane suspension sleeve 6201549-00/80SHA

Front swingarm bushing (rear), hardness: 80 Sha, outer diameter: 60mm, length 60mm, quantity per set: 1pcs fits: TOYOTA CELICA, COROLLA 09.93-

View part

MPBS Polyurethane suspension sleeve 6201549-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 60mm fits: TOYOTA CELICA, COROLLA 08.99-12.05

View part

MPBS Polyurethane suspension sleeve 6201569-00/80SHA

Rear Swingarm bushing (inner), hardness: 80 Sha, outer diameter: 41mm, length 52mm, quantity per set: 1pcs fits: TOYOTA CELICA 08.99-09.05

View part

MPBS Polyurethane suspension sleeve 6201569-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6201948-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 35,4mm, length 60mm, quantity per set: 1pcs fits: TOYOTA COROLLA 05.92-

View part

MPBS Polyurethane suspension sleeve 6201948-00/90SHA

Polyurethane bushing, hardness: 90 Sha, fits: TOYOTA COROLLA 1.3-2.0D 05.92-06.02

View part

MPBS Polyurethane suspension sleeve 6201949-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 52,7mm, length 60mm, quantity per set: 1pcs fits: TOYOTA COROLLA, PRIUS 05.95-

View part

MPBS Polyurethane suspension sleeve 6201949-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 52,7mm, length 60mm fits: TOYOTA COROLLA 05.95-06.02

View part

MPBS Polyurethane suspension sleeve 6202901-PZ/80SHA

Polyurethane bushing, hardness: 80 Sha fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 04.95-12.02

View part

MPBS Polyurethane suspension sleeve 6202901-PZ/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6202908-00/80SHA

Front upper Swingarm bushing, hardness: 80 Sha, outer diameter: 48mm, length 66mm, quantity per set: 1pcs fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 04.95-12.02

View part

MPBS Polyurethane suspension sleeve 6202908-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6202909-00/80SHA

Front lower Swingarm bushing, hardness: 80 Sha, outer diameter: 40mm, length 55mm, quantity per set: 1pcs fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 04.95-12.02

View part

MPBS Polyurethane suspension sleeve 6202909-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 55mm fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 04.95-12.02

View part

MPBS Polyurethane suspension sleeve 62029100-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 62029100-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 27,8mm, length 42mm fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 04.95-12.02

View part

MPBS Polyurethane suspension sleeve 62029181-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 45,4mm, length 60mm fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 04.95-12.02

View part

MPBS Polyurethane suspension sleeve 62029181-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45,4mm, length 60mm fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 04.95-12.02

View part

MPBS Polyurethane suspension sleeve 62029182-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40,8mm, length 55mm fits: TOYOTA LAND CRUISER 80, LAND CRUISER 90 01.90-12.02

View part

MPBS Polyurethane suspension sleeve 62029182-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40,8mm, length 55mm fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 04.95-12.02

View part

MPBS Polyurethane suspension sleeve 6203629-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6203629-00/80SHA/23

Polyurethane stabilizer bushing, 1pcs, front stabilizer, L/R, bottom, hardness: 80 Sha, fits: TOYOTA RAV 4 I 2.0 01.94-06.00

View part

MPBS Polyurethane suspension sleeve 6203629-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6204375-00/80SHA

Rear upper Swingarm bushing, hardness: 80 Sha, outer diameter: 54mm, quantity per set: 1pcs fits: TOYOTA SUPRA 05.93-07.02

View part

MPBS Polyurethane suspension sleeve 6204375-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6204829-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6204829-00/80SHA/23

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 37,5mm, quantity per set: 1pcs fits: TOYOTA YARIS, YARIS VERSO 04.99-11.05

View part

MPBS Polyurethane suspension sleeve 6204829-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6204848-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 32,7mm, length 53mm, quantity per set: 1pcs fits: TOYOTA AYGO, MR2 III, YARIS, YARIS VERSO 04.99-05.14

View part

MPBS Polyurethane suspension sleeve 6204848-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 32,7mm, length 53mm fits: TOYOTA AYGO, MR2 III, YARIS, YARIS VERSO 04.99-05.14

View part

MPBS Polyurethane suspension sleeve 6204849-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 55,7mm, length 58mm, quantity per set: 1pcs fits: TOYOTA AYGO, MR2 III, YARIS, YARIS VERSO 04.99-05.14

View part

MPBS Polyurethane suspension sleeve 6204849-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 55,7mm, length 58mm fits: TOYOTA AYGO, MR2 III, YARIS, YARIS VERSO 04.99-05.14

View part

MPBS Polyurethane suspension sleeve 62052153-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40mm, length 60mm, quantity per set: 1pcs fits: TOYOTA HILUX VII 11.04-

View part

MPBS Polyurethane suspension sleeve 62052153-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40,5mm, quantity per set: 1pcs fits: TOYOTA HILUX VII, HILUX VIII, PROACE, PROACE VERSO 02.05-

View part

MPBS Polyurethane suspension sleeve 62052154-00/80SHA

Rear leaf spring bushing, hardness: 80 Sha, outer diameter: 30mm, length 38mm, quantity per set: 1pcs fits: TOYOTA HILUX VII 11.04-

View part

MPBS Polyurethane suspension sleeve 62052154-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6205291-00/80SHA

Rear leaf spring bushing, hardness: 80 Sha, outer diameter: 30mm, length 52mm, quantity per set: 1pcs fits: TOYOTA HILUX VII 11.04-

View part

MPBS Polyurethane suspension sleeve 6205291-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6205348-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 48mm, length 70mm, quantity per set: 1pcs fits: VOLVO S60 I, S80 I, V70 II, XC70 I HYUNDAI HIGHWAY, SANTA FÉ I, TRAJET 11.97-01.18

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account