Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 6205348-00/90SHA

Front Swingarm bushing, hardness: 90 Sha, outer diameter: 48mm, length 70mm, quantity per set: 1pcs fits: VOLVO S60 I, S80 I, V70 II, XC70 I HYUNDAI HIGHWAY, SANTA FÉ I, TRAJET 11.97-01.18

View part

MPBS Polyurethane suspension sleeve 6205349-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 56mm, length 89mm, quantity per set: 1pcs fits: BMW X3 (G01), X3 (G01, F97, G08), X4 (G02, F98) TOYOTA FJ CRUISER 09.02-

View part

MPBS Polyurethane suspension sleeve 6205349-00/90SHA

Front Swingarm bushing (rear), hardness: 90 Sha, outer diameter: 56mm, length 89mm, quantity per set: 1pcs fits: BMW X3 (G01), X3 (G01, F97, G08), X4 (G02, F98) TOYOTA FJ CRUISER 09.02-

View part

MPBS Polyurethane suspension sleeve 6501151-00/80SHA

Muffler hanger, 1pcs, exhaust silencer, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 6501151-00/80SHA/10

Muffler hanger, 1pcs, exhaust silencer, hardness: 80 Sha, fits: AUDI A1, A3 FORD FIESTA V, FIESTA VI, FUSION, GALAXY I, KUGA I, TRANSIT MAZDA 2 SEAT ALHAMBRA, ALTEA XL, AROSA 1.0-3.2D 09.88-08.19

View part

MPBS Polyurethane suspension sleeve 6501151-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501201-4X4/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501201-4X4/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501201/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501201/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501233-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 39,5mm, quantity per set: 4pcs fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, TOLEDO I SKODA FELICIA I, FELICIA II 08.83-01.04

View part

MPBS Polyurethane suspension sleeve 6501233-00/90SHA

Polyurethane bushing fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, TOLEDO I VW GOLF II, JETTA II 08.83-12.02

View part

MPBS Polyurethane suspension sleeve 6501251-00/80SHA

Muffler hanger, 1pcs, exhaust silencer, hardness: 80 Sha, fits: AUDI 100 C2, 100 C3, 100 C4, 200 C3, 80 B2, 80 B3, 90 B2, A6 C4 DAEWOO LEGANZA LADA SAMARA SEAT TERRA 0.9-4.2 05.73-12.13

View part

MPBS Polyurethane suspension sleeve 6501251-00/90SHA

Polyurethane bushing,

View part

MPBS Exhaust system hanger 6501251B-00/60SHA

Exhaust system hanger fits: VW GOLF II 1.0-1.8 08.83-12.92

View part

MPBS Polyurethane suspension sleeve 6501251B-00/80SHA

Muffler hanger, 1pcs, exhaust silencer, hardness: 80 Sha, fits: AUDI 100 C2, 100 C3, 100 C4, 200 C3, 80 B2, 80 B3, 90 B2, A6 C4 DAEWOO LEGANZA LADA SAMARA SEAT TERRA 0.9-4.2 05.73-12.13

View part

MPBS Polyurethane suspension sleeve 6501251B-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501253-00/80SHA

Rear beam bushings 45mm, outer diameter: 45mm, length 90mm, quantity per set: 2pcs fits: SEAT TOLEDO I VW CORRADO, GOLF II 08.83-03.99

View part

MPBS Polyurethane suspension sleeve 6501253-00/90SHA

Polyurethane bushing, outer diameter: 45mm, length 90mm fits: SEAT TOLEDO I VW CORRADO, GOLF II 08.83-03.99

View part

MPBS Polyurethane suspension sleeve 6501301-4X4/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501301-4X4/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501301/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501301/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501302-17/80SHA

Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 12pcs fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF II 08.83-01.04

View part

MPBS Polyurethane suspension sleeve 6501302-17/90SHA

Polyurethane suspension bushings set, hardness: 90 Sha, quantity per set: 10pcs fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF II 08.83-01.04

View part

MPBS Polyurethane suspension sleeve 6501302-19/80SHA

Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 12pcs fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF II 08.83-01.04

View part

MPBS Polyurethane suspension sleeve 6501302-19/90SHA

Polyurethane suspension bushings set, hardness: 90 Sha, quantity per set: 10pcs fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF II 08.83-01.04

View part

MPBS Polyurethane suspension sleeve 6501302 80SHA

Polyurethane bushing fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF II, GOLF III, JETTA II, PASSAT B3/B4, VENTO 08.83-01.04

View part

MPBS Polyurethane suspension sleeve 6501302/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 65013128-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 50mm, quantity per set: 1pcs fits: AUDI A3 SEAT LEON, TOLEDO II SKODA OCTAVIA I VW BORA, BORA I, GOLF IV 09.96-12.13

View part

MPBS Polyurethane suspension sleeve 65013128-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 50mm, quantity per set: 1pcs fits: AUDI A3 SEAT LEON, TOLEDO II SKODA OCTAVIA I VW BORA, BORA I, GOLF IV 09.96-12.13

View part

MPBS Polyurethane suspension sleeve 6501329-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501329-00/80SHA/17

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36,5mm, quantity per set: 2pcs fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I VW CADDY II 08.83-01.04

View part

MPBS Polyurethane suspension sleeve 6501329-00/80SHA/19

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36,5mm, quantity per set: 2pcs fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I VW CADDY II 08.83-01.04

View part

MPBS Polyurethane suspension sleeve 6501329-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501329A 4X4-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 45,5mm, quantity per set: 1pcs fits: VW GOLF II, GOLF III, JETTA II 01.84-04.99

View part

MPBS Polyurethane suspension sleeve 6501329A-4X4-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501329B 4X4-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 39,5mm, quantity per set: 1pcs fits: VW GOLF II, GOLF III, JETTA II 01.84-04.99

View part

MPBS Polyurethane suspension sleeve 6501329B-4X4-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501333-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501333-00/80SHA/17

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 37mm, quantity per set: 1pcs fits: AUDI A3 SEAT ALTEA, CORDOBA, IBIZA II, TOLEDO I, TOLEDO III SKODA OCTAVIA II 08.83-06.24

View part

MPBS Polyurethane suspension sleeve 6501333-00/80SHA/19

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 37mm, quantity per set: 1pcs fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW GOLF II, GOLF III, GOLF IV, JETTA II, VENTO 08.83-10.02

View part

MPBS Polyurethane suspension sleeve 6501333-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6501349-00/80SHA

Front 17mm Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 67mm, quantity per set: 2pcs fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I VW CADDY II 08.83-01.04

View part

MPBS Polyurethane suspension sleeve 6501349-00/90SHA

Polyurethane bushing fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF II, GOLF III, JETTA II, PASSAT B3/B4 08.83-01.04

View part

MPBS Polyurethane suspension sleeve 6501349-00/90SHA/17

Front 17mm Swingarm bushing (rear), 2pcs, front bottom swingarm, L/R, bottom, hardness: 90 Sha,

View part

MPBS Polyurethane suspension sleeve 6501353-00/80SHA

Rear beam bushings 57mm, outer diameter: 57mm, length 90mm, quantity per set: 2pcs, without station wagon fits: SEAT TOLEDO I VW CORRADO, GOLF III, VENTO 05.91-03.99

View part

MPBS Polyurethane suspension sleeve 6501353-00/90SHA

Polyurethane bushing, outer diameter: 57mm, length 90mm fits: SEAT TOLEDO I VW CORRADO, GOLF III, VENTO 05.91-03.99

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account