Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 6000867-00/80SHA

Front leaf spring bushing, hardness: 80 Sha, outer diameter: 30mm, length 28mm, quantity per set: 1pcs fits: SUZUKI SAMURAI 04.88-12.04

View part

MPBS Polyurethane suspension sleeve 6000867-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6000868-00/80SHA

Front leaf spring bushing, hardness: 80 Sha, outer diameter: 43mm, length 65mm, quantity per set: 1pcs fits: SUZUKI SAMURAI, SJ410, SJ413 09.81-

View part

MPBS Polyurethane suspension sleeve 6000868-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 43mm, length 65mm fits: SUZUKI SAMURAI 04.88-12.04

View part

MPBS Polyurethane suspension sleeve 6001649-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 60,2mm, length 51mm fits: FIAT SEDICI OPEL AGILA B SUZUKI SX4 06.06-

View part

MPBS Polyurethane suspension sleeve 6001649-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60,2mm, length 51mm fits: FIAT SEDICI OPEL AGILA B SUZUKI SX4 06.06-

View part

MPBS Polyurethane suspension sleeve 6001801-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6001801/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 60018100-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 60018100-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 30mm, length 40mm fits: SUZUKI GRAND VITARA I 03.98-09.05

View part

MPBS Polyurethane suspension sleeve 6001829-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6001829-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6001833-00/80SHA

Polyurethane bushing fits: SUZUKI GRAND VITARA I, VITARA 07.88-09.05

View part

MPBS Polyurethane suspension sleeve 6001833-00/90SHA

Polyurethane bushing fits: SUZUKI GRAND VITARA I, VITARA 07.88-09.05

View part

MPBS Polyurethane suspension sleeve 6001848-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 39mm, length 65mm fits: SUZUKI VITARA 07.88-03.99

View part

MPBS Polyurethane suspension sleeve 6001848-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 39mm, length 65mm fits: SUZUKI VITARA 07.88-03.99

View part

MPBS Polyurethane suspension sleeve 6001849-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 45mm, length 65mm fits: SUZUKI VITARA 07.88-03.99

View part

MPBS Polyurethane suspension sleeve 6001849-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45mm, length 65mm fits: SUZUKI VITARA 07.88-03.99

View part

MPBS Polyurethane suspension sleeve 6001870-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 39mm, length 65mm fits: SUZUKI VITARA 07.88-10.02

View part

MPBS Polyurethane suspension sleeve 6001870-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 39mm, length 65mm fits: SUZUKI VITARA 07.88-10.02

View part

MPBS Suspension sleeve 6001881-00/80SHA

Suspension sleeves, 1pcs, fitting position: rear, trailing arm, hardness: 80 Sha fits: SUZUKI GRAND VITARA I, JIMNY, VITARA 1.3-2.7 07.88-

View part

MPBS Suspension sleeve 6001881-00/90SHA

Suspension sleeves, 1pcs, fitting position: rear, trailing arm, hardness: 90 Sha fits: SUZUKI GRAND VITARA I, JIMNY, VITARA 1.3-2.7 07.88-

View part

MPBS Polyurethane suspension sleeve 60021145-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 60021145-00/90SHA

Polyurethane spring washer, hardness: 90 Sha, outer diameter: 156mm, quantity per set: 1pcs fits: SUZUKI GRAND VITARA II 04.05-

View part

MPBS Polyurethane suspension sleeve 60021146-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 60021146-00/90SHA

Polyurethane spring washer, hardness: 90 Sha, outer diameter: 108,5mm, quantity per set: 1pcs fits: SUZUKI GRAND VITARA II 04.05-

View part

MPBS Polyurethane suspension sleeve 6002148-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 35,5mm, length 70mm fits: SUZUKI GRAND VITARA II 04.05-

View part

MPBS Polyurethane suspension sleeve 6002148-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 35,5mm, length 70mm fits: SUZUKI GRAND VITARA II 04.05-

View part

MPBS Polyurethane suspension sleeve 6002149-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 65,4mm, length 60mm fits: SUZUKI GRAND VITARA II 04.05-

View part

MPBS Polyurethane suspension sleeve 6002149-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 65,4mm, length 60mm fits: SUZUKI GRAND VITARA II 04.05-

View part

MPBS Polyurethane suspension sleeve 6200349-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 68mm, length 60mm fits: LEXUS CT, HS, NX TOYOTA AURIS, PRIUS, RAV 4 IV, VERSO 10.06-

View part

MPBS Polyurethane suspension sleeve 6200349-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 68mm, length 60mm fits: LEXUS CT, HS, NX TOYOTA AURIS, PRIUS, RAV 4 IV, VERSO 10.06-

View part

MPBS Polyurethane suspension sleeve 6200353-00/80SHA

Polyurethane bushing, outer diameter: 69mm, length 84mm, quantity per set: 1pcs fits: TOYOTA AURIS, COROLLA, PRIUS, PRIUS PLUS, VERSO 10.06-

View part

MPBS Polyurethane suspension sleeve 6200353-00/90SHA

Polyurethane bushing, outer diameter: 69mm, length 84mm, quantity per set: 1pcs fits: TOYOTA AURIS, COROLLA, PRIUS, PRIUS PLUS, VERSO 10.06-

View part

MPBS Polyurethane suspension sleeve 62006161-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 42,7mm, length 67mm fits: TOYOTA AVENSIS 01.03-11.08

View part

MPBS Polyurethane suspension sleeve 62006161-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 42,7mm, length 67mm fits: TOYOTA AVENSIS 01.03-11.08

View part

MPBS Polyurethane suspension sleeve 6200649-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 68mm, length 60mm fits: TOYOTA AVENSIS, COROLLA, COROLLA VERSO 01.01-03.09

View part

MPBS Polyurethane suspension sleeve 6200649-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 68mm, length 60mm fits: TOYOTA AVENSIS, COROLLA, COROLLA VERSO 01.01-03.09

View part

MPBS Polyurethane suspension sleeve 6200661-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 35,3mm, length 43mm fits: TOYOTA AVENSIS 01.03-11.08

View part

MPBS Polyurethane suspension sleeve 6200661-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 35,3mm, length 43mm fits: TOYOTA AVENSIS 01.03-11.08

View part

MPBS Polyurethane suspension sleeve 6200674A-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 24,3mm, quantity per set: 1pcs fits: TOYOTA AVENSIS 01.03-11.08

View part

MPBS Polyurethane suspension sleeve 6200674A-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6200674AB-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6200674AB-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6200674B-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 26,4mm, quantity per set: 1pcs fits: TOYOTA AVENSIS 01.03-11.08

View part

MPBS Polyurethane suspension sleeve 6200674B-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 62013106-00/80SHA

Front / rear Swingarm bushing (outer), hardness: 80 Sha, outer diameter: 38,5mm, length 43mm, quantity per set: 1pcs fits: TOYOTA CELICA 09.89-01.94

View part

MPBS Polyurethane suspension sleeve 62013106-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38,5mm, length 43mm fits: TOYOTA CELICA 09.89-01.94

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account