Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 59012129A-00/90SHA/1

Polyurethane pad, hardness: 90 Sha, outer diameter: 107mm, length 139mm, quantity per set: 1pcs fits: SUBARU LEGACY III, LEGACY IV, OUTBACK 10.98-03.12

View part

MPBS Polyurethane suspension sleeve 59012129A-00/90SHA/2

Polyurethane pad, hardness: 90 Sha, outer diameter: 107mm, length 139mm, quantity per set: 1pcs fits: SUBARU LEGACY III, LEGACY IV, OUTBACK 10.98-03.12

View part

MPBS Polyurethane suspension sleeve 59012129A-00/90SHA/3

Polyurethane pad, hardness: 90 Sha, outer diameter: 107mm, length 139mm, quantity per set: 1pcs fits: SUBARU LEGACY III, LEGACY IV, OUTBACK 10.98-03.12

View part

MPBS Polyurethane suspension sleeve 59012129A-00/90SHA/4

Polyurethane pad, hardness: 90 Sha, outer diameter: 107mm, length 139mm, quantity per set: 1pcs fits: SUBARU LEGACY III, LEGACY IV, OUTBACK 10.98-03.12

View part

MPBS Polyurethane suspension sleeve 59012129B-00/90SHA/1

Polyurethane pad, hardness: 90 Sha, length 139mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY III, LEGACY IV, OUTBACK 08.92-10.12

View part

MPBS Polyurethane suspension sleeve 59012129B-00/90SHA/2

Polyurethane pad, hardness: 90 Sha, length 139mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY III, LEGACY IV, OUTBACK 08.92-10.12

View part

MPBS Polyurethane suspension sleeve 59012129B-00/90SHA/3

Polyurethane pad, hardness: 90 Sha, length 139mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY III, LEGACY IV, OUTBACK 08.92-10.12

View part

MPBS Polyurethane suspension sleeve 59012129B-00/90SHA/4

Polyurethane pad, hardness: 90 Sha, length 139mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY III, LEGACY IV, OUTBACK 08.92-10.12

View part

MPBS Polyurethane suspension sleeve 59014129A-00/90SHA/1

Polyurethane pad, hardness: 90 Sha, outer diameter: 119mm, length 131mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA 03.97-10.12

View part

MPBS Polyurethane suspension sleeve 59014129A-00/90SHA/2

Polyurethane pad, hardness: 90 Sha, outer diameter: 119mm, length 131mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA 03.97-10.12

View part

MPBS Polyurethane suspension sleeve 59014129A-00/90SHA/3

Polyurethane pad, hardness: 90 Sha, outer diameter: 119mm, length 131mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA 03.97-10.12

View part

MPBS Polyurethane suspension sleeve 59014129A-00/90SHA/4

Polyurethane pad, hardness: 90 Sha, outer diameter: 119mm, length 131mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA 03.97-10.12

View part

MPBS Polyurethane suspension sleeve 5901502/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5901502/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 59015123-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 34,4mm, length 42mm fits: SUBARU BRZ, FORESTER, IMPREZA, LEGACY IV, LEGACY V, LEGACY VI, LEVORG, OUTBACK, WRX, XV TOYOTA GT 86 09.03-

View part

MPBS Polyurethane suspension sleeve 59015123-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 34,4mm, length 42mm fits: SUBARU BRZ, FORESTER, IMPREZA, LEGACY IV, LEGACY V, LEGACY VI, LEVORG, OUTBACK, WRX, XV TOYOTA GT 86 09.03-

View part

MPBS Shock absorber bracket 59015129A-00/95SHA/3

Shock absorber bracket rear L/R SUBARU FORESTER 01.08-

View part

MPBS Polyurethane suspension sleeve 5901516-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 52,4mm, length 60mm fits: SUBARU FORESTER, IMPREZA, LEGACY V, OUTBACK 04.07-

View part

MPBS Polyurethane suspension sleeve 5901516-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 52,4mm, length 60mm fits: SUBARU FORESTER, IMPREZA, LEGACY V, OUTBACK 04.07-

View part

MPBS Wheel suspension track control arm, rear 59015165A-00/80SHA

Rear axle track control arm (top, rear) fits: SUBARU BRZ, FORESTER, IMPREZA, LEGACY V, OUTBACK, TRIBECA TOYOTA GT 86 1.5-3.6 01.05-

View part

MPBS Polyurethane suspension sleeve 59015165A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 34,4mm, length 50mm fits: SUBARU BRZ, FORESTER, IMPREZA, LEGACY V, OUTBACK, TRIBECA TOYOTA GT 86 01.05-

View part

MPBS Polyurethane suspension sleeve 59015165B-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 34,4mm, length 60mm fits: SUBARU BRZ, FORESTER, IMPREZA, LEGACY V, OUTBACK, TRIBECA TOYOTA GT 86 01.05-

View part

MPBS Polyurethane suspension sleeve 59015165B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 34,4mm, length 60mm fits: SUBARU BRZ, FORESTER, IMPREZA, LEGACY V, OUTBACK, TRIBECA TOYOTA GT 86 01.05-

View part

MPBS Polyurethane suspension sleeve 5901516B-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40,4mm, length 48mm fits: SUBARU BRZ, FORESTER, IMPREZA, LEGACY V, OUTBACK, TRIBECA TOYOTA GT 86 01.05-

View part

MPBS Polyurethane suspension sleeve 5901516B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40,4mm, length 48mm fits: SUBARU FORESTER, IMPREZA, LEGACY V, OUTBACK, TRIBECA 01.05-

View part

MPBS Front track control arm silent block 5901548-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, quantity per set: 1pcs fits: HYUNDAI HIGHWAY, SANTA FÉ I, TRAJET SUBARU FORESTER, IMPREZA, LEGACY IV, LEGACY V, OUTBACK, TRIBECA, WRX 03.00-

View part

MPBS Front track control arm silent block 5901548-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, quantity per set: 1pcs fits: HYUNDAI HIGHWAY, SANTA FÉ I, TRAJET SUBARU FORESTER, IMPREZA, LEGACY IV, LEGACY V, OUTBACK, TRIBECA, WRX 03.00-

View part

MPBS Polyurethane suspension sleeve 5901548-00/CS-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5901548-00/CS-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5901549-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 60mm, length 57mm fits: SUBARU FORESTER, IMPREZA, LEGACY IV, LEGACY V, LEVORG, OUTBACK, XV 09.03-

View part

MPBS Polyurethane suspension sleeve 5901549-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 57mm fits: SUBARU FORESTER, IMPREZA, LEGACY IV, LEGACY V, LEVORG, OUTBACK, XV 09.03-

View part

MPBS Polyurethane suspension sleeve 59019129B-00/90SHA/1

Polyurethane pad, hardness: 90 Sha, length 153mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY IV, LEGACY V, OUTBACK 09.03-

View part

MPBS Polyurethane suspension sleeve 59019129B-00/90SHA/2

Polyurethane pad, hardness: 90 Sha, length 153mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY IV, LEGACY V, OUTBACK 09.03-

View part

MPBS Polyurethane suspension sleeve 59019129B-00/90SHA/3

Polyurethane pad, hardness: 90 Sha, length 153mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY IV, LEGACY V, OUTBACK 09.03-

View part

MPBS Polyurethane suspension sleeve 59019129B-00/90SHA/4

Polyurethane pad, hardness: 90 Sha, length 153mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY IV, LEGACY V, OUTBACK 09.03-

View part

MPBS Polyurethane suspension sleeve 60003147-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 60003147-00/90SHA

Polyurethane spring washer, hardness: 90 Sha, outer diameter: 105mm, quantity per set: 1pcs fits: SUZUKI GRAND VITARA I 03.98-

View part

MPBS Polyurethane suspension sleeve 6000501-PZ/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 60005179-00/80SHA

Polyurethane bushing,

View part

MPBS Suspension sleeve 60005179-00/90SHA

Suspension sleeves L/R, 1pcs, fitting position: front/rear, Panhard rod, hardness: 90 Sha fits: SUZUKI JIMNY 1.3/1.5D 09.98-

View part

MPBS Polyurethane suspension sleeve 60005184-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 100mm, length 40mm fits: SUZUKI JIMNY 09.98-

View part

MPBS Polyurethane suspension sleeve 60005184-00/90SHA

Polyurethane bushing, hardness: 90 Sha, fits: SUZUKI JIMNY 1.3/1.5D 09.98-

View part

MPBS Polyurethane suspension sleeve 6000552-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 52mm, length 60mm fits: SUZUKI JIMNY 09.98-

View part

MPBS Polyurethane suspension sleeve 6000552-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 52mm, length 60mm fits: SUZUKI JIMNY 09.98-

View part

MPBS Polyurethane suspension sleeve 6000581-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 52mm, length 65mm fits: SUZUKI JIMNY, VITARA 07.88-

View part

MPBS Polyurethane suspension sleeve 6000581-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 52mm, length 65mm fits: SUZUKI JIMNY, VITARA 07.88-

View part

MPBS Polyurethane suspension sleeve 6000801-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6000801/90SHA

Polyurethane bushing,

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account