Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 5400101/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5400103/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 54001125-00/80SHA

Rear transverse Swingarm bushing (inner), hardness: 80 Sha, outer diameter: 45,4mm, length 47mm, quantity per set: 1pcs fits: SAAB 9-3 09.02-02.15

View part

MPBS Polyurethane suspension sleeve 54001125-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45,4mm, length 47mm fits: SAAB 9-3 09.02-02.15

View part

MPBS Polyurethane suspension sleeve 5400201/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5400201/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5400202/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5400202/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5400249A-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 62,6mm, length 66,5mm, quantity per set: 1pcs fits: SAAB 9-5 09.97-12.09

View part

MPBS Polyurethane suspension sleeve 5400249A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 62,6mm, length 66,5mm, quantity per set: 1pcs fits: SAAB 9-5 09.97-12.09

View part

MPBS Polyurethane suspension sleeve 5400249B-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 52,4mm, length 60mm, quantity per set: 1pcs fits: SAAB 9-5 09.97-12.09

View part

MPBS Polyurethane suspension sleeve 5400249B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 52,4mm, length 60mm, quantity per set: 1pcs fits: SAAB 9-5 09.97-12.09

View part

MPBS Polyurethane suspension sleeve 5400510-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 58,5mm, length 58,5mm, quantity per set: 1pcs fits: SAAB 900 II, 9-3 07.93-08.03

View part

MPBS Polyurethane suspension sleeve 5400510-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 58,5mm, length 58,5mm, quantity per set: 1pcs fits: SAAB 900 II, 9-3 07.93-08.03

View part

MPBS Polyurethane suspension sleeve 5600229-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5600229-00/80SHA/16

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: AUDI A1 SEAT IBIZA III, IBIZA IV, IBIZA IV SC, IBIZA IV ST SKODA FABIA I 08.99-10.18

View part

MPBS Polyurethane suspension sleeve 5600229-00/80SHA/17

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: AUDI A1 SEAT IBIZA III, IBIZA IV, IBIZA IV SC, IBIZA IV ST SKODA FABIA I 08.99-10.18

View part

MPBS Polyurethane suspension sleeve 5600229-00/80SHA/18

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: AUDI A1 SEAT IBIZA III, IBIZA IV, IBIZA IV SC, IBIZA IV ST SKODA FABIA I 08.99-10.18

View part

MPBS Polyurethane suspension sleeve 5600229-00/80SHA/20

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: AUDI A1 SEAT IBIZA III, IBIZA IV, IBIZA IV SC, IBIZA IV ST SKODA FABIA I 08.99-10.18

View part

MPBS Polyurethane suspension sleeve 5600229-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: AUDI A1 SEAT IBIZA III, IBIZA IV, IBIZA IV SC, IBIZA IV ST SKODA FABIA I 08.99-10.18

View part

MPBS Polyurethane suspension sleeve 5600229-00/80SHA/23

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: AUDI A1 SEAT IBIZA III, IBIZA IV, IBIZA IV SC, IBIZA IV ST SKODA FABIA I 08.99-10.18

View part

MPBS Polyurethane suspension sleeve 5600229-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5601349-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 64,8mm, length 50mm, quantity per set: 1pcs fits: SKODA OCTAVIA II, SUPERB II, YETI VW BEETLE, CADDY ALLTRACK IV 02.04-12.20

View part

MPBS Polyurethane suspension sleeve 5601349-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 64,8mm, length 50mm fits: SKODA OCTAVIA II, SUPERB II, YETI VW BEETLE, CADDY ALLTRACK IV, CADDY IV 02.04-12.20

View part

MPBS Polyurethane suspension sleeve 5900473-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 56mm, length 51mm fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II 01.89-10.12

View part

MPBS Polyurethane suspension sleeve 5900473-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 56mm, length 51mm fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II 01.89-10.12

View part

MPBS Polyurethane suspension sleeve 59005107-00/80SHA

Polyurethane rear swingarm bushing, hardness: 80 Sha, outer diameter: 54,9mm, length 60mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II 01.89-10.12

View part

MPBS Polyurethane suspension sleeve 59005107-00/90SHA

Polyurethane rear swingarm bushing, hardness: 90 Sha, outer diameter: 54,9mm, length 60mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II 01.89-10.12

View part

MPBS Polyurethane suspension sleeve 5900553-00/80SHA

Polyurethane rear beam bushing, outer diameter: 64mm, length 57mm, quantity per set: 1pcs fits: SUBARU IMPREZA, LEGACY I, LEGACY II 01.89-06.09

View part

MPBS Polyurethane suspension sleeve 5900553-00/90SHA

Polyurethane rear beam bushing, outer diameter: 64mm, length 57mm, quantity per set: 1pcs fits: SUBARU IMPREZA, LEGACY I, LEGACY II 01.89-06.09

View part

MPBS Polyurethane suspension sleeve 5900577-00/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 40,4mm, length 48mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II 01.89-06.09

View part

MPBS Polyurethane suspension sleeve 5900577-00/90SHA

Polyurethane suspension sleeve, hardness: 90 Sha, outer diameter: 40,4mm, length 48mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II 01.89-06.09

View part

MPBS Polyurethane suspension sleeve 5900579-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 55mm, quantity per set: 1pcs fits: SUBARU IMPREZA, LEGACY I, LEGACY II 01.89-06.09

View part

MPBS Polyurethane suspension sleeve 5900579-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 55mm, quantity per set: 1pcs fits: SUBARU IMPREZA, LEGACY I, LEGACY II 01.89-06.09

View part

MPBS Polyurethane suspension sleeve 5900588-00/80SHA/12

Polyurethane bushing, hardness: 80 Sha, outer diameter: 34mm, length 40mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II 01.89-06.09

View part

MPBS Polyurethane suspension sleeve 5900588-00/80SHA/14

Polyurethane bushing, hardness: 80 Sha, outer diameter: 34mm, length 40mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II 01.89-06.09

View part

MPBS Polyurethane suspension sleeve 5900588-00/90SHA/12

Polyurethane bushing, hardness: 90 Sha, outer diameter: 34mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY II 08.92-06.09

View part

MPBS Polyurethane suspension sleeve 5900588-00/90SHA/14

Polyurethane bushing, hardness: 90 Sha, outer diameter: 34mm, length 40mm, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II 01.89-06.09

View part

MPBS Polyurethane suspension sleeve 5900588-12-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5900588-12-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5900588-14-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5900588-14-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5900829-00/80SHA/19

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY III, LEGACY OUTBACK, OUTBACK 02.94-

View part

MPBS Polyurethane suspension sleeve 5900829-00/90SHA/19

Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 1pcs fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY III, LEGACY OUTBACK, OUTBACK 02.94-

View part

MPBS Polyurethane suspension sleeve 5900829-P-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5900829-P-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5900829-T-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5900829-T-00/90SHA

Polyurethane bushing,

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account