Partios Wholesale catalogue
Mpbs Distributor | Suspension & Steering
Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)
2,629 current catalogue lines
About the MPBS range
Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MPBS Polyurethane suspension sleeve 5102753-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5102829-00/80SHA
Polyurethane bushing fits: RENAULT MEGANE, MEGANE III 11.08-03.17
View partMPBS Polyurethane suspension sleeve 5102829-00/80SHA/20
Polyurethane stabilizer bushing, 1pcs, stabilizer, L/R, front axle, hardness: 80 Sha,
View partMPBS Polyurethane suspension sleeve 5102829-00/90SHA
Polyurethane stabilizer bushing, hardness: 90 Sha fits: RENAULT MEGANE, MEGANE III 11.08-03.17
View partMPBS Polyurethane suspension sleeve 5102849-58-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 58mm, length 65mm fits: RENAULT FLUENCE, GRAND SCENIC III, MEGANE, MEGANE III, SCENIC III 11.08-
View partMPBS Polyurethane suspension sleeve 5102849-58-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 58mm, length 65mm fits: RENAULT FLUENCE, GRAND SCENIC III, MEGANE, MEGANE III, SCENIC III 11.08-
View partMPBS Polyurethane suspension sleeve 5102849-70-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 70mm, length 65mm fits: RENAULT FLUENCE, GRAND SCENIC III, MEGANE, MEGANE III, SCENIC III 11.08-
View partMPBS Polyurethane suspension sleeve 5102849-70-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 70mm, length 65mm fits: RENAULT FLUENCE, GRAND SCENIC III, MEGANE, MEGANE III, SCENIC III 11.08-
View partMPBS Polyurethane suspension sleeve 5103602-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5103602-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 51036100-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 51036100-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 44mm fits: OPEL VIVARO A RENAULT TRAFIC II 02.01-
View partMPBS Polyurethane suspension sleeve 5103629-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5103629-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5103653-00/80SHA
Polyurethane rear beam bushing, outer diameter: 70,4mm, length 70mm, quantity per set: 1pcs fits: NISSAN PRIMASTAR OPEL VIVARO A RENAULT TRAFIC II 02.01-
View partMPBS Polyurethane suspension sleeve 5103653-00/90SHA
Polyurethane rear beam bushing, outer diameter: 70,4mm, length 70mm, quantity per set: 1pcs fits: NISSAN PRIMASTAR OPEL VIVARO A RENAULT TRAFIC II 02.01-
View partMPBS Polyurethane suspension sleeve 51038138-00/80SHA
Rear transverse Swingarm bushing (outer), hardness: 80 Sha, outer diameter: 47,3mm, length 89mm, quantity per set: 1pcs fits: RENAULT VEL SATIS 06.02-08.09
View partMPBS Polyurethane suspension sleeve 51038138-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 47,3mm, length 89mm fits: RENAULT VEL SATIS 06.02-08.09
View partMPBS Polyurethane suspension sleeve 51038142-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 37,7mm, length 86mm fits: RENAULT VEL SATIS 06.02-08.09
View partMPBS Polyurethane suspension sleeve 51038142-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 37,7mm, length 86mm fits: RENAULT VEL SATIS 06.02-08.09
View partMPBS Polyurethane suspension sleeve 5103830-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5103830-00/80SHA/19
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 48mm, quantity per set: 1pcs fits: RENAULT VEL SATIS 06.02-08.09
View partMPBS Polyurethane suspension sleeve 5103830-00/80SHA/21
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 48mm, quantity per set: 1pcs fits: RENAULT VEL SATIS 06.02-08.09
View partMPBS Polyurethane suspension sleeve 5103830-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5103881-00/80SHA
Rear Swingarm bushing, hardness: 80 Sha, outer diameter: 51mm, length 61mm, quantity per set: 1pcs fits: RENAULT VEL SATIS 06.02-08.09
View partMPBS Polyurethane suspension sleeve 5103881-00/90SHA
Polyurethane bushing, trailing arm, hardness: 90 Sha, fits: RENAULT VEL SATIS 2.0-3.5 06.02-08.09
View partMPBS Polyurethane suspension sleeve 5104097-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 93,5mm, length 65mm, quantity per set: 1pcs fits: RVI MIDLUM 01.00-
View partMPBS Polyurethane suspension sleeve 5104097-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5104097B-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 60mm, length 67mm fits: RVI PREMIUM 2 VOLVO FE 10.05-
View partMPBS Polyurethane suspension sleeve 5104097B-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5104207-00/80SHA
Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 55,4mm, length 79mm, quantity per set: 1pcs fits: NISSAN INTERSTAR OPEL MOVANO A RENAULT MASTER II 12.97-
View partMPBS Polyurethane suspension sleeve 5104207-00/90SHA
Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 55,4mm, quantity per set: 1pcs fits: NISSAN INTERSTAR OPEL MOVANO A RENAULT MASTER II 12.97-
View partMPBS Polyurethane suspension sleeve 5104252-00/80SHA
Polyurethane bushing, hardness: 80 Sha, fits: NISSAN INTERSTAR OPEL MOVANO A RENAULT MASTER II 1.9D-3.0D 12.97-
View partMPBS Polyurethane suspension sleeve 5104252-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5104348-00/80SHA
Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 48,5mm, length 64mm, quantity per set: 1pcs fits: NISSAN INTERSTAR, NV400 OPEL MOVANO B RENAULT MASTER III 02.10-
View partMPBS Polyurethane suspension sleeve 5104348-00/90SHA
Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 48,5mm, quantity per set: 1pcs fits: OPEL MOVANO B RENAULT MASTER III 02.10-
View partMPBS Polyurethane suspension sleeve 5104349-00/80SHA
Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 70,2mm, length 77mm, quantity per set: 1pcs fits: NISSAN INTERSTAR, NV400 OPEL MOVANO B RENAULT MASTER III 02.10-
View partMPBS Polyurethane suspension sleeve 5104349-00/90SHA
Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 70mm, quantity per set: 1pcs fits: OPEL MOVANO B RENAULT MASTER III 02.10-
View partMPBS Polyurethane suspension sleeve 5104402-PZ-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5104402-PZ/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5104449-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 76,4mm, length 75mm fits: RENAULT GRAND SCENIC IV, MEGANE IV, SCENIC IV, TALISMAN 06.15-
View partMPBS Polyurethane suspension sleeve 5104449-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 76,4mm, length 75mm fits: RENAULT GRAND SCENIC IV, MEGANE IV, SCENIC IV, TALISMAN 06.15-
View partMPBS Polyurethane suspension sleeve 5104549-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 58,1mm, length 75mm fits: RENAULT GRAND SCENIC IV, MEGANE IV, SCENIC IV, TALISMAN 06.15-
View partMPBS Polyurethane suspension sleeve 5104549-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 58,1mm, length 75mm fits: RENAULT GRAND SCENIC IV, MEGANE IV, SCENIC IV, TALISMAN 06.15-
View partMPBS Polyurethane suspension sleeve 51046128-00/80SHA
Polyurethane bushing fits: NISSAN PRIMASTAR OPEL VIVARO A, VIVARO B RENAULT ESPACE IV, LAGUNA II, TRAFIC II 02.01-
View partMPBS Polyurethane suspension sleeve 51046128-00/90SHA
Polyurethane bushing, fits: NISSAN PRIMASTAR OPEL VIVARO A, VIVARO B RENAULT ESPACE IV, LAGUNA II, TRAFIC II 1.6-3.5 02.01-
View partMPBS Polyurethane suspension sleeve 5300349-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 66mm, length 32,6mm, quantity per set: 1pcs fits: MG ZT, ZT- T ROVER 75, 75 I 02.99-10.05
View partMPBS Polyurethane suspension sleeve 5300349-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 66mm, length 32,6mm, quantity per set: 1pcs fits: MG ZT, ZT- T ROVER 75, 75 I 02.99-10.05
View partBuying with Partios
Buying MPBS parts through Partios
Are these genuine MPBS parts?
- Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MPBS parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.
Do you supply MPBS parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MPBS parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MPBS order?
- It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MPBS parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account