Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 5102229-00/80SHA/20

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: RENAULT LAGUNA II 03.01-12.07

View part

MPBS Polyurethane suspension sleeve 5102229-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102229B-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102229B-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 1pcs fits: RENAULT ESPACE IV, LAGUNA II, VEL SATIS 06.02-08.09

View part

MPBS Polyurethane suspension sleeve 5102229B-00/80SHA/23

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: RENAULT ESPACE IV, LAGUNA II, VEL SATIS 06.02-08.09

View part

MPBS Polyurethane suspension sleeve 5102229B-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102248-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 55mm, length 50mm, quantity per set: 1pcs fits: NISSAN PRIMASTAR OPEL ANTARA A, CALIBRA A, CAMPO, FRONTERA A, FRONTERA A SPORT 08.87-

View part

MPBS Polyurethane suspension sleeve 5102248-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 55mm, length 50mm fits: NISSAN PRIMASTAR OPEL VIVARO A RENAULT ESPACE IV, LAGUNA II 02.01-

View part

MPBS Polyurethane suspension sleeve 5102249-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 58mm, length 55mm, quantity per set: 1pcs fits: OPEL VIVARO A RENAULT ESPACE IV, KANGOO EXPRESS, KANGOO II, LAGUNA II 02.01-

View part

MPBS Polyurethane suspension sleeve 5102249-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 58mm, length 55mm fits: RENAULT ESPACE IV, KANGOO EXPRESS, KANGOO II, LAGUNA II, TRAFIC II 03.01-

View part

MPBS Polyurethane suspension sleeve 5102253-L-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102253-P-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102253L-00/80SHA

Rear beam bushing (left), 1pcs, beam, L, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 5102253L-00/CS

Rear beam bushing (left), 1pcs, beam, L, hardness: 75 Sha,

View part

MPBS Polyurethane suspension sleeve 5102253P-00/80SHA

Rear beam bushing (right), hardness: 80 Sha, outer diameter: 78,3mm, length 73mm, quantity per set: 1pcs fits: RENAULT LAGUNA II 03.01-12.07

View part

MPBS Polyurethane suspension sleeve 5102253P-00/CS

Rear beam bushing (right), hardness: 75 Sha, outer diameter: 78,3mm, length 73mm, quantity per set: 1pcs fits: RENAULT LAGUNA II 03.01-12.07

View part

MPBS Polyurethane suspension sleeve 5102402/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102402/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102403/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102403/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 51024128-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 51024128-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102429-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102429-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102448-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 55mm, quantity per set: 1pcs fits: RENAULT LAGUNA, LAGUNA III 10.07-12.15

View part

MPBS Polyurethane suspension sleeve 5102448-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 55mm, quantity per set: 1pcs fits: RENAULT LAGUNA, LAGUNA III 10.07-12.15

View part

MPBS Polyurethane suspension sleeve 5102449-58-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 58mm, quantity per set: 1pcs fits: RENAULT LAGUNA III 10.07-12.15

View part

MPBS Polyurethane suspension sleeve 5102449-58-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 58mm, quantity per set: 1pcs fits: RENAULT LAGUNA III 10.07-12.15

View part

MPBS Polyurethane suspension sleeve 5102449-72-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 72,5mm, quantity per set: 1pcs fits: RENAULT LAGUNA, LAGUNA III, LATITUDE 10.07-

View part

MPBS Polyurethane suspension sleeve 5102449-72-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 72,5mm, quantity per set: 1pcs fits: RENAULT LAGUNA, LAGUNA III, LATITUDE 10.07-

View part

MPBS Polyurethane suspension sleeve 5102453L-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102453L-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102453P-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102453P-00/90SHA

Polyurethane bushing,

View part

MPBS Exhaust system hanger 5102651-00/60SHA

Exhaust system hanger fits: NISSAN KUBISTAR OPEL MOVANO A RENAULT KANGOO, KANGOO EXPRESS, MASTER II, MEGANE I, MEGANE I CLASSIC, MEGANE I COACH, MEGANE SCÉNIC, SCENIC I 1.0-Electric 01.96-

View part

MPBS Polyurethane suspension sleeve 5102651-00/80SHA

Muffler hanger, hardness: 80 Sha, quantity per set: 1pcs fits: NISSAN KUBISTAR OPEL MOVANO A RENAULT KANGOO, KANGOO EXPRESS, MASTER II, MEGANE I, MEGANE I CLASSIC, MEGANE I COACH, SCENIC I 01.96-

View part

MPBS Polyurethane suspension sleeve 5102651-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102653-00/80SHA

Rear beam bushing, hardness: 80 Sha, outer diameter: 72mm, quantity per set: 1pcs fits: RENAULT MEGANE I, MEGANE I CLASSIC, MEGANE I COACH 01.96-08.03

View part

MPBS Polyurethane suspension sleeve 5102653-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102671-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 30mm, quantity per set: 1pcs fits: RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, CLIO I, CLIO II, KANGOO, KANGOO EXPRESS 01.88-

View part

MPBS Polyurethane suspension sleeve 5102671-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102748-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 43mm, length 48mm, quantity per set: 1pcs fits: MERCEDES CITAN MIXTO (DOUBLE CABIN), CITAN (W415) 09.02-

View part

MPBS Polyurethane suspension sleeve 5102748-00/90SHA

Polyurethane bushing, hardness: 90 Sha, fits: MERCEDES CITAN MIXTO (DOUBLE CABIN), CITAN (W415), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W415) RENAULT KANGOO EXPRESS, KANGOO II 1.2-Electric 09.02-

View part

MPBS Polyurethane suspension sleeve 5102748-49-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102748-49/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 5102749-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 58,2mm, length 53mm, quantity per set: 1pcs fits: MERCEDES CITAN (W415) RENAULT CAPTUR I, CLIO III, CLIO IV, GRAND SCENIC II 09.02-

View part

MPBS Polyurethane suspension sleeve 5102749-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 58,2mm, length 53mm fits: MERCEDES CITAN (W415) RENAULT CAPTUR I, CLIO IV, GRAND SCENIC II, MEGANE II, SCENIC II, ZOE 09.02-

View part

MPBS Polyurethane suspension sleeve 5102753-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 67mm, quantity per set: 2pcs fits: RENAULT GRAND SCENIC III, MEGANE, MEGANE III, SCENIC III 11.08-03.17

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account