Partios Wholesale catalogue
Mpbs Distributor | Suspension & Steering
Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)
2,629 current catalogue lines
About the MPBS range
Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MPBS Polyurethane suspension sleeve 5000607A-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 60mm fits: AUDI Q7 PORSCHE CAYENNE VW TOUAREG 05.02-08.15
View partMPBS Polyurethane suspension sleeve 5000607B-00/80SHA
Front Swingarm bushing (rear) 72mm, hardness: 80 Sha, outer diameter: 72,2mm, length 60mm, quantity per set: 1pcs, fits version produced after 06.2008 fits: AUDI Q7 PORSCHE CAYENNE 05.02-12.18
View partMPBS Polyurethane suspension sleeve 5000607B-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 72,2mm, length 60mm fits: AUDI Q7 PORSCHE CAYENNE VW TOUAREG 09.02-12.18
View partMPBS Polyurethane suspension sleeve 5001166-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 40,3mm, length 40mm fits: PORSCHE PANAMERA 07.09-10.16
View partMPBS Polyurethane suspension sleeve 5001166-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 40,3mm, length 40mm fits: PORSCHE PANAMERA 07.09-10.16
View partMPBS Polyurethane suspension sleeve 5001174-00/80SHA
Polyurethane bushing, hardness: 80 Sha fits: PORSCHE PANAMERA 07.09-10.16
View partMPBS Polyurethane suspension sleeve 5001174/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5001202/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5001202/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5100801/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5100801/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5100802/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5100802/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5100804-00/80SHA
Front Swingarm bushing, hardness: 80 Sha, outer diameter: 45,6mm, length 46mm, quantity per set: 1pcs fits: NISSAN KUBISTAR RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, CLIO I, CLIO II 01.88-
View partMPBS Polyurethane suspension sleeve 5100804-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 45,6mm, length 46mm fits: NISSAN KUBISTAR RENAULT CLIO I, CLIO II, KANGOO, KANGOO EXPRESS, THALIA I, THALIA II, TWINGO II 05.90-
View partMPBS Polyurethane suspension sleeve 5100829-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5100829-00/80SHA/21
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 35,5mm, quantity per set: 1pcs fits: RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, CLIO I, CLIO II, KANGOO 07.85-
View partMPBS Polyurethane suspension sleeve 5100829-00/80SHA/23
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 35,5mm, quantity per set: 1pcs fits: RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, CLIO I, CLIO II, KANGOO 07.85-
View partMPBS Polyurethane suspension sleeve 5100829-00/80SHA/25
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 35,5mm, quantity per set: 1pcs fits: RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, CLIO I, CLIO II, KANGOO 07.85-
View partMPBS Polyurethane suspension sleeve 5100829-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5100853-00/80SHA
Polyurethane bushing, outer diameter: 44,4/45,4mm, length 73mm, quantity per set: 1pcs fits: RENAULT CLIO II, TWINGO II 09.98-
View partMPBS Polyurethane suspension sleeve 5100853-00/90SHA
Polyurethane bushing, outer diameter: 44,4/45,4mm, length 73mm, quantity per set: 1pcs fits: RENAULT CLIO II, TWINGO II 09.98-
View partMPBS Polyurethane suspension sleeve 5101048-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 36,6mm, length 55mm fits: NISSAN MICRA III, NOTE RENAULT CLIO III, MODUS 03.02-12.14
View partMPBS Polyurethane suspension sleeve 5101048-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 36,6mm, length 55mm fits: NISSAN MICRA III, NOTE RENAULT CLIO III, MODUS 03.02-12.14
View partMPBS Polyurethane suspension sleeve 5101048RS-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 33mm, length 48mm fits: RENAULT CAPTUR I, CLIO III, CLIO IV, GRAND SCENIC II, MEGANE II, SCENIC II 09.02-
View partMPBS Polyurethane suspension sleeve 5101048RS-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 33mm, length 48mm fits: RENAULT CAPTUR I, CLIO III, CLIO IV, GRAND SCENIC II, MEGANE II, SCENIC II 09.02-
View partMPBS Polyurethane suspension sleeve 5101049-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 58,7mm, length 53mm fits: NISSAN MICRA III, NOTE RENAULT CLIO III, MODUS 03.02-12.14
View partMPBS Polyurethane suspension sleeve 5101049-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 58,7mm, length 53mm fits: NISSAN MICRA III, NOTE RENAULT CLIO III, MODUS 03.02-12.14
View partMPBS Polyurethane suspension sleeve 5101049RS-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 58mm, length 53mm fits: RENAULT CAPTUR I, CLIO III, CLIO IV, GRAND SCENIC II, MEGANE II, SCENIC II 09.02-
View partMPBS Polyurethane suspension sleeve 5101049RS-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 58mm, length 53mm fits: RENAULT CAPTUR I, CLIO III, CLIO IV, GRAND SCENIC II, MEGANE II, SCENIC II 09.02-
View partMPBS Polyurethane suspension sleeve 5101053-00/80SHA
Polyurethane rear beam bushing, outer diameter: 65,3mm, length 90mm, quantity per set: 2pcs fits: DACIA DUSTER, LOGAN, SANDERO NISSAN MICRA III, NOTE, TIIDA RENAULT CAPTUR I, CLIO III 03.02-
View partMPBS Polyurethane suspension sleeve 5101053-00/90SHA
Polyurethane rear beam bushing, outer diameter: 65,3mm, length 90mm, quantity per set: 2pcs fits: DACIA DUSTER, LOGAN, SANDERO NISSAN MICRA III, NOTE, TIIDA RENAULT CAPTUR I, CLIO III 03.02-
View partMPBS Polyurethane suspension sleeve 51012132-00/80SHA
Tuleja przednich sanek (przednia), hardness: 80 Sha, outer diameter: 52mm, quantity per set: 1pcs fits: RENAULT ESPACE II, ESPACE III, LAGUNA I 01.91-10.02
View partMPBS Polyurethane suspension sleeve 51012132-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 51012133-00/80SHA
Tuleja przednich sanek (tylna), hardness: 80 Sha, outer diameter: 49mm, quantity per set: 1pcs fits: RENAULT ESPACE II, ESPACE III, LAGUNA I 01.91-10.02
View partMPBS Polyurethane suspension sleeve 51012133-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5101253-00/80SHA
Rear beam bushing, hardness: 80 Sha, outer diameter: 53mm, quantity per set: 1pcs fits: RENAULT ESPACE I, ESPACE II, ESPACE III 07.84-10.02
View partMPBS Polyurethane suspension sleeve 5101253-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5101453-00/80SHA
Polyurethane bushing, outer diameter: 67,5/70,7mm, length 80mm, quantity per set: 1pcs fits: RENAULT ESPACE IV 11.02-12.15
View partMPBS Polyurethane suspension sleeve 5101453-00/90SHA
Polyurethane bushing, outer diameter: 67,5/70,7mm, length 80mm, quantity per set: 1pcs fits: RENAULT ESPACE IV 11.02-12.15
View partMPBS Polyurethane suspension sleeve 5101453-00/CS
Polyurethane bushing, outer diameter: 67,5/70,7mm, length 80mm, quantity per set: 1pcs fits: RENAULT ESPACE IV 11.02-12.15
View partMPBS Polyurethane suspension sleeve 5102201/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5102201/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5102203/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 5102203/CS
Suspension sleeve,
View partMPBS Polyurethane suspension sleeve 51022128-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 52,4mm, quantity per set: 1pcs fits: NISSAN PRIMASTAR OPEL VIVARO A, VIVARO B RENAULT ESPACE IV, LAGUNA II, TRAFIC II 02.01-
View partMPBS Polyurethane suspension sleeve 51022128-00/90SHA
Polyurethane bushing, 1pcs, front cradle, L/R, hardness: 90 Sha, fits: NISSAN PRIMASTAR OPEL VIVARO A, VIVARO B RENAULT ESPACE IV, LAGUNA II, TRAFIC II 1.6-3.5 02.01-
View partMPBS Polyurethane suspension sleeve 5102229-00/80SHA
Polyurethane bushing,
View partBuying with Partios
Buying MPBS parts through Partios
Are these genuine MPBS parts?
- Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MPBS parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.
Do you supply MPBS parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MPBS parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MPBS order?
- It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MPBS parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account