Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 45016153-00/80SHA

Polyurethane bushing, outer diameter: 40mm, length 70mm fits: ISUZU TROOPER I, TROOPER II OPEL CAMPO, FRONTERA A, FRONTERA A SPORT 01.83-12.01

View part

MPBS Polyurethane suspension sleeve 45016153-00/90SHA

Polyurethane bushing, fits: ISUZU TROOPER I, TROOPER II OPEL CAMPO, FRONTERA A, FRONTERA A SPORT 1.9-3.2 01.83-12.01

View part

MPBS Polyurethane suspension sleeve 4501691-00/80SHA

Polyurethane bushing, fits: ISUZU TROOPER I, TROOPER II OPEL CAMPO, FRONTERA A, FRONTERA A SPORT 1.9-3.2 01.83-12.01

View part

MPBS Polyurethane suspension sleeve 4501691-00/90SHA

Polyurethane bushing, outer diameter: 30mm, length 37mm fits: ISUZU TROOPER I, TROOPER II OPEL CAMPO, FRONTERA A, FRONTERA A SPORT 01.83-12.01

View part

MPBS Polyurethane suspension sleeve 4501701/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501701/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501702/80SHA

Polyurethane bushing fits: OPEL FRONTERA B 09.98-07.04

View part

MPBS Polyurethane suspension sleeve 4501702/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501703/80SHA

Polyurethane bushing fits: OPEL FRONTERA B 09.98-07.04

View part

MPBS Polyurethane suspension sleeve 4501703/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501706-00/80SHA

Front lower Swingarm bushing, hardness: 80 Sha, outer diameter: 36,5mm, length 55mm, quantity per set: 1pcs fits: ISUZU TROOPER II, TROOPER III OPEL CAMPO, FRONTERA B 08.87-08.04

View part

MPBS Polyurethane suspension sleeve 4501706-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 36,5mm, length 55mm fits: ISUZU TROOPER II, TROOPER III OPEL CAMPO, FRONTERA B 08.87-08.04

View part

MPBS Polyurethane suspension sleeve 4501707-00/80SHA

Front lower Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 44,2mm, length 85mm, quantity per set: 1pcs fits: ISUZU TROOPER I OPEL FRONTERA B 01.83-07.04

View part

MPBS Polyurethane suspension sleeve 4501707-00/90SHA

Polyurethane bushing, hardness: 90 Sha, fits: ISUZU TROOPER I OPEL FRONTERA B 1.9-3.2 01.83-07.04

View part

MPBS Polyurethane suspension sleeve 4501708-00/80SHA

Front upper Swingarm bushing, hardness: 80 Sha, outer diameter: 38,3mm, length 45mm, quantity per set: 1pcs fits: OPEL CAMPO, FRONTERA A, FRONTERA A SPORT, FRONTERA B, MONTEREY A 08.87-07.04

View part

MPBS Polyurethane suspension sleeve 4501708-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38,3mm, length 45mm fits: OPEL CAMPO, FRONTERA A, FRONTERA A SPORT, FRONTERA B, MONTEREY A 08.87-07.04

View part

MPBS Polyurethane suspension sleeve 45017100A-00/80SHA

Rear Panhard bar bushing (axle side), hardness: 80 Sha, outer diameter: 50mm, quantity per set: 1pcs fits: OPEL FRONTERA B 09.98-07.04

View part

MPBS Polyurethane suspension sleeve 45017100A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 43mm, length 49mm fits: OPEL FRONTERA B 09.98-07.04

View part

MPBS Polyurethane suspension sleeve 45017100B-00/80SHA

Rear Panhard bar bushing (suspension side), hardness: 80 Sha, outer diameter: 45mm, quantity per set: 1pcs fits: OPEL FRONTERA B 09.98-07.04

View part

MPBS Polyurethane suspension sleeve 45017100B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, fits: OPEL FRONTERA B 2.2/2.2D/3.2 09.98-07.04

View part

MPBS Polyurethane suspension sleeve 45017121-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 30mm, quantity per set: 1pcs fits: ISUZU TROOPER III OPEL FRONTERA B 05.98-08.04

View part

MPBS Polyurethane suspension sleeve 45017121-00/90SHA

Polyurethane bushing, fits: ISUZU TROOPER III OPEL FRONTERA B 2.2-3.5 05.98-08.04

View part

MPBS Polyurethane suspension sleeve 45017146-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 45017146-00/90SHA

Polyurethane spring washer, hardness: 90 Sha, outer diameter: 147mm, length 65mm, quantity per set: 1pcs fits: OPEL FRONTERA B 09.98-07.04

View part

MPBS Polyurethane suspension sleeve 4501729-30-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501729-30-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501729-30/80SHA/16

Polyurethane stabilizer bushing, 1pcs, front / rear stabilizer, L/R, hardness: 80 Sha, fits: ISUZU TROOPER II OPEL CAMPO, FRONTERA A, FRONTERA A SPORT, FRONTERA B, MONTEREY A 2.0-3.2 08.87-07.04

View part

MPBS Polyurethane suspension sleeve 4501729-30/80SHA/18

Polyurethane stabilizer bushing, 1pcs, front / rear stabilizer, L/R, hardness: 80 Sha, fits: ISUZU TROOPER II OPEL CAMPO, FRONTERA A, FRONTERA A SPORT, FRONTERA B, MONTEREY A 2.0-3.2 08.87-07.04

View part

MPBS Polyurethane suspension sleeve 4501729-30/80SHA/21

Polyurethane stabilizer bushing, 1pcs, front / rear stabilizer, L/R, hardness: 80 Sha, fits: ISUZU TROOPER II OPEL CAMPO, FRONTERA A, FRONTERA A SPORT, FRONTERA B, MONTEREY A 2.0-3.2 08.87-07.04

View part

MPBS Polyurethane suspension sleeve 4501729-30/80SHA/25

Polyurethane stabilizer bushing, 1pcs, front / rear stabilizer, L/R, hardness: 80 Sha, fits: ISUZU TROOPER II OPEL CAMPO, FRONTERA A, FRONTERA A SPORT, FRONTERA B, MONTEREY A 2.0-3.2 08.87-07.04

View part

MPBS Polyurethane suspension sleeve 4501762-00/80SHA

Rear lower Swingarm bushing, hardness: 80 Sha, outer diameter: 54mm, length 71mm, quantity per set: 1pcs fits: ISUZU TROOPER II OPEL FRONTERA B 08.91-07.04

View part

MPBS Polyurethane suspension sleeve 4501762-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 54mm, length 71mm fits: ISUZU TROOPER II OPEL FRONTERA B 08.91-07.04

View part

MPBS Polyurethane suspension sleeve 4501770-00/80SHA

Rear upper Swingarm bushing, hardness: 80 Sha, outer diameter: 50mm, length 60mm, quantity per set: 1pcs fits: OPEL FRONTERA B 09.98-07.04

View part

MPBS Polyurethane suspension sleeve 4501770-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 50mm, length 60mm fits: OPEL FRONTERA B 09.98-07.04

View part

MPBS Polyurethane suspension sleeve 4501903-PZ/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501903-PZ/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 45019122-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 45,3mm, length 56mm fits: OPEL INSIGNIA A 07.08-03.17

View part

MPBS Polyurethane suspension sleeve 45019122-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45,3mm, length 56mm fits: OPEL INSIGNIA A 07.08-03.17

View part

MPBS Polyurethane suspension sleeve 45019123-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 39,6mm, length 62mm fits: CHEVROLET MALIBU OPEL INSIGNIA A, INSIGNIA A COUNTRY SAAB 9-5 07.08-

View part

MPBS Polyurethane suspension sleeve 45019123-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 39,6mm, length 62mm fits: CHEVROLET MALIBU OPEL INSIGNIA A, INSIGNIA A COUNTRY SAAB 9-5 07.08-

View part

MPBS Polyurethane suspension sleeve 45019123-00/CS

Polyurethane bushing, hardness: 75 Sha, outer diameter: 39,6mm, length 62mm fits: CHEVROLET MALIBU OPEL INSIGNIA A, INSIGNIA A COUNTRY SAAB 9-5 07.08-

View part

MPBS Polyurethane suspension sleeve 45019126-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 39,7mm, length 54mm fits: CHEVROLET MALIBU OPEL INSIGNIA A SAAB 9-5 07.08-

View part

MPBS Polyurethane suspension sleeve 45019126-00/90SHA

Polyurethane bushing, transverse track control arm, hardness: 90 Sha, fits: CHEVROLET MALIBU OPEL INSIGNIA A SAAB 9-5 1.4-2.8 07.08-

View part

MPBS Polyurethane suspension sleeve 45019126-48-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 48mm, length 54mm fits: OPEL INSIGNIA A 07.08-03.17

View part

MPBS Polyurethane suspension sleeve 45019126-48-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 48mm, length 54mm fits: OPEL INSIGNIA A 07.08-03.17

View part

MPBS Polyurethane suspension sleeve 45019126-48/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 48mm, quantity per set: 1pcs fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY 07.08-03.17

View part

MPBS Polyurethane suspension sleeve 45019126-48/90SHA

Polyurethane suspension sleeve, hardness: 90 Sha, outer diameter: 48mm, quantity per set: 1pcs fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY 07.08-03.17

View part

MPBS Polyurethane suspension sleeve 45019127-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 39,6mm, length 52mm fits: CHEVROLET MALIBU OPEL INSIGNIA A, INSIGNIA A COUNTRY SAAB 9-5 07.08-

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account