Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 45019127-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 39,6mm, length 52mm fits: CHEVROLET MALIBU OPEL INSIGNIA A, INSIGNIA A COUNTRY SAAB 9-5 07.08-

View part

MPBS Polyurethane suspension sleeve 45019158-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 39,7mm, length 47mm fits: CHEVROLET MALIBU OPEL INSIGNIA A SAAB 9-5 07.08-

View part

MPBS Polyurethane suspension sleeve 45019158-00/90SHA

Polyurethane bushing, transverse track control arm, hardness: 90 Sha, fits: CHEVROLET MALIBU OPEL INSIGNIA A SAAB 9-5 1.4-2.8 07.08-

View part

MPBS Polyurethane suspension sleeve 45019159-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 39,6mm, length 47mm fits: CHEVROLET MALIBU OPEL INSIGNIA A SAAB 9-5 07.08-

View part

MPBS Polyurethane suspension sleeve 45019159-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 39,6mm, length 47mm fits: CHEVROLET MALIBU OPEL INSIGNIA A SAAB 9-5 07.08-

View part

MPBS Polyurethane suspension sleeve 4501916-00/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 702mm, length 114mm, quantity per set: 1pcs fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY SAAB 9-5 07.08-03.17

View part

MPBS Polyurethane suspension sleeve 4501916-00/90SHA

Polyurethane suspension sleeve, hardness: 90 Sha, outer diameter: 702mm, length 114mm, quantity per set: 1pcs fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY SAAB 9-5 07.08-03.17

View part

MPBS Polyurethane suspension sleeve 4501935X-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501935X-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 47mm, length 50mm fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY 07.08-03.17

View part

MPBS Polyurethane suspension sleeve 4501948-00/80SHA

Front swingarm bushing (front), hardness: 80 Sha, outer diameter: 40,4mm, length 60mm, quantity per set: 1pcs fits: CHEVROLET CRUZE, ORLANDO OPEL ASTRA J, ASTRA J GTC, CASCADA, INSIGNIA A 07.08-

View part

MPBS Polyurethane suspension sleeve 4501948-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40,4mm, length 60mm fits: CHEVROLET CRUZE, ORLANDO OPEL ASTRA J, CASCADA, INSIGNIA A, INSIGNIA A COUNTRY, ZAFIRA C SAAB 9-5 07.08-

View part

MPBS Polyurethane suspension sleeve 4501948-00/CS-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501948-00/CS-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501949-00/80SHA

Front Swingarm bushings rear, hardness: 80 Sha, outer diameter: 65,8mm, length 60mm, quantity per set: 1pcs, aluminium housing not included in the set cartridge fits: CADILLAC XTS 07.08-

View part

MPBS Polyurethane suspension sleeve 4501949-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 65,8mm, length 60mm fits: CADILLAC XTS CHEVROLET CRUZE, MALIBU, ORLANDO, VOLT OPEL AMPERA, ASTRA J, INSIGNIA A, INSIGNIA A COUNTRY 07.08-

View part

MPBS Polyurethane suspension sleeve 4502568-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40mm, length 77mm, quantity per set: 1pcs fits: NISSAN INTERSTAR OPEL MOVANO A RENAULT MASTER II, TRAFIC 03.80-

View part

MPBS Polyurethane suspension sleeve 4502568-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502568-16-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40mm, length 77mm, quantity per set: 1pcs fits: NISSAN INTERSTAR OPEL MOVANO A RENAULT MASTER II, TRAFIC 03.80-

View part

MPBS Polyurethane suspension sleeve 4502568-16-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502629-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502629-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 42,5mm, quantity per set: 2pcs fits: OPEL OMEGA A, OMEGA B 09.86-07.03

View part

MPBS Polyurethane suspension sleeve 4502629-00/80SHA/23

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 42,5mm, quantity per set: 2pcs fits: OPEL OMEGA A, OMEGA B 09.86-07.03

View part

MPBS Polyurethane suspension sleeve 4502629-00/80SHA/26

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 42,5mm, quantity per set: 2pcs fits: OPEL OMEGA A, OMEGA B 09.86-07.03

View part

MPBS Polyurethane suspension sleeve 4502629-00/80SHA/27

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 42,5mm, quantity per set: 2pcs fits: OPEL OMEGA A, OMEGA B 09.86-07.03

View part

MPBS Polyurethane suspension sleeve 4502629-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502631-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 25,5mm, quantity per set: 2pcs fits: OPEL CALIBRA A, OMEGA A, OMEGA B, SENATOR B, VECTRA A, VECTRA B 09.86-07.03

View part

MPBS Polyurethane suspension sleeve 4502631-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502648-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 41mm, quantity per set: 2pcs fits: OPEL OMEGA A, OMEGA B, SENATOR B 09.86-07.03

View part

MPBS Polyurethane suspension sleeve 4502648-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502649-00/80SHA

Front Swingarm bushings rear, hardness: 80 Sha, outer diameter: 66,5mm, quantity per set: 2pcs fits: OPEL OMEGA A, SENATOR B 09.86-04.94

View part

MPBS Polyurethane suspension sleeve 4502649-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502686-00/80SHA

Rear Swingarm bushings, hardness: 80 Sha, outer diameter: 49mm, quantity per set: 4pcs fits: OPEL OMEGA A, SENATOR B 09.86-04.94

View part

MPBS Polyurethane suspension sleeve 4502686-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502701/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502701/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502702-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502702-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502721-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502721-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502722-00/80SHA

Rear Swingarm bushing (outer), hardness: 80 Sha, outer diameter: 52mm, quantity per set: 1pcs fits: OPEL OMEGA A, OMEGA B, SENATOR B 09.86-07.03

View part

MPBS Polyurethane suspension sleeve 4502722-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502748-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 68,5mm, quantity per set: 2pcs fits: OPEL OMEGA B 03.94-07.03

View part

MPBS Polyurethane suspension sleeve 4502748-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4502749-00/80SHA

Front Swingarm bushings rear, hardness: 80 Sha, outer diameter: 48,5mm, quantity per set: 2pcs fits: OPEL OMEGA B 03.94-07.03

View part

MPBS Polyurethane suspension sleeve 4502749-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4503401-00/80SHA

Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 18pcs fits: OPEL VECTRA B 09.95-07.03

View part

MPBS Polyurethane suspension sleeve 4503401/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4503401/90SHA

Polyurethane bushing,

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account