Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 45006128Z/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500648-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 35mm, length 60mm, quantity per set: 2pcs fits: CADILLAC BLS FIAT CROMA OPEL ASCONA C, ASTRA G, ASTRA G CLASSIC, ASTRA H 09.81-

View part

MPBS Polyurethane suspension sleeve 4500648-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 35mm, length 60mm fits: FIAT CROMA OPEL ASCONA C, ASTRA G, ASTRA G CLASSIC, ASTRA H, ASTRA H GTC, MERIVA B, SIGNUM, VECTRA B 09.81-03.17

View part

MPBS Polyurethane suspension sleeve 4500649-00/80SHA

Front Swingarm bushings rear, hardness: 80 Sha, outer diameter: 48mm, length 60mm, quantity per set: 2pcs fits: OPEL ASTRA G, ASTRA G CLASSIC, ASTRA H, ASTRA H CLASSIC, ASTRA H GTC 02.98-05.14

View part

MPBS Polyurethane suspension sleeve 4500649-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 48mm, length 60mm fits: OPEL ASTRA G, ASTRA G CLASSIC, ASTRA H, ASTRA H CLASSIC, ASTRA H GTC, ZAFIRA A 02.98-05.14

View part

MPBS Polyurethane suspension sleeve 4500651-00/80SHA

Polyurethane bushing, fits: ALFA ROMEO 159 CHEVROLET CRUZE CITROEN JUMPER III FIAT CROMA, DUCATO FORD GALAXY II, MONDEO IV, S-MAX NISSAN MAXIMA / MAXIMA QX IV OPEL ASTRA G 1.2-3.2 01.95-

View part

MPBS Polyurethane suspension sleeve 4500651-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500653-00/80SHA

Rear beam bushings, 2pcs, beam, L/R, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 4500653-00/90SHA

Polyurethane bushing, hardness: 90 Sha,

View part

MPBS Polyurethane suspension sleeve 4500701/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500701/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500702/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500753-00/80SHA

Polyurethane rear beam bushing, 1pcs, rear axle, L/R, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 4500753-00/90SHA

Polyurethane rear beam bushing, 1pcs, rear axle, L/R, hardness: 90 Sha,

View part

MPBS Polyurethane suspension sleeve 4500753-00/CS

Polyurethane rear beam bushing, hardness: 75 Sha, outer diameter: 70mm, length 89mm, quantity per set: 1pcs fits: OPEL ASTRA H, ASTRA H GTC, ZAFIRA B 01.04-04.15

View part

MPBS Polyurethane suspension sleeve 4500756-00/80SHA

Front engine pad (lower), hardness: 80 Sha, outer diameter: 83mm, quantity per set: 1pcs, polyurethane part without metal flange fits: OPEL ASTRA H, ASTRA H GTC, MERIVA B, ZAFIRA B 01.04-03.17

View part

MPBS Polyurethane suspension sleeve 4500756-00/90SHA

Polyurethane bushing,

View part

MPBS Rear suspension beam silent block 4500853-00/80SHA

Rear suspension beam silent block L/R

View part

MPBS Rear suspension beam silent block 4500853-00/90SHA

Rear suspension beam silent block L/R

View part

MPBS Polyurethane suspension sleeve 4501372-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501372-00/80SHA/18

Control rod bushing 18 mm, hardness: 80 Sha, outer diameter: 37mm, quantity per set: 1pcs fits: OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, CORSA B, TIGRA 03.93-12.01

View part

MPBS Polyurethane suspension sleeve 4501372-00/80SHA/24

Control rod bushing 24mm, hardness: 80 Sha, outer diameter: 37mm, quantity per set: 1pcs fits: OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, CORSA B, TIGRA 03.93-10.01

View part

MPBS Polyurethane suspension sleeve 4501372-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501372B-00/80SHA

Control rod bushing 34mm, hardness: 80 Sha, outer diameter: 49mm, quantity per set: 2pcs fits: OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, CORSA A, CORSA A TR, CORSA B 09.82-10.01

View part

MPBS Polyurethane suspension sleeve 4501372B-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501401/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501448-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 39mm, length 69,5mm, quantity per set: 2pcs fits: OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR, CORSA C, MERIVA A, TIGRA 09.00-

View part

MPBS Polyurethane suspension sleeve 4501448-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 39mm, length 69,5mm fits: OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR, CORSA C, MERIVA A, TIGRA 09.00-

View part

MPBS Polyurethane suspension sleeve 4501449-00/80SHA

Front Swingarm bushings rear, hardness: 80 Sha, outer diameter: 60mm, length 45mm, quantity per set: 2pcs fits: OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR, CORSA C, MERIVA A 09.00-

View part

MPBS Polyurethane suspension sleeve 4501449-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 45mm fits: OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR, CORSA C, MERIVA A, TIGRA 09.00-

View part

MPBS Polyurethane suspension sleeve 4501453-00/80SHA

Rear beam bushings, outer diameter: 59mm, length 65mm, quantity per set: 2pcs fits: OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR, CORSA B, CORSA C, TIGRA 03.93-

View part

MPBS Polyurethane suspension sleeve 4501453-00/90SHA

Polyurethane bushing, hardness: 90 Sha,

View part

MPBS Polyurethane suspension sleeve 4501501/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501501/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501502/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501529-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501529-00/80SHA/16

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36,5mm, quantity per set: 1pcs fits: FIAT GRANDE PUNTO OPEL CORSA D 06.05-

View part

MPBS Polyurethane suspension sleeve 4501529-00/80SHA/18

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36,5mm, quantity per set: 1pcs fits: FIAT GRANDE PUNTO OPEL CORSA D 06.05-

View part

MPBS Polyurethane suspension sleeve 4501529-00/80SHA/20

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36,5mm, quantity per set: 1pcs fits: FIAT GRANDE PUNTO OPEL CORSA D 06.05-

View part

MPBS Polyurethane suspension sleeve 4501529-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4501548-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 42,5mm, length 67,5mm, quantity per set: 2pcs fits: ABARTH GRANDE PUNTO, PUNTO ALFA ROMEO MITO CITROEN NEMO 06.05-

View part

MPBS Front track control arm silent block 4501548-00/90SHA

Front track control arm silent block (12x42,5x67,5 mm) fits: ABARTH GRANDE PUNTO, PUNTO ALFA ROMEO MITO CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE FIAT 500L 0.9-Electric 06.05-

View part

MPBS Polyurethane suspension sleeve 4501549-00/80SHA

Front swingarm bushing (rear), hardness: 80 Sha, outer diameter: 70mm, length 66mm, quantity per set: 2pcs fits: ALFA ROMEO MITO CHEVROLET AVEO CITROEN NEMO 06.05-

View part

MPBS Polyurethane suspension sleeve 4501549-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 70mm, length 66mm fits: ALFA ROMEO MITO CHEVROLET AVEO CITROEN NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE FIAT GRANDE PUNTO, LINEA 06.05-

View part

MPBS Polyurethane suspension sleeve 4501553-00/80SHA

Rear beam bushings, outer diameter: 68,2mm, length 100mm, quantity per set: 2pcs fits: OPEL ADAM, CORSA D 07.06-05.19

View part

MPBS Rear suspension beam silent block 4501553-00/90SHA

Rear suspension beam silent block (rear)

View part

MPBS Polyurethane suspension sleeve 45016146-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 45016146-00/90SHA

Polyurethane spring washer, hardness: 90 Sha, outer diameter: 132mm, quantity per set: 1pcs fits: OPEL FRONTERA A, FRONTERA A SPORT 03.92-10.98

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account