Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 4304103/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4304106-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 41mm, length 80mm, quantity per set: 1pcs fits: NISSAN PICK UP, TERRANO II, URVAN 09.85-09.07

View part

MPBS Polyurethane suspension sleeve 4304106-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 41mm, length 80mm, quantity per set: 1pcs fits: NISSAN PICK UP, TERRANO II, URVAN 09.85-09.07

View part

MPBS Polyurethane suspension sleeve 4304107-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 51,5mm, length 81,6mm, quantity per set: 1pcs fits: NISSAN NAVARA, NP300, PATHFINDER I, PICK UP, TERRANO I, TERRANO II, URVAN 04.83-

View part

MPBS Polyurethane suspension sleeve 4304107-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 51,5mm, length 81,6mm, quantity per set: 1pcs fits: NISSAN NAVARA, NP300, PATHFINDER I, PICK UP, TERRANO I, TERRANO II, URVAN 04.83-

View part

MPBS Polyurethane suspension sleeve 4304108-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 39,4mm, length 48mm, quantity per set: 1pcs fits: FORD MAVERICK NISSAN CABSTAR, PATHFINDER I, PICK UP, TERRANO I, TERRANO II, URVAN 12.80-

View part

MPBS Polyurethane suspension sleeve 4304108-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 39,4mm, length 48mm, quantity per set: 1pcs fits: FORD MAVERICK NISSAN CABSTAR, PATHFINDER I, PICK UP, TERRANO I, TERRANO II, URVAN 12.80-

View part

MPBS Polyurethane suspension sleeve 43041100A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40,4mm, length 48mm, quantity per set: 1pcs fits: NISSAN TERRANO II 10.92-09.07

View part

MPBS Polyurethane suspension sleeve 43041100B-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 43041100B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45,3mm, length 48mm, quantity per set: 1pcs fits: NISSAN TERRANO II 10.92-09.07

View part

MPBS Polyurethane suspension sleeve 43041146-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 43041146-00/90SHA

Polyurethane spring washer, hardness: 90 Sha, outer diameter: 140mm, length 60mm, quantity per set: 1pcs fits: FORD MAVERICK NISSAN TERRANO II 10.92-09.07

View part

MPBS Polyurethane suspension sleeve 4304129-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4304129-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4304130-00/80SHA

Polyurethane stabilizer bushing, 1pcs, stabilizer, L/R, rear axle, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 4304130-00/90SHA

Polyurethane stabilizer bushing, hardness: 90 Sha, outer diameter: 36,4mm, quantity per set: 1pcs fits: FORD MAVERICK NISSAN CABSTAR E, TERRANO II 02.93-09.07

View part

MPBS Polyurethane suspension sleeve 4304132-00/80SHA

Polyurethane bushing fits: NISSAN ALMERA II, PATROL GR IV, PATROL GR V, TERRANO I, TERRANO II 01.86-

View part

MPBS Polyurethane suspension sleeve 4304132-00/90SHA

Polyurethane bushing fits: NISSAN ALMERA II, PATROL GR IV, PATROL GR V, TERRANO I, TERRANO II 01.86-

View part

MPBS Polyurethane suspension sleeve 4304162-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 50,7mm, length 60mm, quantity per set: 1pcs fits: INFINITI QX4 NISSAN PATHFINDER II, PATROL GR IV, PATROL GR V, TERRANO I, TERRANO II 10.86-

View part

MPBS Polyurethane suspension sleeve 4304162-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 50,7mm, length 60mm, quantity per set: 1pcs fits: INFINITI QX4 NISSAN PATHFINDER II, PATROL GR IV, PATROL GR V, TERRANO I, TERRANO II 10.86-

View part

MPBS Polyurethane suspension sleeve 4304806-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 45,5mm, length 56,5mm fits: NISSAN CABSTAR 09.06-12.13

View part

MPBS Polyurethane suspension sleeve 4304806-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45,5mm, length 56,5mm fits: NISSAN CABSTAR 09.06-12.13

View part

MPBS Polyurethane suspension sleeve 4304807-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40,3mm, length 70mm fits: NISSAN CABSTAR 09.06-12.13

View part

MPBS Polyurethane suspension sleeve 4304807-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40,3mm, length 70mm fits: NISSAN CABSTAR 09.06-12.13

View part

MPBS Polyurethane suspension sleeve 4500501/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500501/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500529-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500529-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 2pcs fits: OPEL ASTRA F, ASTRA F CLASSIC, CALIBRA A, VECTRA A 04.88-01.05

View part

MPBS Polyurethane suspension sleeve 4500529-00/80SHA/23

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 2pcs fits: OPEL ASTRA F, ASTRA F CLASSIC, CALIBRA A, VECTRA A 04.88-01.05

View part

MPBS Polyurethane suspension sleeve 4500529-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500530-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 52mm, quantity per set: 2pcs fits: OPEL ASTRA F, ASTRA F CLASSIC, KADETT E, KADETT E COMBO 08.84-01.05

View part

MPBS Polyurethane suspension sleeve 4500530-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500531-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 44,5mm, quantity per set: 2pcs fits: OPEL ASTRA F, ASTRA F CLASSIC, CALIBRA A, VECTRA A 04.88-01.05

View part

MPBS Polyurethane suspension sleeve 4500531-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500532-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 29mm, quantity per set: 4pcs fits: OPEL ASTRA F 09.91-09.98

View part

MPBS Polyurethane suspension sleeve 4500532-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500548-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 50,5mm, quantity per set: 2pcs fits: OPEL ASTRA F, ASTRA F CLASSIC, CALIBRA A, VECTRA A 04.88-01.05

View part

MPBS Polyurethane suspension sleeve 4500548-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500549-00/80SHA

Front Swingarm bushings rear, hardness: 80 Sha, outer diameter: 67mm, length 56mm, quantity per set: 2pcs fits: OPEL ASTRA F, ASTRA F CLASSIC, CALIBRA A, VECTRA A 04.88-01.05

View part

MPBS Polyurethane suspension sleeve 4500549-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 67mm, length 56mm fits: OPEL ASTRA F, ASTRA F CLASSIC, CALIBRA A, VECTRA A 04.88-01.05

View part

MPBS Polyurethane suspension sleeve 4500553-00/80SHA

Rear beam bushings, outer diameter: 59mm, length 75mm, quantity per set: 2pcs fits: DAEWOO CIELO, ESPERO OPEL ASCONA C, ASTRA F, ASTRA F CLASSIC, KADETT E 09.81-01.05

View part

MPBS Polyurethane suspension sleeve 4500553-00/90SHA

Polyurethane bushing, outer diameter: 59mm, length 75mm fits: DAEWOO CIELO, ESPERO OPEL ASCONA C, ASTRA F, ASTRA F CLASSIC, KADETT E 09.81-01.05

View part

MPBS Polyurethane suspension sleeve 4500601/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500601/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4500602/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 45006128-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: OPEL ASTRA G, ASTRA G CLASSIC, ASTRA H, ASTRA H CLASSIC, ASTRA H GTC, ZAFIRA A, ZAFIRA B 02.98-04.15

View part

MPBS Polyurethane suspension sleeve 45006128-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: OPEL ASTRA G, ASTRA G CLASSIC, ASTRA H, ASTRA H CLASSIC, ASTRA H GTC, ZAFIRA A, ZAFIRA B 02.98-04.15

View part

MPBS Polyurethane suspension sleeve 45006128Z/80SHA

Polyurethane bushing,

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account