Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 4302630-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302630-00/80SHA/15

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40,5mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV 09.88-

View part

MPBS Polyurethane suspension sleeve 4302630-00/80SHA/17

Polyurethane stabilizer bushing, 1pcs, rear stabilizer, L/R, bottom, hardness: 80 Sha, fits: NISSAN PATROL GR IV 2.8D-4.2D 01.86-02.98

View part

MPBS Polyurethane suspension sleeve 4302630-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302649-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 38mm, length 37mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV, PATROL GR V 01.86-

View part

MPBS Polyurethane suspension sleeve 4302649-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38mm, length 37mm fits: NISSAN PATROL GR IV, PATROL GR V 01.86-

View part

MPBS Polyurethane suspension sleeve 4302663-00/80SHA

Lower swingarm separator, hardness: 80 Sha, outer diameter: 65,5mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV, PATROL GR V 09.88-

View part

MPBS Polyurethane suspension sleeve 4302663-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302664-00/80SHA

Acentric front Swingarm bushing (frame-mounted), hardness: 80 Sha, outer diameter: 60mm, length 50mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV, PATROL GR V 01.86-

View part

MPBS Polyurethane suspension sleeve 4302664-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 50mm fits: NISSAN PATROL GR IV, PATROL GR V 01.86-

View part

MPBS Polyurethane suspension sleeve 4302670-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302670-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302670/62-00/80SHA

Rear lower/upper Swingarm bushing, hardness: 80 Sha, outer diameter: 50,8mm, length 60mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV, PATROL GR V 01.86-

View part

MPBS Polyurethane suspension sleeve 4302699-00/80SHA

Front/rear Panhard bushing (for axle) 26 mm, hardness: 80 Sha, outer diameter: 55mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV, PATROL GR V 09.88-

View part

MPBS Polyurethane suspension sleeve 4302699-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 43032128A-00/80SHA

Polyurethane bushing fits: NISSAN JUKE, QASHQAI I, X-TRAIL II, X-TRAIL III RENAULT KOLEOS I 11.06-

View part

MPBS Polyurethane suspension sleeve 43032128A-00/90SHA

Polyurethane bushing, fits: NISSAN JUKE, QASHQAI I, X-TRAIL II, X-TRAIL III RENAULT KOLEOS I 1.2-2.5 11.06-

View part

MPBS Polyurethane suspension sleeve 43032128ABC/80SHA

Polyurethane bushing fits: NISSAN JUKE, QASHQAI I, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KOLEOS I 11.06-

View part

MPBS Polyurethane suspension sleeve 43032128ABC/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 43032128B-00/80SHA

Polyurethane bushing fits: NISSAN JUKE, QASHQAI I, X-TRAIL II, X-TRAIL III RENAULT KOLEOS I 11.06-

View part

MPBS Polyurethane suspension sleeve 43032128B-00/90SHA

Polyurethane bushing fits: NISSAN JUKE, QASHQAI I, X-TRAIL II, X-TRAIL III RENAULT KOLEOS I 11.06-

View part

MPBS Polyurethane suspension sleeve 43032128C-00/80SHA

Polyurethane bushing, fits: NISSAN JUKE, QASHQAI I, X-TRAIL II, X-TRAIL III RENAULT KOLEOS I 1.2-2.5 11.06-

View part

MPBS Polyurethane suspension sleeve 43032128C-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4303248-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 32,4mm, length 145mm fits: NISSAN QASHQAI I, X-TRAIL, X-TRAIL II RENAULT KOLEOS I 11.06-

View part

MPBS Polyurethane suspension sleeve 4303248-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 32,4mm, length 145mm fits: NISSAN QASHQAI I, X-TRAIL, X-TRAIL II RENAULT KOLEOS I 11.06-

View part

MPBS Polyurethane suspension sleeve 4303249-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 58,3mm, length 53mm, quantity per set: 1pcs fits: NISSAN QASHQAI I, ROGUE, X-TRAIL, X-TRAIL II RENAULT KOLEOS I 11.06-

View part

MPBS Polyurethane suspension sleeve 4303249-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 58,3mm, length 53mm, quantity per set: 1pcs fits: NISSAN QASHQAI I, ROGUE, X-TRAIL, X-TRAIL II RENAULT KOLEOS I 11.06-

View part

MPBS Polyurethane suspension sleeve 4303258-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 37,2mm, length 50mm fits: NISSAN QASHQAI +2, QASHQAI I, QASHQAI II, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KADJAR, KOLEOS I 11.06-

View part

MPBS Polyurethane suspension sleeve 4303258-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 37,2mm, length 50mm fits: NISSAN QASHQAI I, QASHQAI II, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KADJAR, KOLEOS I, KOLEOS II 11.06-

View part

MPBS Polyurethane suspension sleeve 4303261-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 37,8mm, length 50mm fits: NISSAN QASHQAI I, QASHQAI II, X-TRAIL II, X-TRAIL III 11.06-

View part

MPBS Polyurethane suspension sleeve 4303261-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 37,8mm, length 50mm fits: NISSAN QASHQAI I, QASHQAI II, X-TRAIL II, X-TRAIL III 11.06-

View part

MPBS Polyurethane suspension sleeve 4304029-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4304029-00/80SHA/18

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 42mm, quantity per set: 1pcs fits: NISSAN 100NX, 200SX, ALMERA I, MICRA II, SUNNY III 07.88-02.03

View part

MPBS Polyurethane suspension sleeve 4304029-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 42mm, quantity per set: 1pcs fits: NISSAN 100NX, 200SX, ALMERA I, MICRA II, SUNNY III 07.88-02.03

View part

MPBS Polyurethane suspension sleeve 4304029-00/80SHA/26

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 42mm, quantity per set: 1pcs fits: NISSAN 100NX, 200SX, ALMERA I, MICRA II, SUNNY III 07.88-02.03

View part

MPBS Polyurethane suspension sleeve 4304029-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4304030-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4304030-00/80SHA/16

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 31mm, quantity per set: 1pcs fits: NISSAN SUNNY III 10.90-05.95

View part

MPBS Polyurethane suspension sleeve 4304030-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4304048-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 36mm, quantity per set: 1pcs fits: NISSAN 100NX, ALMERA I, SUNNY III 03.90-07.00

View part

MPBS Polyurethane suspension sleeve 4304048-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4304049-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 57mm, quantity per set: 1pcs fits: NISSAN 100NX, ALMERA I, SUNNY III 03.90-07.00

View part

MPBS Polyurethane suspension sleeve 4304049-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4304101-00/80SHA

Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 30pcs, when ordering one must agree on diameter of stabilizer bar fits: FORD MAVERICK NISSAN TERRANO II 10.92-09.07

View part

MPBS Polyurethane suspension sleeve 4304101/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4304102/80SHA

Polyurethane bushing, hardness: 80 Sha fits: FORD MAVERICK NISSAN TERRANO II 10.92-09.07

View part

MPBS Polyurethane suspension sleeve 4304102/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4304103/80SHA

Polyurethane bushing, hardness: 80 Sha fits: FORD MAVERICK NISSAN TERRANO II 10.92-09.07

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account