Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 4300253-00/90SHA

Polyurethane bushing fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-02.08

View part

MPBS Polyurethane suspension sleeve 4300253K/80SHA

Polyurethane bushing fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-02.08

View part

MPBS Polyurethane suspension sleeve 4300253K/90SHA

Polyurethane bushing fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-02.08

View part

MPBS Polyurethane suspension sleeve 4300266-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4300266-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 30,6mm, length 40mm fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-12.03

View part

MPBS Polyurethane suspension sleeve 4300274AB/80SHA

Polyurethane bushing, hardness: 80 Sha fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-02.08

View part

MPBS Polyurethane suspension sleeve 4300274AB/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4300279B-00/80SHA

Polyurethane bushing fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-12.03

View part

MPBS Polyurethane suspension sleeve 4300279B-00/90SHA

Polyurethane bushing fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-12.03

View part

MPBS Suspension sleeve 4300279DYF/80SHA

Differential sleeve, 1pcs, fitting position: rear fits: NISSAN 200SX, 240SX, SILVIA, SKYLINE 2.0 (HR34)/2.0 i 16V/2.0 i 16V Turbo/2.0 Turbo/2.4/2.5 (ER33)/2000/2000 Turbo 08.88-12.03

View part

MPBS Polyurethane suspension sleeve 4300283-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4300283-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 31mm, length 50mm fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-12.03

View part

MPBS Polyurethane suspension sleeve 4300307-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 60mm, length 80mm fits: INFINITI G NISSAN 350Z 09.02-

View part

MPBS Polyurethane suspension sleeve 4300307-00/90SHA

Polyurethane bushing, transverse track control arm, hardness: 90 Sha, fits: INFINITI G NISSAN 350Z 3.5 09.02-

View part

MPBS Polyurethane suspension sleeve 43003123-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 38mm, length 50mm fits: NISSAN 350Z 09.02-12.09

View part

MPBS Polyurethane suspension sleeve 43003123-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38mm, length 50mm fits: NISSAN 350Z 09.02-12.09

View part

MPBS Polyurethane suspension sleeve 4301353-00/80SHA

Polyurethane bushing fits: NISSAN JUKE 06.10-12.19

View part

MPBS Polyurethane suspension sleeve 4301353-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302048-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 50mm, length 49mm, quantity per set: 1pcs fits: NISSAN ALTIMA, JUKE, MURANO II, NV200, NV200 / EVALIA, TEANA II, TIIDA 09.06-

View part

MPBS Polyurethane suspension sleeve 4302048-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 50mm, length 49mm, quantity per set: 1pcs fits: NISSAN ALTIMA, JUKE, MURANO II, NV200, NV200 / EVALIA, TEANA II, TIIDA 09.06-

View part

MPBS Polyurethane suspension sleeve 4302049-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 72mm, length 75mm, quantity per set: 1pcs fits: NISSAN ALTIMA, MURANO II, TEANA II, TEANA III 10.06-

View part

MPBS Polyurethane suspension sleeve 4302049-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 72mm, length 75mm, quantity per set: 1pcs fits: NISSAN ALTIMA, MURANO II, TEANA II, TEANA III 10.06-

View part

MPBS Polyurethane suspension sleeve 4302191-00/80SHA

Rear leaf spring bushings (rear), hardness: 80 Sha, outer diameter: 32,7mm, length 37mm, quantity per set: 1pcs fits: NISSAN NAVARA NP300, PATROL III/1, PATROL III/2, PICK UP 11.79-

View part

MPBS Polyurethane suspension sleeve 4302191-00/90SHA

Polyurethane bushing, outer diameter: 32,7mm, length 37mm fits: NISSAN NAVARA NP300, PATROL III/1, PATROL III/2, PICK UP 11.79-

View part

MPBS Polyurethane suspension sleeve 43025146-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 43025146-00/90SHA

Polyurethane spring washer, hardness: 90 Sha, outer diameter: 175mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV, PATROL GR V 09.88-

View part

MPBS Polyurethane suspension sleeve 4302601A 80SHA

Complete suspension set (acentric) - MPBS: 4302601A, hardness: 80 Sha, quantity per set: 24pcs fits: NISSAN PATROL GR IV, PATROL GR V 09.88-

View part

MPBS Polyurethane suspension sleeve 4302601A/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302601A/90SHA

Polyurethane bushing, hardness: 90 Sha fits: NISSAN PATROL GR IV, PATROL GR V 01.86-

View part

MPBS Polyurethane suspension sleeve 4302601C 80SHA

Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 24pcs fits: NISSAN PATROL GR IV, PATROL GR V 09.88-

View part

MPBS Polyurethane suspension sleeve 4302601C/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302601C/90SHA

Polyurethane bushing, hardness: 90 Sha fits: NISSAN PATROL GR IV, PATROL GR V, TERRANO II 01.86-

View part

MPBS Polyurethane suspension sleeve 4302602A/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302602C/80SHA

Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 12pcs fits: NISSAN PATROL GR IV, PATROL GR V 09.88-

View part

MPBS Polyurethane suspension sleeve 4302602C/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302603/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302604-00/80SHA

Acentric front Swingarm bushing (frame-mounted), hardness: 80 Sha, outer diameter: 60mm, length 50mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV, PATROL GR V 01.86-

View part

MPBS Polyurethane suspension sleeve 4302604-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 50mm fits: NISSAN PATROL GR IV, PATROL GR V 01.86-

View part

MPBS Polyurethane suspension sleeve 43026100-00/80SHA

Front/rear Panhard bushing (for body) 14mm, hardness: 80 Sha, outer diameter: 45mm, length 50mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV, PATROL GR V 01.86-

View part

MPBS Polyurethane suspension sleeve 43026100-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45mm, length 50mm fits: NISSAN PATROL GR IV, PATROL GR V 01.86-

View part

MPBS Polyurethane suspension sleeve 43026101-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 43026101-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 43026101-120-00/90SH

Conical buffer (front), 1pcs, front, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 4302629-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4302629-00/80SHA/15

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 35mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV 09.88-

View part

MPBS Polyurethane suspension sleeve 4302629-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 35mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV 09.88-

View part

MPBS Polyurethane suspension sleeve 4302629-00/80SHA/24

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 35mm, quantity per set: 1pcs fits: NISSAN PATROL GR IV 09.88-

View part

MPBS Polyurethane suspension sleeve 4302629-00/90SHA

Polyurethane bushing,

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account