Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 3804630B-00/80SHA

Polyurethane stabilizer bushing, 1pcs, rear stabilizer, L/R, bottom, hardness: 80 Sha, fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3,5-T (B906), SPRINTER 3-T (B903) 1.8-Electric 04.77-09.20

View part

MPBS Polyurethane suspension sleeve 3804630B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3,5-T (B906), SPRINTER 3-T (B903), SPRINTER 3-T (B906), SPRINTER 4-T (B904) 1.8-Electric 04.77-09.20

View part

MPBS Polyurethane suspension sleeve 3804630C-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3804630C-00/80SHA/26

Polyurethane stabilizer bushing, 1pcs, rear axle, L/R, inside, hardness: 80 Sha, fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3-T (B903), SPRINTER 4-T (B904) 2.1D-Electric 01.95-05.06

View part

MPBS Polyurethane suspension sleeve 3804630C-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3804630C-00/90SHA/26

Polyurethane stabilizer bushing, 1pcs, rear axle, L/R, inside, hardness: 90 Sha, fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3-T (B903), SPRINTER 4-T (B904) 2.1D-Electric 01.95-05.06

View part

MPBS Polyurethane suspension sleeve 3807352-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 52mm, length 75mm, quantity per set: 1pcs fits: MERCEDES SPRINTER 3,5-T (B906), SPRINTER 3,5-T (B907), SPRINTER 3,5-T (B907, B910) 04.06-12.21

View part

MPBS Polyurethane suspension sleeve 3807352-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 52mm, length 75mm, quantity per set: 1pcs fits: MERCEDES SPRINTER 3,5-T (B906), SPRINTER 3,5-T (B907), SPRINTER 3,5-T (B907, B910) 04.06-12.21

View part

MPBS Polyurethane suspension sleeve 38074121-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 30mm, quantity per set: 1pcs fits: MERCEDES G (W460), G (W461), G (W463), T2/L, T2/LN1, ATEGO, ATEGO 2, ATEGO 3, LK/LN2, LP 09.63-

View part

MPBS Polyurethane suspension sleeve 38074121-00/90SHA

Polyurethane stabilizer bushing, hardness: 90 Sha, outer diameter: 30mm, quantity per set: 1pcs fits: MERCEDES G (W460), G (W461), G (W463), T2/L, T2/LN1, ATEGO, ATEGO 2, ATEGO 3, LK/LN2, LP 09.63-

View part

MPBS Polyurethane suspension sleeve 3807429-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 62mm, length 47mm, quantity per set: 1pcs fits: MERCEDES ATEGO, ATEGO 2, ATEGO 3, TOURINO (O 510) 01.98-

View part

MPBS Polyurethane suspension sleeve 3807429-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3807430-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 1pcs fits: MERCEDES VARIO, VARIO (B667, B670, B668), VARIO (B670, B668, B667), ATEGO, ATEGO 2 01.70-

View part

MPBS Polyurethane suspension sleeve 3807430-00/90SHA

Polyurethane bushing fits: MERCEDES ATEGO, ATEGO 2, ATEGO 3, TOURINO (O 510) 01.98-

View part

MPBS Polyurethane suspension sleeve 3807431-00/80SHA

Polyurethane bushing fits: MERCEDES ATEGO, ATEGO 2 01.98-

View part

MPBS Polyurethane suspension sleeve 3807431-00/90SHA

Polyurethane bushing fits: MERCEDES ATEGO, ATEGO 2 01.98-

View part

MPBS Polyurethane suspension sleeve 4100825-00/80SHA

Rear transverse Swingarm bushing, hardness: 80 Sha, outer diameter: 33mm, length 40mm, quantity per set: 1pcs fits: MINI (R50, R53), (R52), (R56), (R57), (R58), (R59) 06.01-10.16

View part

MPBS Polyurethane suspension sleeve 4100825-00/90SHA

Rear transverse Swingarm bushing, hardness: 90 Sha, outer diameter: 33mm, length 40mm, quantity per set: 1pcs fits: MINI (R50, R53), (R52), (R56), (R57), (R58), (R59) 06.01-10.16

View part

MPBS Polyurethane suspension sleeve 4100830-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4100830-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4201179-00/80SHA

Rear differential gear bushing, hardness: 80 Sha, outer diameter: 55,5mm, quantity per set: 1pcs, 4WD vehicles fits: MITSUBISHI ECLIPSE II 12.95-04.99

View part

MPBS Polyurethane suspension sleeve 4201179-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 42018169-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 27,8mm, quantity per set: 1pcs fits: MITSUBISHI L 300 / DELICA II, L 300 III, L200, L200 / TRITON, PAJERO I, PAJERO II 05.80-

View part

MPBS Polyurethane suspension sleeve 42018169-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 27,8mm, quantity per set: 1pcs fits: MITSUBISHI L 300 / DELICA II, L 300 III, L200, L200 / TRITON, PAJERO I, PAJERO II 05.80-

View part

MPBS Polyurethane suspension sleeve 42018170-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 27,8mm, quantity per set: 1pcs fits: MITSUBISHI L 300 / DELICA II, L 300 III, L200, L200 / TRITON, PAJERO I, PAJERO II 05.80-

View part

MPBS Polyurethane suspension sleeve 42018170-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 27,8mm, quantity per set: 1pcs fits: MITSUBISHI L 300 / DELICA II, L 300 III, L200, L200 / TRITON, PAJERO I, PAJERO II 05.80-

View part

MPBS Polyurethane suspension sleeve 4202829-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4202829-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4202879-00/80SHA

Polyurethane bushing, hardness: 80 Sha, quantity per set: 1pcs fits: MITSUBISHI OUTLANDER I 03.01-09.07

View part

MPBS Polyurethane suspension sleeve 4202879-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4203106-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 49mm, quantity per set: 1pcs fits: MITSUBISHI PAJERO III 04.00-01.07

View part

MPBS Polyurethane suspension sleeve 4203106-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 49mm, quantity per set: 1pcs fits: MITSUBISHI PAJERO III 04.00-01.07

View part

MPBS Polyurethane suspension sleeve 4203201-PZ/80SHA

Polyurethane suspension bushings set, hardness: 80 Sha fits: MITSUBISHI PAJERO III, PAJERO IV 04.00-

View part

MPBS Polyurethane suspension sleeve 4300201-PZ/80SHA

Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 38pcs fits: NISSAN 200SX, 240SX, SILVIA, SKYLINE 08.88-12.03

View part

MPBS Polyurethane suspension sleeve 4300203-PZ/80SHA

Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 30pcs fits: NISSAN 200SX, 240SX, SILVIA, SKYLINE 08.88-12.03

View part

MPBS Polyurethane suspension sleeve 43002121AB-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 43002121AB-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4300213-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 38/40mm, length 63mm fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-12.03

View part

MPBS Polyurethane suspension sleeve 4300213-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38/40mm, length 63mm fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-12.03

View part

MPBS Polyurethane suspension sleeve 4300222-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4300222-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 32mm, length 50mm fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-12.03

View part

MPBS Polyurethane suspension sleeve 4300229-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4300229-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4300230-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4300230-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4300233AB-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4300233AB-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 4300253-00/80SHA

Polyurethane bushing fits: NISSAN 200SX, SILVIA, SKYLINE 07.93-02.08

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account