Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 3703930-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3703930-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3703935-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 30mm, length 47mm fits: MAZDA MX-5 III, RX-8 10.03-12.14

View part

MPBS Polyurethane suspension sleeve 3703935-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 30mm, length 47mm fits: MAZDA MX-5 III, RX-8 10.03-12.14

View part

MPBS Polyurethane suspension sleeve 3703944B-00/80SHA

Polyurethane bushing fits: MAZDA MX-5 III, RX-8 10.03-12.14

View part

MPBS Polyurethane suspension sleeve 3703944B-00/90SHA

Polyurethane bushing fits: MAZDA MX-5 III, RX-8 10.03-12.14

View part

MPBS Polyurethane suspension sleeve 38010123-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 45mm, length 78mm fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), CLA (C117), CLA SHOOTING BRAKE (X117), GLA (X156) 11.11-

View part

MPBS Polyurethane suspension sleeve 38010123-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45mm, length 78mm fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), CLA (C117), CLA SHOOTING BRAKE (X117), GLA (X156) 11.11-

View part

MPBS Polyurethane suspension sleeve 3801016-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 82mm, length 141mm fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), CLA (C117), CLA SHOOTING BRAKE (X117), GLA (X156) 11.11-

View part

MPBS Polyurethane suspension sleeve 3801016-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 82mm, length 141mm fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), CLA (C117), CLA SHOOTING BRAKE (X117), GLA (X156) 11.11-

View part

MPBS Polyurethane suspension sleeve 3801048-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 46,3mm, length 39mm fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), CLA (C117), CLA SHOOTING BRAKE (X117), GLA (X156) 11.11-

View part

MPBS Polyurethane suspension sleeve 3801048-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 46,3mm, length 39mm fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), CLA (C117), CLA SHOOTING BRAKE (X117), GLA (X156) 11.11-

View part

MPBS Rear wishbone silent block 3801058-00/80SHA

Rear track control arm silent block (rear) fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), CLA (C117), CLA SHOOTING BRAKE (X117), GLA (X156) INFINITI Q30, QX30 1.5D-Electric 11.11-

View part

MPBS Rear wishbone silent block 3801058-00/90SHA

Rear track control arm silent block (rear) fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), CLA (C117), CLA SHOOTING BRAKE (X117), GLA (X156) INFINITI Q30, QX30 1.5D-Electric 11.11-

View part

MPBS Polyurethane suspension sleeve 3801261-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 47,6/48,5mm, length 99,5mm fits: MERCEDES C T-MODEL (S202), C (W202), CLK (A208), CLK (C208), E T-MODEL (S210), E (W210) 03.93-04.04

View part

MPBS Polyurethane suspension sleeve 3801261-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 47,6/48,5mm, length 99,5mm fits: MERCEDES C T-MODEL (S202), C (W202), CLK (A208), CLK (C208), E T-MODEL (S210), E (W210) 03.93-04.04

View part

MPBS Polyurethane suspension sleeve 3801348-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 70mm, length 80mm fits: MERCEDES C (CL203), C T-MODEL (S203), C T-MODEL (S204), C (W203), C (W204), CLC (CL203), CLS (C219) 05.00-12.16

View part

MPBS Polyurethane suspension sleeve 3801348-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 70mm, length 80mm fits: MERCEDES C (CL203), C T-MODEL (S203), C T-MODEL (S204), C (W203), C (W204), CLC (CL203), CLS (C219) 05.00-12.16

View part

MPBS Polyurethane suspension sleeve 3801348/CS

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3801349-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 70mm, length 80mm fits: MERCEDES C (CL203), C T-MODEL (S203), C (W203), CLC (CL203), CLK (A209), CLK (C209), SLK (R171) 05.00-12.11

View part

MPBS Polyurethane suspension sleeve 3801349-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 70mm, length 80mm fits: MERCEDES C (CL203), C T-MODEL (S203), C (W203), CLC (CL203), CLK (A209), CLK (C209), SLK (R171) 05.00-12.11

View part

MPBS Polyurethane suspension sleeve 3801349/CS

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3802206-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 60,3mm, length 97mm fits: MERCEDES E T-MODEL (S210), E T-MODEL (S211), E (W210), E (W211), S (W220, V220) 06.95-07.09

View part

MPBS Polyurethane suspension sleeve 3802206-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60,3mm, length 97mm fits: MERCEDES E T-MODEL (S210), E T-MODEL (S211), E (W210), E (W211), S (W220, V220) 06.95-07.09

View part

MPBS Polyurethane suspension sleeve 3802207-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 50mm, length 47mm fits: MERCEDES E T-MODEL (S210), E (VF210), E (W210) 06.95-03.03

View part

MPBS Polyurethane suspension sleeve 3802207-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 50mm, length 47mm fits: MERCEDES E T-MODEL (S210), E (VF210), E (W210) 06.95-03.03

View part

MPBS Polyurethane suspension sleeve 3802229-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3802229-00/80SHA/24

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: MERCEDES E (W210), S (W140) 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 3802229-00/80SHA/25

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: MERCEDES E (W210), S (W140) 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 3802229-00/80SHA/26

Polyurethane stabilizer bushing, 1pcs, front, hardness: 80 Sha, fits: MERCEDES E (W210), S (C140), S (W140) 2.0-6.0 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 3802229-00/80SHA/27

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: MERCEDES E (W210), S (W140) 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 3802229-00/80SHA/28

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: MERCEDES E (W210), S (W140) 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 3802229-00/80SHA/30

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: MERCEDES E (W210), S (W140) 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 3802229-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3802229-00/90SHA/24

Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 1pcs fits: MERCEDES E (W210), S (W140) 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 3802229-00/90SHA/25

Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 1pcs fits: MERCEDES E (W210), S (W140) 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 3802229-00/90SHA/26

Polyurethane stabilizer bushing, 1pcs, front, hardness: 90 Sha, fits: MERCEDES E (W210), S (C140), S (W140) 2.0-6.0 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 3802229-00/90SHA/27

Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 1pcs fits: MERCEDES E (W210), S (W140) 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 3802229-00/90SHA/28

Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 1pcs fits: MERCEDES E (W210), S (W140) 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 3802229-00/90SHA/30

Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 1pcs fits: MERCEDES E (W210), S (W140) 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 38038186-00/80SHA

Polyurethane bushing, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 38038186-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 38038187-00/80SHA

Polyurethane bushing, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 38038187-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3803896/80SHA

Polyurethane bushing, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 3803896/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3804609-00/80SHA

Front swingarm bushing, hardness: 80 Sha, outer diameter: 58mm, quantity per set: 1pcs fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3-T (B903), SPRINTER 4-T (B904) VW LT 28-35 II 01.95-07.06

View part

MPBS Polyurethane suspension sleeve 3804629-00/80SHA/20

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 52,5mm, quantity per set: 1pcs fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3-T (B903), SPRINTER 4-T (B904) 01.95-05.06

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account