Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 3200103/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3200103/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3200104-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 51,2mm, length 53mm fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 3200104-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 51,2mm, length 53mm fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 32001103-00/80SHA

Polyurethane bushing fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 32001103-00/90SHA

Polyurethane bushing fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 32001117-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 32001117-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3200129-30-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3200129-30-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3200145-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 35mm, length 62mm fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 3200145-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 35mm, length 62mm fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 3200149-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 38,6/53,5mm, length 39mm fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 3200149-00/90SHA

Polyurethane bushing, trailing arm, hardness: 90 Sha, fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 2.0-4.3 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 3200162-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 75mm, length 65mm fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 3200162-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 75mm, length 65mm fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 3200183-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 41,7mm, length 51mm fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 3200183-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 41,7mm, length 51mm fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 3200184-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3200184-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3200199-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3200199-00/90SHA

Polyurethane bushing, hardness: 90 Sha, length 45mm fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16

View part

MPBS Polyurethane suspension sleeve 3200207-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 71,3mm, quantity per set: 1pcs fits: LAND ROVER DISCOVERY III, DISCOVERY IV 07.04-12.18

View part

MPBS Polyurethane suspension sleeve 3200207-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 71,3mm, quantity per set: 1pcs fits: LAND ROVER DISCOVERY III, DISCOVERY IV 07.04-12.18

View part

MPBS Polyurethane suspension sleeve 3200379-00/80SHA

Rear axle bushing, hardness: 80 Sha, outer diameter: 59,5mm, length 62mm, quantity per set: 1pcs fits: LAND ROVER FREELANDER I 02.98-10.06

View part

MPBS Polyurethane suspension sleeve 3200379-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 59,5mm, length 62mm fits: LAND ROVER FREELANDER I 02.98-10.06

View part

MPBS Polyurethane suspension sleeve 3300506-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 45,4mm, length 55mm, quantity per set: 1pcs fits: LEXUS GS, SC 08.97-11.11

View part

MPBS Polyurethane suspension sleeve 3300506-00/90SHA

Polyurethane bushing, transverse track control arm, hardness: 90 Sha, fits: LEXUS GS, SC 3.0/4.0/4.3 08.97-07.10

View part

MPBS Polyurethane suspension sleeve 3300507-00/80SHA

Polyurethane bushing fits: LEXUS GS 04.05-11.11

View part

MPBS Polyurethane suspension sleeve 3300507-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3300507-60/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 60,5mm, length 65mm, quantity per set: 1pcs fits: LEXUS GS 08.97-12.04

View part

MPBS Polyurethane suspension sleeve 3300507-65/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 65mm, length 65mm, quantity per set: 1pcs fits: LEXUS GS 08.97-11.11

View part

MPBS Polyurethane suspension sleeve 3300508-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 41,2mm, length 49mm, quantity per set: 1pcs fits: LEXUS GS, SC 08.97-07.10

View part

MPBS Polyurethane suspension sleeve 3300508-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 41,2mm, length 49mm, quantity per set: 1pcs fits: LEXUS GS, SC 08.97-07.10

View part

MPBS Polyurethane suspension sleeve 3301229-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3301229-00/80SHA/26

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 44mm, quantity per set: 1pcs fits: LEXUS IS I 04.99-07.05

View part

MPBS Polyurethane suspension sleeve 3301229-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3301248-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 42,2mm, length 55mm, quantity per set: 1pcs fits: LEXUS IS I 04.99-07.05

View part

MPBS Polyurethane suspension sleeve 3301248-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 42,2mm, length 55mm, quantity per set: 1pcs fits: LEXUS IS I 04.99-07.05

View part

MPBS Polyurethane suspension sleeve 3301507-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 60mm, length 65mm, quantity per set: 1pcs fits: LEXUS IS I, IS SPORTCROSS 04.99-10.05

View part

MPBS Polyurethane suspension sleeve 3301507-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 65mm fits: LEXUS IS I, IS SPORTCROSS 04.99-10.05

View part

MPBS Polyurethane suspension sleeve 3301804-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 64mm, length 74mm, quantity per set: 1pcs fits: LEXUS LS 12.94-12.00

View part

MPBS Polyurethane suspension sleeve 3301804-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 64mm, length 74mm fits: LEXUS LS 12.94-12.00

View part

MPBS Polyurethane suspension sleeve 3302748-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 32,5mm, length 165mm, quantity per set: 1pcs fits: LEXUS RX TOYOTA CAMRY, HIGHLANDER / KLUGER, SIENNA, VENZA 08.01-

View part

MPBS Polyurethane suspension sleeve 3302748-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 32,5mm, length 165mm, quantity per set: 1pcs fits: LEXUS RX TOYOTA CAMRY, HIGHLANDER / KLUGER, SIENNA, VENZA 08.01-

View part

MPBS Polyurethane suspension sleeve 3302749-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 60,4mm, length 62,8mm, quantity per set: 1pcs fits: LEXUS RX TOYOTA CAMRY, HIGHLANDER / KLUGER, PREVIA II, VENZA 02.00-03.21

View part

MPBS Polyurethane suspension sleeve 3302749-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60,4mm, length 62,8mm fits: LEXUS RX TOYOTA CAMRY, HIGHLANDER / KLUGER, PREVIA II, VENZA 02.00-03.21

View part

MPBS Polyurethane suspension sleeve 3303107-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 60,4mm, length 60mm, quantity per set: 1pcs fits: LEXUS GS 01.93-08.97

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account