Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 3303107-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 60,4mm, length 60mm, quantity per set: 1pcs fits: LEXUS GS 01.93-08.97

View part

MPBS Polyurethane suspension sleeve 3303207-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 77mm, length 73mm fits: LEXUS GS, IS C, IS II, IS III, LS 08.00-

View part

MPBS Polyurethane suspension sleeve 3303207-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 77mm, length 73mm fits: LEXUS GS, IS C, IS II, IS III, LS 08.00-

View part

MPBS Polyurethane suspension sleeve 3303208-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 35,2/36,3mm, length 48,5mm fits: LEXUS GS, IS C, IS II, IS III 04.05-

View part

MPBS Polyurethane suspension sleeve 3303208-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 35,2/36,3mm, length 48,5mm fits: LEXUS GS, IS C, IS II, IS III 04.05-

View part

MPBS Polyurethane suspension sleeve 34001138A-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 34001138A-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 34001138B-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 34001138B-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 34001138C-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 34001138C-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3700602-PZ/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3700602-PZ/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3700607-00/80SHA

Front lower Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 62mm, length 79mm, quantity per set: 1pcs fits: MAZDA 6 01.02-02.08

View part

MPBS Polyurethane suspension sleeve 3700607-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 62mm, length 79mm fits: MAZDA 6 01.02-02.08

View part

MPBS Polyurethane suspension sleeve 3700608-00/80SHA

Front upper Swingarm bushing, hardness: 80 Sha, outer diameter: 40mm, length 45mm, quantity per set: 1pcs fits: MAZDA 6 01.02-02.08

View part

MPBS Polyurethane suspension sleeve 3700608-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 45mm fits: MAZDA 6 01.02-02.08

View part

MPBS Polyurethane suspension sleeve 3700610-00/80SHA

Front lower Swingarm bushing outer, hardness: 80 Sha, outer diameter: 44mm, length 49mm, quantity per set: 1pcs fits: MAZDA 6 01.02-02.08

View part

MPBS Polyurethane suspension sleeve 3700610-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 44mm, length 49mm fits: MAZDA 6 01.02-02.08

View part

MPBS Polyurethane suspension sleeve 3700611-00/80SHA

Front Swingarm bushing (Inner), hardness: 80 Sha, outer diameter: 40mm, length 57mm, quantity per set: 1pcs fits: MAZDA 6 01.02-02.08

View part

MPBS Polyurethane suspension sleeve 3700611-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 57mm fits: MAZDA 6 01.02-02.08

View part

MPBS Polyurethane suspension sleeve 3700706-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40mm, length 57mm fits: MAZDA 6 08.07-07.13

View part

MPBS Polyurethane suspension sleeve 3700706-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 57mm fits: MAZDA 6 08.07-07.13

View part

MPBS Polyurethane suspension sleeve 3700707-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 74,4mm, length 71mm fits: MAZDA 6 08.07-07.13

View part

MPBS Polyurethane suspension sleeve 3700707-00/90SHA

Polyurethane bushing, hardness: 90 Sha, fits: MAZDA 6 1.8-2.5 08.07-07.13

View part

MPBS Polyurethane suspension sleeve 3700708-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40mm, length 44mm fits: MAZDA 6 08.07-07.13

View part

MPBS Polyurethane suspension sleeve 3700708-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 44mm fits: MAZDA 6 08.07-07.13

View part

MPBS Polyurethane suspension sleeve 3700710-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 44mm, length 49mm fits: MAZDA 6 08.07-07.13

View part

MPBS Polyurethane suspension sleeve 3700710-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 44mm, length 49mm fits: MAZDA 6 08.07-07.13

View part

MPBS Polyurethane suspension sleeve 3702530-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3702530-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 37026128A-00/80SHA

Polyurethane bushing fits: MAZDA CX-7, CX-9 06.06-

View part

MPBS Polyurethane suspension sleeve 37026128A-00/90SHA

Polyurethane bushing fits: MAZDA CX-7, CX-9 06.06-

View part

MPBS Polyurethane suspension sleeve 37026128B-00/80SHA

Polyurethane bushing fits: MAZDA CX-7, CX-9 06.06-

View part

MPBS Polyurethane suspension sleeve 37026128B-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 37026128C-00/80SHA

Polyurethane bushing fits: MAZDA CX-7, CX-9 06.06-

View part

MPBS Polyurethane suspension sleeve 37026128C-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3702629-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3702629-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3703121-00/80SHA

Rear lower Swingarm bushing (outer), hardness: 80 Sha, outer diameter: 44,5mm, quantity per set: 1pcs fits: MAZDA MX-5 I, MX-5 II 05.90-10.05

View part

MPBS Polyurethane suspension sleeve 3703121-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3703122-00/80SHA

Rear lower Swingarm bushing (inner), hardness: 80 Sha, quantity per set: 1pcs fits: MAZDA MX-5 I, MX-5 II 05.90-10.05

View part

MPBS Polyurethane suspension sleeve 3703153-00/80SHA

Rear beam bushing, outer diameter: 66mm, length 64mm, quantity per set: 1pcs fits: MAZDA MX-5 I, MX-5 II 05.90-10.05

View part

MPBS Polyurethane suspension sleeve 3703153-00/90SHA

Polyurethane bushing, outer diameter: 66mm, length 64mm fits: MAZDA MX-5 I, MX-5 II 05.90-10.05

View part

MPBS Polyurethane suspension sleeve 3703185-00/80SHA

Rear upper Swingarm bushing, hardness: 80 Sha, outer diameter: 47mm, quantity per set: 1pcs fits: MAZDA MX-5 I, MX-5 II 05.90-10.05

View part

MPBS Polyurethane suspension sleeve 3703429-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 3703429-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 45mm, quantity per set: 1pcs fits: MAZDA MX-5 III, RX-8 TOYOTA CELICA 08.99-12.14

View part

MPBS Polyurethane suspension sleeve 3703429-00/80SHA/22

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 45mm, quantity per set: 1pcs fits: MAZDA MX-5 III, RX-8 TOYOTA CELICA 08.99-12.14

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account