Partios Wholesale catalogue
Mpbs Distributor | Suspension & Steering
Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)
2,629 current catalogue lines
About the MPBS range
Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MPBS Polyurethane suspension sleeve 2900808-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 45,9mm, length 50mm fits: JEEP GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 29008100-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29008100-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 38,9mm, length 40,5mm fits: JEEP GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 29008109-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 49,6/50,1mm, length 70mm fits: JEEP COMMANDER, GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 29008109-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 49,6/50,1mm, length 70mm fits: JEEP COMMANDER, GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 29008110-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29008110/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29008121-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29008121-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29008152-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 57,3mm, length 53mm, quantity per set: 1pcs fits: JEEP COMMANDER, GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 29008152-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 57,3mm, length 53mm fits: JEEP GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 29008167-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 56,7mm, length 138mm, quantity per set: 1pcs, cartridge fits: JEEP COMMANDER, GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 29008167-00/90SHA
Polyurethane bushing, hardness: 90 Sha, fits: JEEP GRAND CHEROKEE III 3.0D-6.1 10.04-10.11
View partMPBS Polyurethane suspension sleeve 29008176-00/80SHA
Polyurethane shock absorber bushing, hardness: 80 Sha, outer diameter: 45mm, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE III 10.04-12.10
View partMPBS Polyurethane suspension sleeve 29008176-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29008188-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 60,8mm, length 67mm, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 29008188-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 60,8mm, length 67mm fits: JEEP GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 29008189-00/80SHA
Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 56,8mm, length 72mm, quantity per set: 1pcs fits: DODGE NITRO JEEP GRAND CHEROKEE III 10.04-12.12
View partMPBS Polyurethane suspension sleeve 29008189-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 56,8mm, length 72mm fits: DODGE NITRO JEEP GRAND CHEROKEE III 10.04-12.12
View partMPBS Polyurethane suspension sleeve 29008190A-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 47,3mm, length 60mm fits: DODGE NITRO JEEP GRAND CHEROKEE III 10.04-12.12
View partMPBS Polyurethane suspension sleeve 29008190A-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 47,3mm, length 60mm fits: DODGE NITRO JEEP GRAND CHEROKEE III 10.04-12.12
View partMPBS Polyurethane suspension sleeve 29008190B-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 47,3mm, length 56,5mm fits: JEEP COMMANDER, GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 29008190B-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 47,3mm, length 56,5mm fits: JEEP COMMANDER, GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 2900829-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900829-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900830-00/80SHA
Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 2900830-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900831-00/80SHA
Polyurethane bushing, hardness: 80 Sha, quantity per set: 4pcs fits: JEEP GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 2900831-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900908-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 45/46mm, length 45mm fits: JEEP GRAND CHEROKEE, GRAND CHEROKEE IV 11.10-
View partMPBS Polyurethane suspension sleeve 2900908-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 45/46mm, length 45mm fits: JEEP GRAND CHEROKEE, GRAND CHEROKEE IV 11.10-
View partMPBS Polyurethane suspension sleeve 29009109-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 52,4mm, length 72mm fits: MERCEDES GL (X166), GLE (W166), GLS (X166), M (W166) DODGE DURANGO JEEP GRAND CHEROKEE IV 11.10-
View partMPBS Polyurethane suspension sleeve 29009109-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 52,4mm, length 72mm fits: MERCEDES GL (X166), GLE (W166), GLS (X166), M (W166) DODGE DURANGO JEEP GRAND CHEROKEE IV 11.10-
View partMPBS Polyurethane suspension sleeve 2901467-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2901467-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2901491-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2901491-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29016145-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29016145-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29016145+46/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29016146-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29016146-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2901699-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2901699-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 41,5mm fits: JEEP WRANGLER III 04.07-
View partMPBS Polyurethane suspension sleeve 3200101/80SHA
Polyurethane bushing, hardness: 80 Sha fits: LAND ROVER DEFENDER, DISCOVERY I, RANGE ROVER I 07.70-02.16
View partMPBS Polyurethane suspension sleeve 3200101/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 3200102/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 3200102/90SHA
Polyurethane bushing,
View partBuying with Partios
Buying MPBS parts through Partios
Are these genuine MPBS parts?
- Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MPBS parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.
Do you supply MPBS parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MPBS parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MPBS order?
- It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MPBS parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account