Partios Wholesale catalogue
Mpbs Distributor | Suspension & Steering
Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)
2,629 current catalogue lines
About the MPBS range
Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MPBS Polyurethane suspension sleeve 2900706-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 55,5/79,5mm, length 78,5mm, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE II 09.98-09.05
View partMPBS Polyurethane suspension sleeve 2900706-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 55,5/79,5mm, length 78,5mm fits: JEEP GRAND CHEROKEE II 09.98-09.05
View partMPBS Polyurethane suspension sleeve 2900707-00/80SHA
Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 54,1mm, length 70,8mm, quantity per set: 1pcs, cartridge fits: JEEP GRAND CHEROKEE I, GRAND CHEROKEE II 09.91-09.05
View partMPBS Polyurethane suspension sleeve 2900707-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 54,1mm, length 70,8mm fits: JEEP GRAND CHEROKEE II 09.98-09.05
View partMPBS Polyurethane suspension sleeve 2900708-00/80SHA
Front upper Swingarm bushing, hardness: 80 Sha, outer diameter: 44,6mm, length 50mm, quantity per set: 4pcs fits: JEEP GRAND CHEROKEE II 09.98-09.05
View partMPBS Polyurethane suspension sleeve 2900708-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 44,6mm, length 50mm fits: JEEP GRAND CHEROKEE II 09.98-09.05
View partMPBS Polyurethane suspension sleeve 29007121-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29007121-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29007130-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29007130-00/80SHA/16
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 30mm, quantity per set: 2pcs, fitting to frame fits: JEEP CHEROKEE, GRAND CHEROKEE I 10.84-09.01
View partMPBS Polyurethane suspension sleeve 29007130-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29007145-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29007145-00/90SHA
Polyurethane spring washer, hardness: 90 Sha, outer diameter: 138mm, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE II 10.98-09.05
View partMPBS Polyurethane suspension sleeve 29007146-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29007146-00/90SHA
Polyurethane spring washer, hardness: 90 Sha, outer diameter: 160mm, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE II 10.98-09.05
View partMPBS Polyurethane suspension sleeve 29007147-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29007147/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29007199-10-00/80SHA
Polyurethane bushing fits: JEEP GRAND CHEROKEE II 10.98-09.05
View partMPBS Polyurethane suspension sleeve 29007199-10-00/90SHA
Panhard rod bushings M10, 1pcs, alignment rod, L/R, bottom, hardness: 90 Sha,
View partMPBS Polyurethane suspension sleeve 29007199-12-00/90SHA
Panhard rod bushings M12, hardness: 90 Sha, outer diameter: 45,5mm, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE II 10.98-09.05
View partMPBS Polyurethane suspension sleeve 29007199M-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 29007199M-00/90SHA
Panhard rod bushings M12, hardness: 90 Sha, outer diameter: 38,7mm, length 41mm, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE II 09.98-09.05
View partMPBS Polyurethane suspension sleeve 2900729-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900729-00/80SHA/25
Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE II 04.99-09.05
View partMPBS Polyurethane suspension sleeve 2900729-00/80SHA/28
Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE II 04.99-09.05
View partMPBS Polyurethane suspension sleeve 2900729-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900729-00/90SHA/25
Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE II 04.99-09.05
View partMPBS Polyurethane suspension sleeve 2900729-00/90SHA/28
Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE II 04.99-09.05
View partMPBS Polyurethane suspension sleeve 2900731-00/80SHA/
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 34,5mm, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE II 10.98-09.05
View partMPBS Polyurethane suspension sleeve 2900731-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900732-00/80SHA/
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 34,5mm, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE II 10.98-09.05
View partMPBS Polyurethane suspension sleeve 2900732-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900756-00/65SHA
Polyurethane bushing, hardness: 65 Sha fits: JEEP GRAND CHEROKEE I, GRAND CHEROKEE II 09.91-09.05
View partMPBS Polyurethane suspension sleeve 2900756-00/80SHA
Polyurethane bushing fits: JEEP GRAND CHEROKEE I, GRAND CHEROKEE II 09.91-09.05
View partMPBS Polyurethane suspension sleeve 2900756-00/90SHA
Polyurethane bushing fits: JEEP GRAND CHEROKEE I, GRAND CHEROKEE II 09.91-09.05
View partMPBS Polyurethane suspension sleeve 2900786-00/80SHA
Rear Swingarm bushing, hardness: 80 Sha, outer diameter: 54,5mm, length 73mm, quantity per set: 2pcs fits: JEEP CHEROKEE, GRAND CHEROKEE II 09.98-01.08
View partMPBS Polyurethane suspension sleeve 2900786-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 54,5mm, length 73mm fits: JEEP GRAND CHEROKEE II 09.98-09.05
View partMPBS Polyurethane suspension sleeve 2900790-00/80SHA
Polyurethane shock absorber bushing, hardness: 80 Sha, quantity per set: 4pcs fits: JEEP GRAND CHEROKEE II 10.98-09.05
View partMPBS Polyurethane suspension sleeve 2900790-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900801/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900801/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900803-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900803/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2900806-00/80SHA
Polyurethane bushing, hardness: 80 Sha, quantity per set: 2pcs fits: JEEP COMMANDER, GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 2900806-00/90SHA
Polyurethane bushing, hardness: 90 Sha, quantity per set: 2pcs fits: JEEP COMMANDER, GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 2900807-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 49,6mm, length 57,4mm fits: JEEP GRAND CHEROKEE III 10.04-10.11
View partMPBS Polyurethane suspension sleeve 2900807-00/90SHA
Polyurethane bushing, hardness: 90 Sha, fits: JEEP GRAND CHEROKEE III 3.0D-6.1 10.04-10.11
View partMPBS Polyurethane suspension sleeve 2900808-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 45,9mm, length 50mm fits: JEEP GRAND CHEROKEE III 10.04-10.11
View partBuying with Partios
Buying MPBS parts through Partios
Are these genuine MPBS parts?
- Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MPBS parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.
Do you supply MPBS parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MPBS parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MPBS order?
- It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MPBS parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account