Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 29006103-00/80SHA

Polyurethane shock absorber bushing, 1pcs, shock absorber, L/R, bottom/top, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 29006103-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 29006145-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 29006145-00/90SHA

Polyurethane spring washer, hardness: 90 Sha, outer diameter: 109mm, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE I 09.91-04.99

View part

MPBS Polyurethane suspension sleeve 29006146-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 29006146-00/90SHA

Polyurethane spring washer, hardness: 90 Sha, outer diameter: 105mm, quantity per set: 1pcs fits: JEEP GRAND CHEROKEE I 09.91-04.99

View part

MPBS Polyurethane suspension sleeve 29006199M-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 29006199M-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900629-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900629-00/80SHA/23

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 50mm, quantity per set: 2pcs fits: JEEP CHEROKEE, GRAND CHEROKEE I 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900629-00/80SHA/25

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 50mm, quantity per set: 2pcs fits: JEEP CHEROKEE, GRAND CHEROKEE I 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900629-00/80SHA/28

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 50mm, quantity per set: 2pcs fits: JEEP CHEROKEE, GRAND CHEROKEE I 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900629-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900630-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900630-00/80SHA/13

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 50mm, quantity per set: 2pcs fits: JEEP CHEROKEE, GRAND CHEROKEE I 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900630-00/80SHA/15

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 50mm, quantity per set: 2pcs fits: JEEP CHEROKEE, GRAND CHEROKEE I 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900630-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900631-00/80SHA

Polyurethane shock absorber bushing, hardness: 80 Sha, outer diameter: 32mm, quantity per set: 1pcs fits: JEEP CHEROKEE, GRAND CHEROKEE I 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900631-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900634P-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 34mm, quantity per set: 1pcs fits: JEEP CHEROKEE 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900634P-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900634P-671-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900634P-671-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900634P-671/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 6pcs fits: JEEP CHEROKEE 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900634P-671/90SHA

Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 6pcs fits: JEEP CHEROKEE 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900634T-00/80SHA

Polyurethane shock absorber bushing, hardness: 80 Sha, outer diameter: 32mm, quantity per set: 1pcs fits: JEEP CHEROKEE 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900634T-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900634T-631-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900634T-631-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900634T-631/80SHA

Polyurethane shock absorber bushing, hardness: 80 Sha, quantity per set: 6pcs fits: JEEP CHEROKEE 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900634T-631/90SHA

Polyurethane shock absorber bushing, hardness: 90 Sha, quantity per set: 6pcs fits: JEEP CHEROKEE 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900668-00/80SHA

Rear leaf spring bushings (front), hardness: 80 Sha, outer diameter: 52mm, quantity per set: 2pcs fits: JEEP CHEROKEE 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900668-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900668-691-692-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900668-692-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900668-692/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900671-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 30mm, quantity per set: 1pcs fits: JEEP CHEROKEE, GRAND CHEROKEE I 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900671-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900691-00/80SHA

Rear leaf spring hanger bushings, hardness: 80 Sha, outer diameter: 48mm, quantity per set: 2pcs fits: JEEP CHEROKEE 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900691-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900692-00/80SHA

Rear leaf spring bushings (rear), hardness: 80 Sha, outer diameter: 70,5mm, quantity per set: 2pcs fits: JEEP CHEROKEE 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900692-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900701 80SHA

Polyurethane bushing fits: JEEP GRAND CHEROKEE II 10.98-09.05

View part

MPBS Polyurethane suspension sleeve 2900701/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900702 80SHA

Polyurethane bushing fits: JEEP GRAND CHEROKEE II 10.98-09.05

View part

MPBS Polyurethane suspension sleeve 2900702/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900703 80SHA

Polyurethane bushing fits: JEEP GRAND CHEROKEE II 10.98-09.05

View part

MPBS Polyurethane suspension sleeve 2900703/90SHA

Polyurethane bushing,

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account