Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 2201549-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 69mm, length 67mm, quantity per set: 1pcs fits: HONDA CIVIC VIII 09.05-01.12

View part

MPBS Polyurethane suspension sleeve 2201549-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 69mm, length 67mm, quantity per set: 1pcs fits: HONDA CIVIC VIII 09.05-01.12

View part

MPBS Polyurethane suspension sleeve 2201553-00/80SHA

Polyurethane rear beam bushing, hardness: 80 Sha, outer diameter: 743mm, length 90mm, quantity per set: 1pcs fits: HONDA CIVIC VIII, INSIGHT, JAZZ III 04.00-12.15

View part

MPBS Polyurethane suspension sleeve 2201553-00/90SHA

Polyurethane rear beam bushing, hardness: 90 Sha, outer diameter: 743mm, length 90mm, quantity per set: 1pcs fits: HONDA CIVIC VIII, INSIGHT, JAZZ III 04.00-12.15

View part

MPBS Polyurethane suspension sleeve 2201648-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 67,3mm, length 63mm fits: HONDA CIVIC IX 02.12-

View part

MPBS Polyurethane suspension sleeve 2201648-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 67,3mm, length 63mm fits: HONDA CIVIC IX 02.12-

View part

MPBS Polyurethane suspension sleeve 22020171-00/80SHA

Polyurethane shock absorber bushing, hardness: 80 Sha, outer diameter: 57mm, quantity per set: 1pcs fits: HONDA CR-V III, CR-V IV 06.06-12.18

View part

MPBS Polyurethane suspension sleeve 22020171-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2401353-00/80SHA

Polyurethane bushing, outer diameter: 70,5mm, length 79mm fits: HYUNDAI ACCENT IV, I10 II, I20 I, IX20 KIA PICANTO II, RIO III 08.08-12.19

View part

MPBS Polyurethane suspension sleeve 2401353-00/90SHA

Polyurethane bushing, outer diameter: 70,5mm, length 79mm fits: HYUNDAI ACCENT IV, I10 II, I20 I, IX20 KIA PICANTO II, RIO III 08.08-12.19

View part

MPBS Polyurethane suspension sleeve 2402202/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2402202/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2402229-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2402229-00/80SHA/22

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: MERCEDES E (W210), S (W140) 02.91-03.02

View part

MPBS Polyurethane suspension sleeve 2402229-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2402248-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 322mm, length 140mm, quantity per set: 1pcs fits: HYUNDAI HIGHWAY, SANTA FÉ I, TRAJET 09.99-07.08

View part

MPBS Polyurethane suspension sleeve 2402248-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 322mm, length 140mm, quantity per set: 1pcs fits: HYUNDAI HIGHWAY, SANTA FÉ I, TRAJET 09.99-07.08

View part

MPBS Polyurethane suspension sleeve 2402249-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 64mm, length 63mm, quantity per set: 1pcs fits: HYUNDAI SANTA FÉ I 08.00-03.06

View part

MPBS Polyurethane suspension sleeve 2402249-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 64mm, length 63mm, quantity per set: 1pcs fits: HYUNDAI SANTA FÉ I 08.00-03.06

View part

MPBS Polyurethane suspension sleeve 2402349-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 70mm, quantity per set: 1pcs fits: HYUNDAI SONATA IV 03.98-11.04

View part

MPBS Polyurethane suspension sleeve 2402349-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2402602/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2402602/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 24026176-00/80SHA

Polyurethane shock absorber bushing, hardness: 80 Sha, outer diameter: 42,3mm, length 60mm, quantity per set: 1pcs fits: HYUNDAI TUCSON KIA SPORTAGE III, SPORTAGE IV, SPORTAGE V 06.10-

View part

MPBS Polyurethane suspension sleeve 24026176-00/90SHA

Polyurethane shock absorber bushing, hardness: 90 Sha, outer diameter: 42,3mm, length 60mm, quantity per set: 1pcs fits: HYUNDAI TUCSON KIA SPORTAGE III, SPORTAGE IV, SPORTAGE V 06.10-

View part

MPBS Polyurethane suspension sleeve 2800348-00/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 66,2mm, length 60mm, quantity per set: 1pcs fits: HYUNDAI COUPE II, GRANDEUR, I20 I, I20 II, I30, I40 I, I40 I CW, MATRIX 11.00-

View part

MPBS Polyurethane suspension sleeve 2800348-00/90SHA

Polyurethane suspension sleeve, hardness: 90 Sha, outer diameter: 66,2mm, length 60mm, quantity per set: 1pcs fits: HYUNDAI COUPE II, GRANDEUR, I20 I, I20 II, I30, I40 I, I40 I CW, MATRIX 11.00-

View part

MPBS Polyurethane suspension sleeve 2800349-00/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 38mm, length 55mm, quantity per set: 1pcs fits: HYUNDAI ELANTRA IV, I30, TUCSON KIA CARENS III, CEE'D, MAGENTIS II 06.04-05.23

View part

MPBS Front track control arm silent block 2800349-00/90SHA

Front track control arm silent block front L/R (12x38x55 mm) fits: HYUNDAI ELANTRA IV, I30, TUCSON KIA CARENS III, CEE'D, MAGENTIS II, OPTIMA, PRO CEE'D, SOUL II 1.4-Electric 06.04-05.23

View part

MPBS Polyurethane suspension sleeve 28017102-00/80SHA

Polyurethane shock absorber bushing, hardness: 80 Sha, outer diameter: 42mm, length 41mm, quantity per set: 1pcs fits: KIA SORENTO I 08.02-12.11

View part

MPBS Polyurethane suspension sleeve 28017102-00/90SHA

Polyurethane bushing, hardness: 90 Sha, fits: KIA SORENTO I 2.4-3.5 08.02-12.11

View part

MPBS Polyurethane suspension sleeve 2802108A-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 45,3mm, length 40mm, quantity per set: 1pcs fits: KIA K2500, K2500 II, K2700, K2700 II, K2700 III, K2900 10.99-

View part

MPBS Polyurethane suspension sleeve 2802108A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45,3mm, length 40mm, quantity per set: 1pcs fits: KIA K2500, K2500 II, K2700, K2700 II, K2700 III, K2900 10.99-

View part

MPBS Polyurethane suspension sleeve 2802108B-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 45,3mm, length 71mm, quantity per set: 1pcs fits: KIA K2500, K2500 II, K2700, K2700 II, K2700 III, K2900 10.99-

View part

MPBS Polyurethane suspension sleeve 2802108B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45,3mm, length 71mm, quantity per set: 1pcs fits: KIA K2500, K2500 II, K2700, K2700 II, K2700 III, K2900 10.99-

View part

MPBS Polyurethane suspension sleeve 2802192-00/80SHA

Rear leaf spring bushing, hardness: 80 Sha, outer diameter: 32mm, length 43mm, quantity per set: 1pcs fits: KIA K2500, K2500 II, K2700, K2700 II, K2700 III, K2900 10.99-

View part

MPBS Polyurethane suspension sleeve 2802192-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 32mm, length 43mm fits: KIA K2500, K2700, K2900 01.03-

View part

MPBS Polyurethane suspension sleeve 2802249-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 69,9mm, length 60mm, quantity per set: 1pcs fits: HYUNDAI H-1 CARGO, H-1 TRAVEL, I30 KIA CEE'D, CERATO III, PRO CEE'D 02.08-

View part

MPBS Polyurethane suspension sleeve 2802249-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 69,9mm, length 60mm, quantity per set: 1pcs fits: HYUNDAI H-1 CARGO, H-1 TRAVEL, I30 KIA CEE'D, CERATO III, PRO CEE'D 02.08-

View part

MPBS Polyurethane suspension sleeve 29001145-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 29001145-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 29001168-00/80SHA

Polyurethane buffer, hardness: 80 Sha, quantity per set: 1pcs fits: JEEP CHEROKEE 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 29001168-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900601/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900608-00/80SHA

Front upper Swingarm bushing, hardness: 80 Sha, outer diameter: 54,5mm, quantity per set: 4pcs, cartridge fits: JEEP CHEROKEE, GRAND CHEROKEE I 10.84-09.01

View part

MPBS Polyurethane suspension sleeve 2900608-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2900609-00/80SHA

Front lower Swingarm bushing, hardness: 80 Sha, outer diameter: 55,1mm, length 67,2mm, quantity per set: 4pcs, cartridge fits: JEEP CHEROKEE, GRAND CHEROKEE I, GRAND CHEROKEE II 10.83-04.07

View part

MPBS Polyurethane suspension sleeve 2900609-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 55,1mm, length 67,2mm fits: JEEP CHEROKEE, GRAND CHEROKEE I, GRAND CHEROKEE II, WRANGLER II 10.83-04.07

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account