Partios Wholesale catalogue
Mpbs Distributor | Suspension & Steering
Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)
2,629 current catalogue lines
About the MPBS range
Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MPBS Polyurethane suspension sleeve 2201229-00/80SHA/18
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 46mm, quantity per set: 2pcs fits: HONDA CIVIC V, CIVIC VI, CRX III, INTEGRA ROVER 400 II, 45 I 10.91-05.05
View partMPBS Polyurethane suspension sleeve 2201229-00/80SHA/21
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 46mm, quantity per set: 2pcs fits: HONDA CIVIC V, CIVIC VI, CRX III, INTEGRA ROVER 400 II, 45 I 10.91-05.05
View partMPBS Polyurethane suspension sleeve 2201229-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201229-00/90SHA/21
Polyurethane stabilizer bushing, hardness: 90 Sha, outer diameter: 46mm, quantity per set: 2pcs fits: HONDA CIVIC V, CIVIC VI, CRX III, INTEGRA ROVER 400 II, 45 I 10.91-05.05
View partMPBS Polyurethane suspension sleeve 2201230-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201230-00/80SHA/13
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 28mm, quantity per set: 2pcs fits: HONDA ACCORD IV, CIVIC IV, CIVIC V, CIVIC VI, CRX II, CRX III 09.87-
View partMPBS Polyurethane suspension sleeve 2201230-00/80SHA/15
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 28mm, quantity per set: 2pcs fits: HONDA ACCORD IV, CIVIC IV, CIVIC V, CIVIC VI, CRX II, CRX III 09.87-
View partMPBS Polyurethane suspension sleeve 2201230-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201230-00/90SHA/13
Polyurethane stabilizer bushing, hardness: 90 Sha, outer diameter: 28mm, quantity per set: 2pcs fits: HONDA ACCORD IV, CIVIC IV, CIVIC V, CIVIC VI, CRX II, CRX III 09.87-
View partMPBS Polyurethane suspension sleeve 2201232-00/80SHA
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 27mm, quantity per set: 4pcs fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CRX II, CRX III 09.87-02.01
View partMPBS Polyurethane suspension sleeve 2201232-00/90SHA
Polyurethane stabilizer bushing, hardness: 90 Sha, outer diameter: 27mm, quantity per set: 4pcs fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CRX II, CRX III 09.87-02.01
View partMPBS Polyurethane suspension sleeve 2201234-00/80SHA
Shock absorber spacers (front/rear), hardness: 80 Sha, outer diameter: 42mm, quantity per set: 4pcs fits: HONDA ACCORD III, ACCORD IV, ACCORD VI, ACCORD VIII, CIVIC III, CIVIC IV, CIVIC V 10.83-
View partMPBS Polyurethane suspension sleeve 2201234-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201258-00/80SHA
Rear lower Swingarm bushing (outer/ inner) 31mm, hardness: 80 Sha, outer diameter: 31,4mm, length 50mm, quantity per set: 1pcs fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CRX II, CRX III 09.87-05.05
View partMPBS Polyurethane suspension sleeve 2201258-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 31,4mm, length 50mm fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CRX II, CRX III ROVER 400 II 09.87-03.01
View partMPBS Polyurethane suspension sleeve 2201258VTI-00/80SHA
Rear lower Swingarm bushing (outer/ inner) 35mm, hardness: 80 Sha, outer diameter: 35,3mm, length 50mm, quantity per set: 1pcs fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CRX II, CRX III 09.87-05.05
View partMPBS Polyurethane suspension sleeve 2201258VTI-00/90SHA
Rear lower Swingarm bushing (outer/ inner) 35mm, hardness: 90 Sha, outer diameter: 35,3mm, length 50mm, quantity per set: 1pcs fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CRX III 09.87-02.01
View partMPBS Polyurethane suspension sleeve 2201301A/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201301A/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201301B/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201301B/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201302A/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201302A/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201302B/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201302B/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201303/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201303/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201307-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 53,5mm, length 60mm fits: HONDA CIVIC VI, CR-V I 06.95-02.02
View partMPBS Polyurethane suspension sleeve 2201307-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 53,5mm, length 60mm fits: HONDA CIVIC VI, CR-V I 06.95-02.02
View partMPBS Polyurethane suspension sleeve 2201308-00/80SHA
Front upper Swingarm bushing, hardness: 80 Sha, outer diameter: 34mm, quantity per set: 1pcs fits: HONDA CIVIC VI 06.95-02.01
View partMPBS Polyurethane suspension sleeve 2201308-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201312-00/80SHA
Front lower Swingarm bushing outer, hardness: 80 Sha, outer diameter: 48,5mm, quantity per set: 2pcs, fits only tin track control arms fits: HONDA CIVIC VI, CR-V I 09.94-02.02
View partMPBS Polyurethane suspension sleeve 2201312-00/90SHA
Front lower Swingarm bushing outer, 2pcs, front bottom swingarm, L/R, bottom, hardness: 90 Sha, fits only tin track control arms
View partMPBS Polyurethane suspension sleeve 2201320-00/80SHA
Rear lower Swingarm bushing (central), hardness: 80 Sha, outer diameter: 37,2mm, length 40mm, quantity per set: 1pcs fits: HONDA CIVIC VI 06.95-03.01
View partMPBS Polyurethane suspension sleeve 2201320-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 37,2mm, length 40mm fits: HONDA CIVIC VI 10.95-03.01
View partMPBS Polyurethane suspension sleeve 2201321-22-00/80SHA
Rear lower Swingarm bushing (inner/ outer), hardness: 80 Sha, outer diameter: 31,2mm, length 50mm, quantity per set: 1pcs fits: HONDA CIVIC VI 10.95-03.01
View partMPBS Polyurethane suspension sleeve 2201321-22-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 31,2mm, length 50mm fits: HONDA CIVIC VI 10.95-03.01
View partMPBS Polyurethane suspension sleeve 2201448-00/80SHA
Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 65,6mm, length 64mm, quantity per set: 1pcs fits: ACURA RSX HONDA CIVIC VII, CR-V II, ELEMENT, INTEGRA 11.00-
View partMPBS Polyurethane suspension sleeve 2201448-00/90SHA
Polyurethane bushing, transverse track control arm, hardness: 90 Sha, fits: ACURA RSX HONDA CIVIC VII, CR-V II, ELEMENT, INTEGRA 1.3H-2.4 11.00-12.11
View partMPBS Polyurethane suspension sleeve 2201449-00/80SHA
Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 426mm, length 63mm, quantity per set: 1pcs fits: ACURA RSX HONDA CIVIC VII, CR-V II, ELEMENT, INTEGRA 11.00-
View partMPBS Polyurethane suspension sleeve 2201449-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 426mm, length 63mm fits: ACURA RSX HONDA CIVIC VII, CR-V II, ELEMENT, FR-V, INTEGRA 11.00-12.11
View partMPBS Exhaust system hanger 2201451-00/60SHA
Exhaust system hanger fits: HONDA ACCORD VII, CIVIC VII, HR-V, S2000 1.3H-2.4 03.99-
View partMPBS Polyurethane suspension sleeve 2201451-00/80SHA
Muffler hanger fits: HONDA ACCORD VII 10.02-
View partMPBS Polyurethane suspension sleeve 2201451-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201529-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201529-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201548-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 2201548-00/90SHA
Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 38mm, length 59mm, quantity per set: 1pcs fits: HONDA CIVIC VIII 09.05-01.12
View partBuying with Partios
Buying MPBS parts through Partios
Are these genuine MPBS parts?
- Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MPBS parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.
Do you supply MPBS parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MPBS parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MPBS order?
- It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MPBS parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account