Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 2104836AB-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2104836AB-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2104836AB/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 1pcs fits: FORD SCORPIO I 04.85-12.94

View part

MPBS Polyurethane suspension sleeve 2104848-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 32mm, length 58mm, quantity per set: 1pcs fits: FORD GRANADA II, SCORPIO I, SIERRA, SIERRA I, SIERRA II 06.79-12.94

View part

MPBS Polyurethane suspension sleeve 2104848-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 32mm, length 58mm fits: FORD SCORPIO I, SIERRA I, SIERRA II 08.82-12.94

View part

MPBS Polyurethane suspension sleeve 2104849-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 48mm, length 23mm, quantity per set: 1pcs fits: FORD SCORPIO I, SIERRA, SIERRA I, SIERRA II 08.82-12.94

View part

MPBS Polyurethane suspension sleeve 2104849-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 48mm, length 23mm fits: FORD SCORPIO I, SIERRA, SIERRA I, SIERRA II 08.82-12.94

View part

MPBS Polyurethane suspension sleeve 2104853-00/60SHA

Rear beam bushing, hardness: 60 Sha, outer diameter: 100mm, length 85mm, quantity per set: 1pcs fits: FORD SCORPIO I, SIERRA, SIERRA I, SIERRA II 08.82-12.94

View part

MPBS Polyurethane suspension sleeve 2104853-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2104853-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 100mm, length 85mm fits: FORD SCORPIO I, SIERRA I, SIERRA II 08.82-12.94

View part

MPBS Polyurethane suspension sleeve 2104901/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2104901/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 21049121-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 22mm, quantity per set: 1pcs fits: FORD SCORPIO II 10.94-08.98

View part

MPBS Polyurethane suspension sleeve 21049121-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2104929-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2104929-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 43mm, quantity per set: 1pcs fits: FORD COUGAR, MONDEO II 08.96-12.01

View part

MPBS Polyurethane suspension sleeve 2104929-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2104930-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2104930-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 30,5mm, quantity per set: 1pcs fits: FORD SCORPIO II 10.94-08.98

View part

MPBS Polyurethane suspension sleeve 2104930-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2104948-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 33,8mm, length 60mm, quantity per set: 1pcs fits: FORD SCORPIO II 10.94-08.98

View part

MPBS Polyurethane suspension sleeve 2104948-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 33,8mm, length 60mm fits: FORD SCORPIO II 10.94-08.98

View part

MPBS Polyurethane suspension sleeve 2104949-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 65,5mm, length 83mm, quantity per set: 1pcs fits: FORD SCORPIO II 10.94-08.98

View part

MPBS Polyurethane suspension sleeve 2104949-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 65,5mm, length 83mm fits: FORD SCORPIO II 10.94-08.98

View part

MPBS Polyurethane suspension sleeve 2104953-00/80SHA

Rear beam bushing, hardness: 80 Sha, outer diameter: 78,8mm, length 86,5mm, quantity per set: 1pcs fits: FORD SCORPIO II 10.94-08.98

View part

MPBS Polyurethane suspension sleeve 2104953-00/90SHA

Polyurethane bushing, hardness: 90 Sha, fits: FORD SCORPIO II 2.0-2.9 10.94-08.98

View part

MPBS Polyurethane suspension sleeve 2104986-00/80SHA

Rear Swingarm bushing, hardness: 80 Sha, outer diameter: 45,3mm, length 67mm, quantity per set: 1pcs fits: FORD SCORPIO II 10.94-08.98

View part

MPBS Polyurethane suspension sleeve 2104986-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45,3mm, length 67mm fits: FORD SCORPIO II 10.94-08.98

View part

MPBS Polyurethane suspension sleeve 2105729-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2105729-00/80SHA/29

Polyurethane stabilizer bushing, 1pcs, L/R, inside, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 2105729-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2105929-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: FORD TRANSIT 01.91-06.00

View part

MPBS Polyurethane suspension sleeve 2105929-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2105948-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 41,2mm, length 91,5mm, quantity per set: 1pcs fits: FORD TRANSIT 09.85-06.00

View part

MPBS Polyurethane suspension sleeve 2105948-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 41,2mm, length 91,5mm fits: FORD TRANSIT 09.85-09.92

View part

MPBS Polyurethane suspension sleeve 2105949-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 52,6mm, length 52mm, quantity per set: 1pcs fits: FORD TRANSIT 01.91-06.00

View part

MPBS Polyurethane suspension sleeve 2105949-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 52,6mm, length 52mm fits: FORD TRANSIT 01.91-03.00

View part

MPBS Polyurethane suspension sleeve 2105992A-00/80SHA

Rear leaf spring bushing (front), hardness: 80 Sha, outer diameter: 57,2mm, length 72mm, quantity per set: 1pcs fits: FORD TRANSIT 01.91-06.00

View part

MPBS Polyurethane suspension sleeve 2105992A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 57,2mm, length 72mm fits: FORD TRANSIT 01.91-03.00

View part

MPBS Polyurethane suspension sleeve 2105992B-00/80SHA

Rear leaf spring bushing (rear), hardness: 80 Sha, outer diameter: 50mm, length 82mm, quantity per set: 1pcs fits: FORD TRANSIT 01.91-06.00

View part

MPBS Polyurethane suspension sleeve 2105992B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 50mm, length 82mm fits: FORD TRANSIT 01.91-03.00

View part

MPBS Polyurethane suspension sleeve 2200502/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2200502/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2200508-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 38mm, length 53mm, quantity per set: 1pcs fits: HONDA ACCORD VII, ACCORD VIII 09.02-06.15

View part

MPBS Polyurethane suspension sleeve 2200508-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38mm, length 53mm, quantity per set: 1pcs fits: HONDA ACCORD VII, ACCORD VIII 09.02-06.15

View part

MPBS Polyurethane suspension sleeve 2200512-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 42mm, length 52mm, quantity per set: 1pcs fits: HONDA ACCORD IV, ACCORD V, ACCORD VI, ACCORD VII, ACCORD VIII, PRELUDE IV 01.90-06.15

View part

MPBS Polyurethane suspension sleeve 2200512-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 42mm, length 52mm, quantity per set: 1pcs fits: HONDA ACCORD IV, ACCORD V, ACCORD VI, ACCORD VII, ACCORD VIII, PRELUDE IV 01.90-06.15

View part

MPBS Polyurethane suspension sleeve 2200515-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 80mm, length 65mm, quantity per set: 1pcs fits: HONDA ACCORD VII 09.02-05.08

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account