Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 2102601-PZ/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2102601-PZ/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2102648-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2102648-00/80SHA/12

Front Swingarm bushing 12mm, hardness: 80 Sha, outer diameter: 38mm, length 65mm, quantity per set: 1pcs fits: VOLVO C30, S40 II, V50 FORD FOCUS I, FOCUS II, FOCUS III MAZDA 3 08.98-

View part

MPBS Polyurethane suspension sleeve 2102648-00/80SHA/14

Front Swingarm bushing 14mm, hardness: 80 Sha, outer diameter: 38mm, length 65mm, quantity per set: 1pcs fits: VOLVO C30, S40 II, V50 FORD FOCUS C-MAX, FOCUS I, FOCUS II, FOCUS III 08.98-02.20

View part

MPBS Polyurethane suspension sleeve 2102648-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2102649-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 57mm, length 58mm, quantity per set: 1pcs, not for RS fits: FORD FOCUS I 08.98-03.05

View part

MPBS Polyurethane suspension sleeve 2102649-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 57mm, length 58mm fits: FORD FOCUS I 08.98-03.05

View part

MPBS Polyurethane suspension sleeve 21027122-00/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 36,3mm, length 45mm, quantity per set: 1pcs fits: VOLVO C30, S40 II, V50 FORD C-MAX, FOCUS C-MAX, FOCUS I, FOCUS II 08.98-02.20

View part

MPBS Polyurethane suspension sleeve 21027122-00/90SHA

Polyurethane suspension sleeve, hardness: 90 Sha, outer diameter: 36,3mm, length 45mm, quantity per set: 1pcs fits: VOLVO C30, S40 II, V50 FORD C-MAX, FOCUS C-MAX, FOCUS I, FOCUS II 08.98-02.20

View part

MPBS Polyurethane suspension sleeve 21027123-00/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 33mm, length 55mm, quantity per set: 1pcs fits: VOLVO C30, S40 II, V50 FORD C-MAX, FOCUS C-MAX, FOCUS I, FOCUS II 08.98-02.20

View part

MPBS Polyurethane suspension sleeve 21027123-00/90SHA

Polyurethane suspension sleeve, hardness: 90 Sha, outer diameter: 33mm, length 55mm, quantity per set: 1pcs fits: VOLVO C30, S40 II, V50 FORD C-MAX, FOCUS C-MAX, FOCUS I, FOCUS II 08.98-02.20

View part

MPBS Polyurethane suspension sleeve 2102716-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 33mm, length 55mm fits: VOLVO C30, S40 II, V50 FORD C-MAX, FOCUS I, FOCUS II, FOCUS III, KUGA I MAZDA 3 08.98-02.20

View part

MPBS Polyurethane suspension sleeve 2102716-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 33mm, length 55mm fits: VOLVO C30, S40 II, V50 FORD C-MAX, FOCUS I, FOCUS II, FOCUS III, KUGA I MAZDA 3 08.98-02.20

View part

MPBS Polyurethane suspension sleeve 21027178-00/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 36,3mm, length 35mm, quantity per set: 1pcs fits: VOLVO C30, S40 II, V40, V50 FORD C-MAX, FOCUS C-MAX, FOCUS I, FOCUS II 08.98-

View part

MPBS Polyurethane suspension sleeve 21027178-00/90SHA

Polyurethane suspension sleeve, hardness: 90 Sha, outer diameter: 36,3mm, length 35mm, quantity per set: 1pcs fits: VOLVO C30, S40 II, V40, V50 FORD C-MAX, FOCUS C-MAX, FOCUS I, FOCUS II 08.98-

View part

MPBS Polyurethane suspension sleeve 2102758-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 32,3mm, length 35mm, quantity per set: 1pcs fits: VOLVO C30, C70 II, S40 II, V40, V50 FORD C-MAX, FOCUS C-MAX, FOCUS I, FOCUS II 08.98-

View part

MPBS Polyurethane suspension sleeve 2102758-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 32,3mm, length 35mm, quantity per set: 1pcs fits: VOLVO C30, C70 II, S40 II, V40, V50 FORD C-MAX, FOCUS C-MAX, FOCUS I, FOCUS II 08.98-

View part

MPBS Polyurethane suspension sleeve 2102849-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 50mm, length 84mm fits: VOLVO C30, C70 II, S40 II, V50 FORD C-MAX, FOCUS C-MAX, FOCUS II, KUGA I MAZDA 3, 5 10.03-06.13

View part

MPBS Polyurethane suspension sleeve 2102849-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 50mm, length 84mm fits: VOLVO C30, C70 II, S40 II, V50 FORD C-MAX, FOCUS C-MAX, FOCUS II, KUGA I MAZDA 3, 5 10.03-06.13

View part

MPBS Polyurethane suspension sleeve 2103548-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 46,7mm, length 46mm, quantity per set: 1pcs fits: FORD ESCORT V, ESCORT VI, FIESTA III, KA 01.89-11.08

View part

MPBS Polyurethane suspension sleeve 2103548-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 46,7mm, length 46mm fits: FORD ESCORT V, ESCORT VI, FIESTA III, KA 01.89-11.08

View part

MPBS Polyurethane suspension sleeve 2103549-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 55mm, length 46mm, quantity per set: 1pcs fits: FORD ESCORT V, ESCORT VI, FIESTA III, KA 01.89-11.08

View part

MPBS Polyurethane suspension sleeve 2103549-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 55mm, length 46mm fits: FORD ESCORT V, ESCORT VI, FIESTA III, KA 01.89-11.08

View part

MPBS Polyurethane suspension sleeve 21040164-00/80SHA

Rear swingarm bushing, hardness: 80 Sha, outer diameter: 60mm, length 45mm, quantity per set: 1pcs fits: FORD MONDEO I, MONDEO II, MONDEO III 01.93-03.07

View part

MPBS Polyurethane suspension sleeve 21040164-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 45mm fits: FORD MONDEO I, MONDEO II, MONDEO III 01.93-03.07

View part

MPBS Polyurethane suspension sleeve 21040166-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40,3/41,3mm, length 45mm fits: FORD GALAXY II, MONDEO IV, S-MAX 05.06-06.15

View part

MPBS Polyurethane suspension sleeve 21040166-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40,3/41,3mm, length 45mm fits: FORD GALAXY II, MONDEO IV, S-MAX 05.06-06.15

View part

MPBS Polyurethane suspension sleeve 2104059-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 37,3/38,3mm, length 55mm fits: FORD COUGAR, GALAXY II, MONDEO I, MONDEO II, MONDEO III, MONDEO IV, S-MAX JAGUAR X-TYPE I 01.93-06.15

View part

MPBS Polyurethane suspension sleeve 2104059-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 37,3/38,3mm, length 55mm fits: FORD COUGAR, GALAXY II, MONDEO I, MONDEO II, MONDEO III, MONDEO IV, S-MAX JAGUAR X-TYPE I 01.93-06.15

View part

MPBS Polyurethane suspension sleeve 21041122-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40mm, length 45mm fits: FORD GALAXY II, MONDEO IV, S-MAX 05.06-06.15

View part

MPBS Polyurethane suspension sleeve 21041122-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 45mm fits: FORD GALAXY II, MONDEO IV, S-MAX 05.06-06.15

View part

MPBS Polyurethane suspension sleeve 21041123-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 37,3/38,4mm, length 54,5mm fits: FORD GALAXY II, MONDEO IV, S-MAX 05.06-06.15

View part

MPBS Polyurethane suspension sleeve 21041123-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 37,3/38,4mm, length 54,5mm fits: FORD GALAXY II, MONDEO IV, S-MAX 05.06-06.15

View part

MPBS Polyurethane suspension sleeve 2104116L-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 90mm, length 191mm fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I, XC70 II FORD GALAXY II, MONDEO IV, S-MAX 03.06-12.18

View part

MPBS Polyurethane suspension sleeve 2104116L-00/CS

Polyurethane bushing, hardness: 75 Sha, outer diameter: 90mm, length 191mm fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I, XC70 II FORD GALAXY II, MONDEO IV, S-MAX 03.06-12.18

View part

MPBS Polyurethane suspension sleeve 2104116LR/80SHA

Polyurethane rear swingarm bushing, hardness: 80 Sha, outer diameter: 90mm, length 191mm, quantity per set: 1pcs fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I, XC70 II 03.06-12.18

View part

MPBS Polyurethane suspension sleeve 2104116LR/CS

Rear swingarm bushing, hardness: 75 Sha, outer diameter: 90mm, length 191mm, quantity per set: 2pcs fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I, XC70 II FORD GALAXY II, MONDEO IV 03.06-12.18

View part

MPBS Polyurethane suspension sleeve 2104116R-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 90mm, length 191mm fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I, XC70 II FORD GALAXY II, MONDEO IV, S-MAX 03.06-12.18

View part

MPBS Polyurethane suspension sleeve 2104116R-00/CS

Polyurethane bushing, hardness: 75 Sha, outer diameter: 90mm, length 191mm fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I, XC70 II FORD GALAXY II, MONDEO IV, S-MAX 03.06-12.18

View part

MPBS Polyurethane suspension sleeve 21041178-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 36,2mm, length 35mm fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I FORD GALAXY II, MONDEO IV, S-MAX 03.06-12.18

View part

MPBS Polyurethane suspension sleeve 21041178-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 36,2mm, length 35mm fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I FORD GALAXY II, MONDEO IV, S-MAX 03.06-12.18

View part

MPBS Polyurethane suspension sleeve 2104148-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 60mm, length 60mm fits: VOLVO S60 II, S80 II, V60 II, V70 II, XC60 I, XC70 II FORD GALAXY II, MONDEO IV, S-MAX 11.99-

View part

MPBS Polyurethane suspension sleeve 2104148-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 60mm fits: VOLVO S60 II, S80 II, V60 II, V70 II, XC60 I, XC70 II FORD GALAXY II, MONDEO IV, S-MAX 11.99-

View part

MPBS Polyurethane suspension sleeve 2104149-00/80SHA

Polyurethane front Swingarm bushing, 4pcs, rear bottom, L/R, hardness: 80 Sha/90 Sha,

View part

MPBS Polyurethane suspension sleeve 2104149-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2104158-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2104158-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 36mm, length 35mm fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC60 I, XC70 II FORD GALAXY II, MONDEO IV, S-MAX 03.06-12.18

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account