Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 2002662-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 42,8mm, length 69mm fits: FIAT PANDA 10.04-

View part

MPBS Polyurethane suspension sleeve 2003601/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2003601/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2003629-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2003629-00/80SHA/18

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 1pcs fits: FIAT CINQUECENTO, SEICENTO / 600 10.94-01.10

View part

MPBS Polyurethane suspension sleeve 2003629-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2003629-00/90SHA/18

Polyurethane stabilizer bushing, hardness: 90 Sha, quantity per set: 1pcs fits: FIAT CINQUECENTO, SEICENTO / 600 10.94-01.10

View part

MPBS Polyurethane suspension sleeve 2003649-00/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 37mm, quantity per set: 1pcs fits: FIAT CINQUECENTO, SEICENTO / 600, UNO 03.83-01.10

View part

MPBS Polyurethane suspension sleeve 2003649-00/90SHA

Polyurethane suspension sleeve, hardness: 90 Sha, outer diameter: 37mm, quantity per set: 1pcs fits: FIAT CINQUECENTO, SEICENTO / 600, UNO 03.83-01.10

View part

MPBS Polyurethane suspension sleeve 2003686-00/80SHA

Rear Swingarm bushing, hardness: 80 Sha, outer diameter: 45mm, length 69mm, quantity per set: 1pcs fits: FIAT CINQUECENTO, SEICENTO / 600 07.91-01.10

View part

MPBS Polyurethane suspension sleeve 2003686-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45mm, length 69mm fits: FIAT CINQUECENTO, SEICENTO / 600 07.91-01.10

View part

MPBS Polyurethane suspension sleeve 2003801/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2003801/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2003802-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2003802-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2003829-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 42mm, quantity per set: 1pcs fits: FIAT STILO 10.01-08.08

View part

MPBS Polyurethane suspension sleeve 2003829-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2003848-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2003848-00/80SHA/12

Front Swingarm bushing 12mm, hardness: 80 Sha, outer diameter: 39mm, length 68mm, quantity per set: 1pcs fits: FIAT BRAVO II, STILO LANCIA DELTA III PEUGEOT BIPPER TEPEE 10.01-

View part

MPBS Polyurethane suspension sleeve 2003848-00/80SHA/14

Front Swingarm bushing 14mm, hardness: 80 Sha, outer diameter: 39mm, length 68mm, quantity per set: 1pcs fits: FIAT BRAVO II, STILO LANCIA DELTA III 10.01-12.16

View part

MPBS Polyurethane suspension sleeve 2003848-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2003849-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 60mm, length 65mm, quantity per set: 1pcs fits: FIAT BRAVO II, STILO LANCIA DELTA III 10.01-12.16

View part

MPBS Polyurethane suspension sleeve 2003849-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 65mm fits: FIAT BRAVO II, STILO LANCIA DELTA III 10.01-12.16

View part

MPBS Polyurethane suspension sleeve 2003853-00/80SHA

Rear beam bushing, hardness: 80 Sha, outer diameter: 68mm, length 100mm, quantity per set: 1pcs fits: FIAT 500L, BRAVO II, LINEA, STILO LANCIA DELTA III 10.01-

View part

MPBS Polyurethane suspension sleeve 2003853-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 68mm, length 100mm fits: FIAT 500L, BRAVO, BRAVO II, LINEA, STILO LANCIA DELTA III 10.01-

View part

MPBS Polyurethane suspension sleeve 2004149-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 70mm, length 66mm fits: FIAT 500X, TIPO JEEP COMPASS 09.14-

View part

MPBS Polyurethane suspension sleeve 2004149-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 70mm, length 66mm fits: FIAT 500X, TIPO JEEP COMPASS 09.14-

View part

MPBS Polyurethane suspension sleeve 2004448-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 56,6mm, length 64mm, quantity per set: 1pcs fits: CITROEN JUMPER III FIAT DUCATO PEUGEOT BOXER 04.06-

View part

MPBS Polyurethane suspension sleeve 2004448-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 56,6mm, length 64mm fits: CITROEN JUMPER III FIAT DUCATO PEUGEOT BOXER 04.06-

View part

MPBS Polyurethane suspension sleeve 2004449-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 74mm, length 76,5mm, quantity per set: 1pcs fits: CITROEN JUMPER III FIAT DUCATO MITSUBISHI ASX, LANCER VIII 04.06-

View part

MPBS Polyurethane suspension sleeve 2004449-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 74mm, length 76,5mm fits: CITROEN JUMPER III FIAT DUCATO PEUGEOT BOXER 04.06-

View part

MPBS Polyurethane suspension sleeve 2100249-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 61mm, length 52mm fits: FORD B-MAX, FIESTA VI, KA+ III, TOURNEO COURIER B460, TRANSIT COURIER B460 07.07-12.23

View part

MPBS Polyurethane suspension sleeve 2100249-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 61mm, length 52mm fits: FORD B-MAX, FIESTA VI, KA+ III, TOURNEO COURIER B460, TRANSIT COURIER B460 07.07-12.23

View part

MPBS Polyurethane suspension sleeve 2101516-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 50,6mm, length 219mm, quantity per set: 1pcs fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 01.10-

View part

MPBS Polyurethane suspension sleeve 2101516-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 50,6mm, length 219mm, quantity per set: 1pcs fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 01.10-

View part

MPBS Polyurethane suspension sleeve 2102401/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2102429-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2102429-00/80SHA/18

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36,5mm, quantity per set: 1pcs fits: FORD FIESTA V, FUSION MAZDA 2 11.01-12.12

View part

MPBS Polyurethane suspension sleeve 2102429-00/80SHA/19

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36,5mm, quantity per set: 1pcs fits: FORD FIESTA V, FUSION MAZDA 2 11.01-12.12

View part

MPBS Polyurethane suspension sleeve 2102429-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 2102448-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 40mm, length 55mm, quantity per set: 1pcs fits: FORD FIESTA V, FUSION MAZDA 2 11.01-12.12

View part

MPBS Polyurethane suspension sleeve 2102448-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 55mm fits: FORD FIESTA V, FUSION MAZDA 2 11.01-12.12

View part

MPBS Polyurethane suspension sleeve 2102449-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 57mm, length 65mm, quantity per set: 1pcs fits: FORD FIESTA V, FUSION MAZDA 2 11.01-12.12

View part

MPBS Polyurethane suspension sleeve 2102449-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 57mm, length 65mm fits: FORD FIESTA V, FUSION MAZDA 2 11.01-12.12

View part

MPBS Polyurethane suspension sleeve 2102453-00/80SHA

Rear beam bushing, hardness: 80 Sha, outer diameter: 58mm, length 70mm, quantity per set: 1pcs fits: FORD FIESTA V, FUSION MAZDA 2 11.01-12.12

View part

MPBS Polyurethane suspension sleeve 2102453-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 58mm, length 70mm fits: FORD FIESTA V, FUSION MAZDA 2 11.01-12.12

View part

MPBS Polyurethane suspension sleeve 2102548-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 38,2mm, length 53,5mm fits: FORD FIESTA VII, PUMA 05.17-

View part

MPBS Polyurethane suspension sleeve 2102548-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38,2mm, length 53,5mm fits: FORD FIESTA VII, PUMA 05.17-

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account