Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 1400653-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 61,3mm, length 67,5mm fits: CITROEN C2, C3 I PEUGEOT 1007 02.02-

View part

MPBS Polyurethane suspension sleeve 1400748-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 55,3mm, length 48mm, quantity per set: 1pcs fits: CITROEN C2, C3 I, C3 PLURIEL PEUGEOT 1007 02.02-

View part

MPBS Polyurethane suspension sleeve 1400748-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 55,3mm, length 48mm fits: CITROEN C2, C3 I, C3 PLURIEL PEUGEOT 1007 02.02-

View part

MPBS Polyurethane suspension sleeve 1400749-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 55,3mm, length 48mm, quantity per set: 1pcs fits: CITROEN C2, C3 I, C3 PLURIEL PEUGEOT 1007 02.02-

View part

MPBS Polyurethane suspension sleeve 1400749-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 55,3mm, length 48mm fits: CITROEN C2, C3 I, C3 PLURIEL PEUGEOT 1007 02.02-

View part

MPBS Polyurethane suspension sleeve 1401302/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1401302/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1401329-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1401329-00/80SHA/23

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 45mm, quantity per set: 1pcs fits: CITROEN C5 I, C5 II 03.01-09.08

View part

MPBS Polyurethane suspension sleeve 1401329-00/80SHA/24

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 45mm, quantity per set: 1pcs fits: CITROEN C5 I, C5 II 03.01-09.08

View part

MPBS Polyurethane suspension sleeve 1401329-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1401348-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 40,4mm, length 38mm, quantity per set: 1pcs fits: CITROEN C5 I, C5 II 03.01-09.08

View part

MPBS Polyurethane suspension sleeve 1401348-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40,4mm, length 38mm fits: CITROEN C5 I, C5 II 03.01-09.08

View part

MPBS Polyurethane suspension sleeve 1401349-45-00/80SHA

Front Swingarm bushing (rear) 45mm, hardness: 80 Sha, outer diameter: 45mm, length 42mm, quantity per set: 1pcs fits: CITROEN C5 I, C5 II 03.01-09.08

View part

MPBS Polyurethane suspension sleeve 1401349-45-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45mm, length 42mm fits: CITROEN C5 I, C5 II, C5 III, C6 03.01-05.17

View part

MPBS Polyurethane suspension sleeve 1401349-50-00/80SHA

Front Swingarm bushing (rear) 50mm, hardness: 80 Sha, outer diameter: 50mm, length 42mm, quantity per set: 1pcs fits: CITROEN C5 I, C5 II 03.01-09.08

View part

MPBS Polyurethane suspension sleeve 1401349-50-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 50mm, length 42mm fits: CITROEN C5 I, C5 II, C5 III, C6 03.01-05.17

View part

MPBS Polyurethane suspension sleeve 1402538-00/65SHA

Polyurethane engine pad, 1pcs, L, hardness: 65 Sha,

View part

MPBS Polyurethane suspension sleeve 1402538-00/80SHA

Polyurethane engine pad, 1pcs, L, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 1402538-00/90SHA

Polyurethane engine pad, 1pcs, L, hardness: 90 Sha,

View part

MPBS Polyurethane suspension sleeve 1402539-00/80SHA

Engine mount, 1pcs, engine, L,

View part

MPBS Polyurethane suspension sleeve 1402539-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1402548-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 34mm, length 48mm, quantity per set: 1pcs fits: CITROEN AX, SAXO OPEL ASTRA F PEUGEOT 106 I, 106 II 07.86-07.04

View part

MPBS Polyurethane suspension sleeve 1402548-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 34mm, length 48mm fits: CITROEN AX 07.86-12.98

View part

MPBS Polyurethane suspension sleeve 1402549-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 38mm, length 84mm, quantity per set: 1pcs fits: CITROEN AX, SAXO OPEL ASTRA F, ASTRA F CLASSIC, VECTRA A PEUGEOT 106 I 07.86-07.04

View part

MPBS Polyurethane suspension sleeve 1402549-00/90SHA

Polyurethane bushing, hardness: 90 Sha, length 84mm fits: CITROEN AX, SAXO PEUGEOT 106 I, 106 II 07.86-07.04

View part

MPBS Polyurethane suspension sleeve 1402553-00/80SHA

Rear beam bushing, hardness: 80 Sha, outer diameter: 33mm, length 47mm, quantity per set: 1pcs fits: CITROEN AX, SAXO PEUGEOT 106 I, 106 II 07.86-07.04

View part

MPBS Polyurethane suspension sleeve 1402553-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 33mm, length 47mm fits: CITROEN AX, SAXO PEUGEOT 106 I, 106 II 07.86-07.04

View part

MPBS Polyurethane suspension sleeve 1402948-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 33,3mm, length 31mm, quantity per set: 1pcs fits: CITROEN BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, XSARA, ZX PEUGEOT 306 03.91-12.15

View part

MPBS Polyurethane suspension sleeve 1402948-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 33,3mm, length 31mm fits: CITROEN BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, XSARA, ZX PEUGEOT 306 03.91-12.15

View part

MPBS Polyurethane suspension sleeve 1403348-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 43,3mm, length 59,5mm fits: CITROEN C4 GRAND PICASSO II, C4 PICASSO II, C4 SPACETOURER, C5 AIRCROSS, GRAND C4 SPACETOURER 02.13-

View part

MPBS Polyurethane suspension sleeve 1403348-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 43,3mm, length 59,5mm fits: CITROEN C4 GRAND PICASSO II, C4 PICASSO II, C4 SPACETOURER, C5 AIRCROSS, GRAND C4 SPACETOURER 02.13-

View part

MPBS Polyurethane suspension sleeve 1403348/CS

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1403349-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 50,3mm, length 65mm fits: CITROEN C4 GRAND PICASSO II, C4 PICASSO II, C4 SPACETOURER, C5 I, C5 II, C5 III, C6, GRAND C4 SPACETOURER 03.01-

View part

MPBS Polyurethane suspension sleeve 1403349-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 50,3mm, length 65mm fits: CITROEN C4 GRAND PICASSO II, C4 PICASSO II, C4 SPACETOURER, C5 I, C5 II, C5 III, C6, GRAND C4 SPACETOURER 03.01-

View part

MPBS Polyurethane suspension sleeve 1403349/CS

Polyurethane bushing, 1pcs, front rear swingarm, L/R, hardness: 70 Sha/75 Sha, fits: CITROEN C4 GRAND PICASSO II, C4 PICASSO II, C4 SPACETOURER, C5 AIRCROSS, GRAND C4 SPACETOURER 1.2-Electric 02.13-

View part

MPBS Polyurethane suspension sleeve 1500104-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 37mm, length 46mm, quantity per set: 1pcs fits: DACIA DOKKER, DOKKER FURGON/NADWOZIE WIELKOPRZESTRZENNE, LODGY, LOGAN, LOGAN EXPRESS 08.04-

View part

MPBS Polyurethane suspension sleeve 1500104-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 37mm, length 46mm fits: DACIA DOKKER FURGON/NADWOZIE WIELKOPRZESTRZENNE, LODGY, LOGAN, LOGAN II, SANDERO, SANDERO II 08.04-

View part

MPBS Polyurethane suspension sleeve 1500129-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 37mm, quantity per set: 1pcs fits: DACIA DOKKER, DOKKER FURGON/NADWOZIE WIELKOPRZESTRZENNE, LODGY, LOGAN, LOGAN EXPRESS 09.04-

View part

MPBS Polyurethane suspension sleeve 1500129-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1500153-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1500153-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1500304-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 37mm, length 46mm, quantity per set: 1pcs fits: DACIA DUSTER 04.10-

View part

MPBS Polyurethane suspension sleeve 1500304-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 37mm, length 46mm fits: DACIA DUSTER 04.10-

View part

MPBS Polyurethane suspension sleeve 1600549-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 56mm, quantity per set: 1pcs fits: DAEWOO LANOS 02.97-

View part

MPBS Polyurethane suspension sleeve 1600549-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1600551-00/60SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1600551-00/80SHA

Muffler hanger, hardness: 80 Sha, quantity per set: 1pcs fits: DAEWOO LANOS, LEGANZA, NUBIRA HONDA CIVIC III, CIVIC VI, CRX I, INTEGRA ROVER 100 / METRO 10.83-

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account