Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 1300229-00/80SHA/25

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 42mm, quantity per set: 1pcs fits: CHRYSLER 300M, CONCORDE 10.97-09.04

View part

MPBS Polyurethane suspension sleeve 1300229-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300230-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300230-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300231-00/80SHA

Control rod bushings, hardness: 80 Sha, outer diameter: 56mm, quantity per set: 1pcs fits: CHRYSLER 300M, CONCORDE 10.97-09.04

View part

MPBS Polyurethane suspension sleeve 1300231-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300266-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 35,2mm, quantity per set: 1pcs fits: CHRYSLER 300M 07.98-09.04

View part

MPBS Polyurethane suspension sleeve 1300266-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300269-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 32,5mm, quantity per set: 1pcs fits: CHRYSLER 300M 07.98-09.04

View part

MPBS Polyurethane suspension sleeve 1300269-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300314-00/80SHA

Rear transverse Swingarm bushing (front), hardness: 80 Sha, outer diameter: 38,5mm, quantity per set: 1pcs fits: CHRYSLER NEON II DODGE NEON II 08.99-

View part

MPBS Polyurethane suspension sleeve 1300314-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300314-15/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300314-15/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300315-00/80SHA

Rear transverse Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 44,5mm, quantity per set: 1pcs fits: CHRYSLER NEON II DODGE NEON II 08.99-

View part

MPBS Polyurethane suspension sleeve 1300315-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300402/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300402/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300409-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 66,6mm, length 78mm, quantity per set: 1pcs, no 4x4 fits: CHRYSLER 300C DODGE CHALLENGER, CHARGER 09.07-

View part

MPBS Polyurethane suspension sleeve 1300409-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 66,6mm, length 78mm, quantity per set: 1pcs, no 4x4 fits: CHRYSLER 300C DODGE CHALLENGER, CHARGER 09.07-

View part

MPBS Polyurethane suspension sleeve 13004171-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 50,6mm, length 60mm, quantity per set: 1pcs fits: CHRYSLER 300C DODGE CHARGER LANCIA THEMA 09.04-

View part

MPBS Polyurethane suspension sleeve 13004171-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 50,6mm, length 60mm, quantity per set: 1pcs fits: CHRYSLER 300C DODGE CHARGER LANCIA THEMA 09.04-

View part

MPBS Polyurethane suspension sleeve 1300448-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 66,7mm, length 78mm, quantity per set: 1pcs fits: CHRYSLER 300C DODGE CHALLENGER 09.04-

View part

MPBS Polyurethane suspension sleeve 1300448-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 66,7mm, length 78mm fits: CHRYSLER 300C DODGE CHALLENGER 09.04-12.23

View part

MPBS Polyurethane suspension sleeve 13005154-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 25mm, length 44mm, quantity per set: 1pcs fits: CHRYSLER VOYAGER II, VOYAGER III, VOYAGER IV 08.90-12.08

View part

MPBS Polyurethane suspension sleeve 13005154-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 25mm, length 44mm, quantity per set: 1pcs fits: CHRYSLER VOYAGER II, VOYAGER III, VOYAGER IV 08.90-12.08

View part

MPBS Polyurethane suspension sleeve 1300548-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 39,3mm, length 68mm fits: CHRYSLER PACIFICA, VOYAGER III, VOYAGER IV 01.95-09.08

View part

MPBS Polyurethane suspension sleeve 1300548-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 39,3mm, length 68mm fits: CHRYSLER PACIFICA, VOYAGER III, VOYAGER IV 01.95-09.08

View part

MPBS Polyurethane suspension sleeve 1400329-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1400329-00/80SHA/17

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 47mm, quantity per set: 1pcs fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, XSARA, ZX 03.91-12.15

View part

MPBS Polyurethane suspension sleeve 1400329-00/80SHA/19

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 47mm, quantity per set: 1pcs fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, XSARA, ZX 03.91-12.15

View part

MPBS Polyurethane suspension sleeve 1400329-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 47mm, quantity per set: 1pcs fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, XSARA, ZX 03.91-12.15

View part

MPBS Polyurethane suspension sleeve 1400329-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1400501-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1400501/80SHA

Polyurethane bushing, hardness: 80 Sha fits: CITROEN C1, C1 II PEUGEOT 107, 108 TOYOTA AYGO 06.05-

View part

MPBS Polyurethane suspension sleeve 1400502/80SHA

Polyurethane bushing, hardness: 80 Sha fits: CITROEN C1, C1 II PEUGEOT 107, 108 TOYOTA AYGO 06.05-

View part

MPBS Polyurethane suspension sleeve 1400502/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1400529-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1400529-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1400533-00/80SHA

Polyurethane bushing fits: CITROEN C1, C2 PEUGEOT 107, 108 TOYOTA AYGO 07.03-

View part

MPBS Polyurethane suspension sleeve 1400533-00/90SHA

Polyurethane bushing fits: CITROEN C1, C2 PEUGEOT 107, 108 TOYOTA AYGO 07.03-

View part

MPBS Polyurethane suspension sleeve 1400548-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 33,5mm, length 53mm fits: CITROEN C1, C1 II PEUGEOT 107, 108 06.05-

View part

MPBS Polyurethane suspension sleeve 1400548-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 33,5mm, length 53mm fits: CITROEN C1, C1 II PEUGEOT 107, 108 06.05-

View part

MPBS Polyurethane suspension sleeve 1400549-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 57,3mm, length 62,5mm fits: CITROEN C1, C1 II PEUGEOT 107, 108 TOYOTA AYGO 06.05-

View part

MPBS Polyurethane suspension sleeve 1400549-00/90SHA

Polyurethane bushing, transverse track control arm, hardness: 90 Sha, fits: CITROEN C1, C1 II PEUGEOT 107, 108 TOYOTA AYGO 1.0/1.2/1.4D 06.05-

View part

MPBS Polyurethane suspension sleeve 1400553-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 60mm, length 85mm fits: CITROEN C1, C1 II PEUGEOT 107, 108 TOYOTA AYGO 06.05-

View part

MPBS Polyurethane suspension sleeve 1400553-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 85mm fits: CITROEN C1, C1 II PEUGEOT 107, 108 TOYOTA AYGO 06.05-

View part

MPBS Polyurethane suspension sleeve 1400653-00/80SHA

Rear beam bushing, hardness: 80 Sha, outer diameter: 61,3mm, length 67,5mm, quantity per set: 1pcs fits: CITROEN C2, C3 I PEUGEOT 1007 02.02-

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account