Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 0805153-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 64mm fits: BMW 1502-2002 (E10) 09.67-07.77

View part

MPBS Polyurethane suspension sleeve 0805189-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 37,5mm, quantity per set: 2pcs fits: BMW 1502-2002 (E10) 09.67-07.77

View part

MPBS Polyurethane suspension sleeve 0805189-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0805202/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0805202/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0805209-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 46,3mm, length 54mm fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (F30, F80), 3 (F31), 3 GRAN TURISMO (F34), 4 (F33, F83) 07.11-

View part

MPBS Polyurethane suspension sleeve 0805209-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 46,3mm, length 54mm fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (F30, F80), 3 (F31), 3 GRAN TURISMO (F34), 4 (F33, F83) 07.11-

View part

MPBS Polyurethane suspension sleeve 0805209/CS

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0805248-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 70,3mm, length 95mm, quantity per set: 1pcs fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (F30, F80), 3 (F31) 07.11-

View part

MPBS Polyurethane suspension sleeve 0805248-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 70,3mm, length 95mm, quantity per set: 1pcs fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (F30, F80), 3 (F31) 07.11-

View part

MPBS Polyurethane suspension sleeve 0805248X-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 70,4mm, length 80mm fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (F30, F80), 3 (F31), 3 GRAN TURISMO (F34), 4 (F32, F82) 01.12-

View part

MPBS Polyurethane suspension sleeve 0805248X-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 70,4mm, length 80mm fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (F30, F80), 3 (F31), 3 GRAN TURISMO (F34), 4 (F32, F82) 01.12-

View part

MPBS Polyurethane suspension sleeve 0805248X/CS

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0805309-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 56,3mm, length 70,5mm, quantity per set: 1pcs fits: BMW X3 (G01), X3 (G01, F97, G08), X4 (G02, F98) 08.17-

View part

MPBS Polyurethane suspension sleeve 0805309-00/90SHA

Front Swingarm bushing (rear), hardness: 90 Sha, outer diameter: 56,3mm, length 70,5mm, quantity per set: 1pcs fits: BMW X3 (G01), X3 (G01, F97, G08), X4 (G02, F98) 08.17-

View part

MPBS Polyurethane suspension sleeve 0805348-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 73,5mm, length 84,5mm, quantity per set: 1pcs fits: BMW 3 (G20, G80, G28), 3 (G21), 3 (G21, G81), 4 (G22, G82), 4 (G23 08.17-

View part

MPBS Polyurethane suspension sleeve 0805348-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 73,5mm, length 84,5mm, quantity per set: 1pcs fits: BMW 3 (G20, G80, G28), 3 (G21), 3 (G21, G81), 4 (G22, G82), 4 (G23 08.17-

View part

MPBS Polyurethane suspension sleeve 0805404-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 70,4mm, length 85,5mm fits: BMW 5 (G30, F90), 5 (G31) 09.16-

View part

MPBS Polyurethane suspension sleeve 0805404-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 70,4mm, length 85,5mm fits: BMW 5 (G30, F90), 5 (G31) 09.16-

View part

MPBS Polyurethane suspension sleeve 0805404-00/CS

Polyurethane bushing, hardness: 75 Sha, outer diameter: 70,4mm, length 85,5mm fits: BMW 5 (G30, F90), 5 (G31) 09.16-

View part

MPBS Polyurethane suspension sleeve 0805413-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 56,3mm, length 71mm fits: BMW 5 (G30, F90), 6 GRAN TURISMO (G32), 7 (G11, G12), X5 (G05, F95), X6 (G06, F96), X7 (G07) 07.15-

View part

MPBS Polyurethane suspension sleeve 0805413-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 56,3mm, length 71mm fits: BMW 5 (G30, F90), 6 GRAN TURISMO (G32), 7 (G11, G12), X5 (G05, F95), X6 (G06, F96), X7 (G07) 07.15-

View part

MPBS Polyurethane suspension sleeve 0805430-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0805430-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0805504-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 75,5mm, length 90mm fits: BMW X5 (G05), X5 (G05, F95), X6 (G06, F96), X7 (G07) 08.18-

View part

MPBS Polyurethane suspension sleeve 0805504-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 75,5mm, length 90mm fits: BMW 4 (G23, G83), X5 (G05), X5 (G05, F95), X6 (G06, F96), X7 (G07) 08.18-

View part

MPBS Polyurethane suspension sleeve 0805504/CS

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0805604-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 75mm, length 85mm fits: BMW 3 (G20, G80, G28), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83), 4 GRAN COUPE (G26) 11.18-

View part

MPBS Polyurethane suspension sleeve 0805604-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 75mm, length 85mm fits: BMW 3 (G20, G80, G28), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83), 4 GRAN COUPE (G26) 11.18-

View part

MPBS Polyurethane suspension sleeve 0805609-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 50,6mm, length 75,5mm fits: BMW 3 (G20, G80, G28), 3 (G21), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83), 4 GRAN COUPE (G26) 11.18-

View part

MPBS Polyurethane suspension sleeve 0805609-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 50,6mm, length 75,5mm fits: BMW 3 (G20, G80, G28), 3 (G21), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83), 4 GRAN COUPE (G26) 11.18-

View part

MPBS Polyurethane suspension sleeve 0805609/CS

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0805704-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 75,5mm, length 85mm fits: BMW 6 GRAN TURISMO (G32), 7 (G11, G12) 07.15-

View part

MPBS Polyurethane suspension sleeve 0805704-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 75,5mm, length 85mm fits: BMW 6 GRAN TURISMO (G32), 7 (G11, G12) 07.15-

View part

MPBS Polyurethane suspension sleeve 0805704/CS

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300149-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 60mm, length 90mm fits: CHRYSLER PACIFICA, VOYAGER III, VOYAGER IV 01.95-09.08

View part

MPBS Polyurethane suspension sleeve 1300149-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 90mm fits: CHRYSLER PACIFICA, VOYAGER III, VOYAGER IV 01.95-09.08

View part

MPBS Polyurethane suspension sleeve 1300201/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300201/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300202/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300204-00/80SHA

Front Swingarm bushing (outer), hardness: 80 Sha, outer diameter: 42,5mm, length 64,2mm, quantity per set: 1pcs fits: CHRYSLER 300M, CONCORDE, NEW YORKER FORD USA WINDSTAR 09.92-09.04

View part

MPBS Polyurethane suspension sleeve 1300204-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 42,5mm, length 64,2mm fits: CHRYSLER 300M, CONCORDE, NEW YORKER FORD USA WINDSTAR 09.92-09.04

View part

MPBS Polyurethane suspension sleeve 1300206-00/80SHA

Front Swingarm bushing (Inner), hardness: 80 Sha, outer diameter: 38mm, length 60mm, quantity per set: 1pcs fits: CHRYSLER 300M, CONCORDE 10.92-09.04

View part

MPBS Polyurethane suspension sleeve 1300206-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38mm, length 60mm fits: CHRYSLER 300M 07.98-09.04

View part

MPBS Polyurethane suspension sleeve 13002112-00/80SHA

Steering rod sleeve, 1pcs, Tie rod, L/R, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 13002164-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 44,2mm, quantity per set: 1pcs fits: CHRYSLER 300M 07.98-09.04

View part

MPBS Polyurethane suspension sleeve 13002164-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 1300229-00/80SHA

Polyurethane bushing,

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account