Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 0800932/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 29mm, quantity per set: 1pcs fits: BMW 3 (E30), 3 (E36), 5 (E34), 7 (E32), Z3 (E36) 09.82-06.03

View part

MPBS Polyurethane suspension sleeve 0800933-00/80SHA

Rubber ring for stabilizing bar, hardness: 80 Sha, quantity per set: 1pcs fits: BMW 3 (E30), 3 (E36), 5 (E34), 7 (E32), Z1, Z3 (E36) 09.82-06.03

View part

MPBS Polyurethane suspension sleeve 0800933-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0800933/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 29mm, quantity per set: 1pcs fits: BMW 3 (E30), 3 (E36), 5 (E34), 7 (E32), Z3 (E36) 09.82-06.03

View part

MPBS Polyurethane suspension sleeve 0800953-00/80SHA

Rear beam bushings, hardness: 80 Sha, outer diameter: 58,8mm, length 84mm, quantity per set: 2pcs fits: BMW 3 (E36), Z3 (E36) 01.94-06.03

View part

MPBS Polyurethane suspension sleeve 0800953-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 58,8mm, length 84mm fits: BMW 3 (E36), Z3 (E36) 01.94-06.03

View part

MPBS Polyurethane suspension sleeve 0800953COM-00/80SHA

Polyurethane bushing, hardness: 80 Sha, quantity per set: 2pcs fits: BMW 3 (E36), Z3 (E36) 01.94-06.03

View part

MPBS Polyurethane suspension sleeve 0800979-00/80SHA

Rear differential gear pad, hardness: 80 Sha, outer diameter: 85mm, length 95mm, quantity per set: 1pcs fits: BMW 3 (E30), 3 (E36), Z3 (E36) 09.82-06.03

View part

MPBS Polyurethane suspension sleeve 0800979-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 85mm, length 95mm fits: BMW 3 (E30), 3 (E36), Z3 (E36) 09.82-06.03

View part

MPBS Polyurethane suspension sleeve 0800986-00/80SHA

Rear Swingarm bushings, hardness: 80 Sha, outer diameter: 27,6mm, length 69mm, quantity per set: 4pcs fits: BMW 3 (E21), 3 (E30), 3 (E36), 5 (E12), Z3 (E36) 03.72-06.03

View part

MPBS Polyurethane suspension sleeve 0800986-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 27,6mm, length 69mm fits: BMW 3 (E21), 3 (E30), 3 (E36), 5 (E12), Z3 (E36) 03.72-01.03

View part

MPBS Polyurethane suspension sleeve 0801101-CD/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801101-CD/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801101-X/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801101-X/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801103-CD/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801103-CD/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801104-A-00/80SHA

Front lower Swingarm bushing (rear) 66mm, hardness: 80 Sha, outer diameter: 66,6mm, length 32,6mm, quantity per set: 2pcs, acentric fits: BMW 3 (E46), Z4 (E85), Z4 (E86) 12.97-02.09

View part

MPBS Polyurethane suspension sleeve 0801104-A-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801104-SYM-00/80SHA

Front lower Swingarm bushing (centric) 66mm, hardness: 80 Sha, outer diameter: 66,6mm, length 32,6mm, quantity per set: 2pcs, centric fits: BMW 3 (E46), Z4 (E85), Z4 (E86) 12.97-02.09

View part

MPBS Polyurethane suspension sleeve 0801104-SYM-00/90SHA

Polyurethane front Swingarm bushing, 2pcs, front, L/R, bottom, hardness: 90 Sha, centric

View part

MPBS Polyurethane suspension sleeve 0801104-X-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 66,6mm, length 48mm, quantity per set: 2pcs fits: BMW 3 (E46) 01.00-05.05

View part

MPBS Polyurethane suspension sleeve 0801104-X-00/90SHA

Front Swingarm bushing (rear), hardness: 90 Sha, quantity per set: 2pcs fits: BMW 3 (E46), 5 (E34) 10.91-05.05

View part

MPBS Drive shaft flexible joint 08011105A-00/80SHA

Propeller shaft elastic coupling front (outer diameter 110mm) fits: BMW 3 (E30), 3 (E36), 3 (E46), 5 (E60) 1.6-4.4 09.82-03.10

View part

MPBS Drive shaft flexible joint 08011105A-00/90SHA

Propeller shaft elastic coupling front fits: BMW 3 (E30), 3 (E36), 3 (E46), 5 (E60) 1.6-4.4 09.82-03.10

View part

MPBS Drive shaft flexible joint 08011105B-00/80SHA

Propeller shaft elastic coupling fits: BMW 3 (E30), 3 (E36), 3 (E46), 5 (E60) 09.82-03.10

View part

MPBS Drive shaft flexible joint 08011105B-00/90SHA

Propeller shaft elastic coupling front (polyurethane) fits: BMW 3 (E30), 3 (E36), 3 (E46), 5 (E28), 5 (E34), 5 (E39), 5 (E60) 1.6-4.9 05.81-03.10

View part

MPBS Polyurethane suspension sleeve 08011110-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 08011110-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801129-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801129-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 54mm, quantity per set: 2pcs fits: BMW 3 (E46), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E39) 09.95-12.13

View part

MPBS Polyurethane suspension sleeve 0801129-00/80SHA/23

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 54mm, quantity per set: 2pcs fits: BMW 3 (E46), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E39) 09.95-12.13

View part

MPBS Polyurethane suspension sleeve 0801129-00/80SHA/24

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 54mm, quantity per set: 2pcs fits: BMW 5 (E39) 09.95-05.04

View part

MPBS Polyurethane suspension sleeve 0801129-00/80SHA/25

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 54mm, quantity per set: 2pcs fits: BMW 3 (E46), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E39) 09.95-12.13

View part

MPBS Polyurethane suspension sleeve 0801129-00/80SHA/26

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 54mm, quantity per set: 2pcs fits: BMW 3 (E46), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E39) 09.95-12.13

View part

MPBS Polyurethane suspension sleeve 0801129-00/80SHA/30

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 54mm, quantity per set: 2pcs fits: BMW 3 (E46), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E39) 09.95-12.13

View part

MPBS Polyurethane suspension sleeve 0801129-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801129-00/90SHA/24

Polyurethane stabilizer bushing, hardness: 90 Sha, outer diameter: 54mm, quantity per set: 2pcs fits: BMW 5 (E39) 09.95-05.04

View part

MPBS Polyurethane suspension sleeve 0801140A-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 52mm, quantity per set: 1pcs fits: BMW 5 (E34), 7 (E32), 8 (E31) 04.92-06.99

View part

MPBS Polyurethane suspension sleeve 0801140A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 52mm, quantity per set: 1pcs fits: BMW 5 (E34), 7 (E32), 8 (E31) 04.92-06.99

View part

MPBS Polyurethane suspension sleeve 0801140B-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 52mm, quantity per set: 1pcs, thread M10 fits: BMW 5 (E34), 7 (E32), 8 (E31) 04.92-06.99

View part

MPBS Polyurethane suspension sleeve 0801140B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 52mm, quantity per set: 1pcs, thread M10 fits: BMW 5 (E34), 7 (E32), 8 (E31) 04.92-06.99

View part

MPBS Polyurethane suspension sleeve 0801151-00/80SHA

Muffler hanger, hardness: 80 Sha, outer diameter: 93mm, quantity per set: 1pcs fits: BMW 3 (E46) 12.97-12.07

View part

MPBS Polyurethane suspension sleeve 0801151-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801153A-00/80SHA

Rear trolley bushings (front), hardness: 80 Sha, outer diameter: 71mm, length 58mm, quantity per set: 1pcs fits: BMW 3 (E46), X3 (E83), Z4 (E85), Z4 (E86) 12.97-12.11

View part

MPBS Polyurethane suspension sleeve 0801153A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 71mm, length 58mm fits: BMW 3 (E46), X3 (E83) 12.97-12.11

View part

MPBS Polyurethane suspension sleeve 0801153AB/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801153AB/90SHA

Polyurethane bushing,

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account