Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 0801153B-00/80SHA

Rear trolley bushings (rear), hardness: 80 Sha, outer diameter: 74mm, length 61mm, quantity per set: 1pcs fits: BMW 3 (E46), Z4 (E85), Z4 (E86) 12.97-02.09

View part

MPBS Polyurethane suspension sleeve 0801153B-00/90SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 74mm, length 61mm fits: BMW 3 (E46), X3 (E83), Z4 (E85), Z4 (E86) 12.97-12.11

View part

MPBS Polyurethane suspension sleeve 0801153CD/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 74mm, length 61mm fits: BMW 3 (E46), X3 (E83), Z4 (E85), Z4 (E86) 12.97-12.11

View part

MPBS Polyurethane suspension sleeve 0801153CD/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801179-00/80SHA

Axle suspension bushing, hardness: 80 Sha, outer diameter: 68,8mm, length 61mm, quantity per set: 1pcs fits: BMW 3 (E46), X3 (E83) 12.97-08.07

View part

MPBS Polyurethane suspension sleeve 0801179-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 68,8mm, length 61mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E46), 3 (E90), 3 (E91) 12.97-

View part

MPBS Polyurethane suspension sleeve 0801179-00/CS

Rear differential gear bushing fits: BMW 3 (E46) 12.97-05.05

View part

MPBS Polyurethane suspension sleeve 0801601/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801601/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801601X/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801601X/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801602/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801602/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801603/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801603/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801609-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 46,4mm, length 70mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84), Z4 (E89) 06.04-08.16

View part

MPBS Polyurethane suspension sleeve 0801609-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 46,4mm, length 70mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84), Z4 (E89) 06.04-08.16

View part

MPBS Polyurethane suspension sleeve 08016123-00/80SHA

Polyurethane bushing,

View part

MPBS Wheel suspension track control arm, rear 08016123-00/90SHA

Rear axle track control arm (bottom/inner) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 2 (F22, F87), 3 (E90), 3 (E91), 3 (E92), 3 (E93) 1.5-4.4 06.04-06.21

View part

MPBS Polyurethane suspension sleeve 08016173/80SHA

Polyurethane bushing,

View part

MPBS Wheel suspension track control arm, rear 08016173/90SHA

Rear axle track control arm (rear) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93) 1.6-4.4 06.04-12.13

View part

MPBS Polyurethane suspension sleeve 08016176-00/80SHA

Shock absorber upper mount, hardness: 80 Sha, length 111,5mm, quantity per set: 1pcs fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84) 06.04-06.15

View part

MPBS Polyurethane suspension sleeve 08016176-00/90SHA

Shock absorber upper mount, hardness: 90 Sha, length 111,5mm, quantity per set: 1pcs fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84) 06.04-06.15

View part

MPBS Polyurethane suspension sleeve 0801619-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801619-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45mm, length 49,5mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84) 06.04-06.15

View part

MPBS Polyurethane suspension sleeve 0801644A-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 49mm, length 52mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E90), 3 (E91), 3 (E92) 06.04-

View part

MPBS Polyurethane suspension sleeve 0801644A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 49mm, length 52mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E90), 3 (E91), 3 (E92) 06.04-

View part

MPBS Polyurethane suspension sleeve 0801644AB/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801644AB/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0801644B-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 67,7mm, length 58mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E90), 3 (E91), 3 (E92) 06.04-

View part

MPBS Polyurethane suspension sleeve 0801644B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 67,7mm, length 58mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E46), 3 (E90), 3 (E91) 12.97-

View part

MPBS Polyurethane suspension sleeve 0801648-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 70mm, length 76mm, quantity per set: 1pcs fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92) 06.04-08.16

View part

MPBS Polyurethane suspension sleeve 0801648-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 70mm, length 76mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E60), 5 (E61), X1 (E84) 06.04-08.16

View part

MPBS Polyurethane suspension sleeve 0801648-00/CS

Polyurethane front Swingarm bushing, hardness: 75 Sha, quantity per set: 1pcs fits: BMW 1 (E81), 1 (E82), 1 (E87), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E60), 5 (E61), X1 (E84) 12.01-08.16

View part

MPBS Polyurethane suspension sleeve 0801648-66-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 70mm, length 66mm fits: BMW 3 (E90), 3 (E91), 3 (E92), X1 (E84) 12.04-06.15

View part

MPBS Polyurethane suspension sleeve 0801648-66-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 70mm, length 66mm fits: BMW 3 (E90), 3 (E91), 3 (E92), X1 (E84) 12.04-06.15

View part

MPBS Polyurethane suspension sleeve 0801653A-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 80,4mm, length 81mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E90), 3 (E91), 3 (E92) 06.04-

View part

MPBS Polyurethane suspension sleeve 0801653A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 80,4mm, length 81mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E90), 3 (E91), 3 (E92) 06.04-

View part

MPBS Polyurethane suspension sleeve 0801653AB/80SHA

Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 4pcs fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E90), 3 (E91), 3 (E92) 06.04-

View part

MPBS Polyurethane suspension sleeve 0801653AB/90SHA

Polyurethane suspension bushings set, hardness: 90 Sha, quantity per set: 4pcs fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E90), 3 (E91), 3 (E92) 06.04-

View part

MPBS Polyurethane suspension sleeve 0801653AB/CS

Polyurethane suspension bushings set, hardness: 70 Sha/75 Sha, quantity per set: 4pcs fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E90), 3 (E91) 06.04-

View part

MPBS Polyurethane suspension sleeve 0801653B-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 74mm, length 89mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E90), 3 (E91), 3 (E92) 06.04-

View part

MPBS Polyurethane suspension sleeve 0801653B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 74mm, length 89mm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (E90), 3 (E91), 3 (E92) 06.04-

View part

MPBS Polyurethane suspension sleeve 0801666-00/80SHA

Polyurethane bushing,

View part

MPBS Wheel suspension track control arm, rear 0801666-00/90SHA

Rear axle track control arm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84) 1.6-4.0 06.04-06.15

View part

MPBS Polyurethane suspension sleeve 0801927-00/80SHA

Rear beam bushings (front), hardness: 80 Sha, outer diameter: 86,5mm, quantity per set: 2pcs fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93) 06.04-12.13

View part

MPBS Polyurethane suspension sleeve 08020123-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 08020123-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45mm, length 65mm fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (F30, F80), 3 (F31), 3 GRAN TURISMO (F34), 4 (F32, F82), 4 (F33 07.11-

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account