Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 0602908-00/90SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 62,8mm, length 55mm fits: AUDI A8 D2 03.94-09.02

View part

MPBS Polyurethane suspension sleeve 0602970-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40mm, length 46mm fits: AUDI A8 D2 03.94-09.02

View part

MPBS Polyurethane suspension sleeve 0602970-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 46mm fits: AUDI A8 D2 03.94-09.02

View part

MPBS Polyurethane suspension sleeve 0603002-PZ/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0603002-PZ/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0603012-00/80SHA

Front lower Swingarm bushing outer, hardness: 80 Sha, outer diameter: 44mm, length 45mm, quantity per set: 1pcs fits: AUDI A4 ALLROAD B8, A4 ALLROAD B9, A4 B8, A4 B9, A5, A6 ALLROAD C6 04.02-

View part

MPBS Polyurethane suspension sleeve 0603012-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 44mm, length 45mm fits: AUDI A4 ALLROAD B8, A4 ALLROAD B9, A4 B8, A4 B9, A5, A6 ALLROAD C6, A6 ALLROAD C7, A6 C6, A6 C7, A7, A8 D3 04.02-

View part

MPBS Polyurethane suspension sleeve 0603012-013-060/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0603012-013-060/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0603013-00/80SHA

Front lower Swingarm bushing (inner), hardness: 80 Sha, outer diameter: 55mm, length 60mm, quantity per set: 1pcs fits: AUDI A6 ALLROAD C6, A6 C6, A8 D3 BENTLEY CONTINENTAL FLYING SPUR 04.02-03.16

View part

MPBS Polyurethane suspension sleeve 0603013-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 55mm, length 60mm fits: AUDI A8 D3 BENTLEY CONTINENTAL FLYING SPUR VW PHAETON 04.02-03.16

View part

MPBS Polyurethane suspension sleeve 06030160-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 36mm, length 30mm fits: AUDI A8 D3 BENTLEY CONTINENTAL FLYING SPUR VW PHAETON 04.02-03.16

View part

MPBS Polyurethane suspension sleeve 06030160-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 36mm, length 30mm fits: AUDI A8 D3 BENTLEY CONTINENTAL FLYING SPUR VW PHAETON 04.02-03.16

View part

MPBS Polyurethane suspension sleeve 06030161-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 58mm, length 61mm fits: AUDI 100 C3, 100 C4, 80 B4, A6 C4, A8 D3 BENTLEY CONTINENTAL FLYING SPUR VW PHAETON 08.84-03.16

View part

MPBS Polyurethane suspension sleeve 06030161-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 58,3mm, length 61mm fits: AUDI 100 C3, 100 C4, 80 B4, A6 C4, A8 D3 BENTLEY CONTINENTAL FLYING SPUR VW PHAETON 08.84-03.16

View part

MPBS Polyurethane suspension sleeve 06030185-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 06030185-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0603029-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0603029-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0603060-00/80SHA

Front lower Swingarm bushing, hardness: 80 Sha, outer diameter: 75mm, length 80mm, quantity per set: 1pcs, banana fits: AUDI A4 B8, A8 D3, A8 D4 BENTLEY CONTINENTAL FLYING SPUR 04.02-01.18

View part

MPBS Polyurethane suspension sleeve 0603060-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 75mm, length 80mm fits: AUDI A4 B8, A8 D3, A8 D4 BENTLEY CONTINENTAL FLYING SPUR VW PHAETON 04.02-01.18

View part

MPBS Polyurethane suspension sleeve 0603060-00/CS

Front lower Swingarm bushing, hardness: 75 Sha, outer diameter: 75mm, length 80mm, quantity per set: 1pcs, banana fits: AUDI A4 B8, A8 D3, A8 D4 BENTLEY CONTINENTAL FLYING SPUR 04.02-01.18

View part

MPBS Polyurethane suspension sleeve 06033162-163-00/80SHA

Polyurethane rear upper transverse swingarm bushing, hardness: 80 Sha, outer diameter: 42mm, quantity per set: 1pcs fits: AUDI Q5 10.08-05.17

View part

MPBS Polyurethane suspension sleeve 06033162-163-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 42mm, length 46mm fits: AUDI A4 B8, A5, A6 C7, A8 D4, Q5 06.07-09.18

View part

MPBS Polyurethane suspension sleeve 0603552-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 36,3mm, length 50mm fits: AUDI R8 04.07-07.15

View part

MPBS Polyurethane suspension sleeve 0603552-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 36,3mm, length 50mm fits: AUDI R8 LAMBORGHINI GALLARDO 08.03-

View part

MPBS Polyurethane suspension sleeve 0604001-PZ/80SHA/S

Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 18pcs, for steel track control arm no stabilizer bar bushing fits: AUDI A3, TT SEAT LEON SKODA OCTAVIA I 12.96-06.06

View part

MPBS Polyurethane suspension sleeve 0604002/80SHA

Polyurethane bushing fits: AUDI TT VW GOLF IV 10.98-06.06

View part

MPBS Polyurethane suspension sleeve 0604002/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0604003Q/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0604016-00/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 70mm, length 60mm, quantity per set: 1pcs fits: AUDI A3, TT SEAT LEON SKODA OCTAVIA I VW BORA, BORA I, GOLF IV 12.96-06.06

View part

MPBS Polyurethane suspension sleeve 0604016-00/90SHA

Polyurethane suspension sleeve, hardness: 90 Sha, outer diameter: 70mm, length 60mm, quantity per set: 1pcs fits: AUDI A3, TT SEAT LEON SKODA OCTAVIA I VW BORA, BORA I, GOLF IV 12.96-06.06

View part

MPBS Polyurethane suspension sleeve 0604048-00/80SHA

Front Swingarm bushing 45mm, hardness: 80 Sha, outer diameter: 46mm, length 54mm, quantity per set: 2pcs fits: AUDI A3, TT SEAT IBIZA III, LEON VW POLO IV 10.98-11.09

View part

MPBS Polyurethane suspension sleeve 0604048-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 46mm, length 54mm fits: AUDI A3, TT SEAT LEON 10.98-06.06

View part

MPBS Polyurethane suspension sleeve 0604049-00/80SHA

Front Swingarm bushings rear, hardness: 80 Sha, outer diameter: 66,5mm, length 41mm, quantity per set: 2pcs fits: AUDI A1, A3, TT SEAT IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON 10.98-10.18

View part

MPBS Polyurethane suspension sleeve 0604049-00/90SHA

Polyurethane bushing, hardness: 90 Sha, length 41mm fits: AUDI A1, A3, TT SEAT IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON 10.98-10.18

View part

MPBS Polyurethane suspension sleeve 0604053-00/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 50mm, length 52mm, quantity per set: 1pcs fits: AUDI A3, TT SEAT LEON SKODA OCTAVIA I VW BORA, BORA I, GOLF IV 12.96-06.06

View part

MPBS Polyurethane suspension sleeve 0604053-00/90SHA

Polyurethane suspension sleeve, hardness: 90 Sha, outer diameter: 50mm, length 52mm, quantity per set: 1pcs fits: AUDI A3, TT SEAT LEON SKODA OCTAVIA I VW BORA, BORA I, GOLF IV 12.96-06.06

View part

MPBS Polyurethane suspension sleeve 0604059-00/80SHA

Rear transverse Swingarm bushing, hardness: 80 Sha, outer diameter: 50mm, length 30,5mm, quantity per set: 1pcs fits: AUDI A3, TT SEAT LEON SKODA OCTAVIA I VW BORA, BORA I, GOLF IV 09.96-06.06

View part

MPBS Polyurethane suspension sleeve 0604059-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 50mm, length 30,5mm fits: AUDI A3, TT SEAT LEON SKODA OCTAVIA I VW BORA I, GOLF IV, NEW BEETLE 12.96-06.06

View part

MPBS Rear wishbone silent block 06048127-00/80SHA

Rear track control arm silent block L/R (rear) fits: AUDI A6 C5, ALLROAD C5 VW PASSAT B5.5 1.8-4.2 02.97-08.05

View part

MPBS Rear wishbone silent block 06048127-00/90SHA

Rear track control arm silent block L/R (rear) fits: AUDI A6 C5, ALLROAD C5 VW PASSAT B5.5 1.8-4.2 02.97-08.05

View part

MPBS Polyurethane suspension sleeve 06048161-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 46mm, length 70mm fits: AUDI A6 C5, ALLROAD C5 VW PASSAT B5, PASSAT B5.5 10.96-08.05

View part

MPBS Polyurethane suspension sleeve 06048161-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 46mm, length 70mm fits: AUDI A6 C5, ALLROAD C5 VW PASSAT B5, PASSAT B5.5 10.96-08.05

View part

MPBS Polyurethane suspension sleeve 06048173/80SHA

Suspension sleeve (rear, L/R, hardness: 80 Sha) fits: AUDI A6 C5, ALLROAD C5 VW PASSAT B5, PASSAT B5.5 10.96-08.05

View part

MPBS Polyurethane suspension sleeve 0604835-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 36mm, length 30mm, quantity per set: 1pcs fits: AUDI A6 C5, A6 C6, ALLROAD C5 VW PASSAT B5, PASSAT B5.5 10.96-08.11

View part

MPBS Polyurethane suspension sleeve 0604835-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 36mm, length 30mm, quantity per set: 1pcs fits: AUDI A6 C5, A6 C6, ALLROAD C5 VW PASSAT B5, PASSAT B5.5 10.96-08.11

View part

MPBS Polyurethane suspension sleeve 0604859-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 36,5mm, length 87mm fits: AUDI A6 C5 02.97-01.05

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account