Partios Wholesale catalogue
Mpbs Distributor | Suspension & Steering
Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)
2,629 current catalogue lines
About the MPBS range
Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MPBS Polyurethane suspension sleeve 0604859-00/90SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 36,5mm, length 87mm fits: AUDI A6 C5 02.97-01.05
View partMPBS Polyurethane suspension sleeve 0604869-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 36,5mm, length 45,5mm, quantity per set: 1pcs fits: AUDI A6 C5 VW PASSAT B5.5 02.97-05.05
View partMPBS Polyurethane suspension sleeve 0604869-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 36,5mm, length 45,5mm, quantity per set: 1pcs fits: AUDI A6 C5 VW PASSAT B5.5 02.97-05.05
View partMPBS Polyurethane suspension sleeve 06057160-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 44mm, length 35mm, quantity per set: 1pcs fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 06057160-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 44mm, length 35mm fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 06057161-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 58mm, length 58mm, quantity per set: 1pcs fits: AUDI 100 C3, 100 C4, 80 B4, A4 B5, A6 C4 08.84-09.01
View partMPBS Polyurethane suspension sleeve 06057161-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 58mm, length 58mm fits: AUDI 100 C3, 100 C4, 80 B4, A4 B5, A6 C4, A8 D3 08.84-07.10
View partMPBS Polyurethane suspension sleeve 06057162-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 38mm, length 49mm, quantity per set: 1pcs fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 06057162-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 38mm, length 49mm fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 06057163-00/80SHA
Polyurethane rear upper transverse swingarm bushing, hardness: 80 Sha, outer diameter: 37mm, length 55mm, quantity per set: 1pcs fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 06057163-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 37mm, length 55mm fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 0605735-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 36mm, length 30mm, quantity per set: 1pcs fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 0605735-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 36mm, length 30mm fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 0605753-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 73,8mm, length 73mm, quantity per set: 1pcs fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 0605753-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 73,8mm, length 73mm, quantity per set: 1pcs fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 0605753-00/CS
Polyurethane bushing, hardness: 75 Sha, outer diameter: 73,8mm, length 73mm, quantity per set: 1pcs fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 0605798-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 36mm, length 58mm fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 0605798-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 36mm, length 58mm fits: AUDI 80 B4, A4 B5 09.91-09.01
View partMPBS Polyurethane suspension sleeve 0605835-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 43,5mm, length 50mm, quantity per set: 1pcs fits: AUDI A3, TT SEAT LEON SKODA OCTAVIA I VW BORA I, GOLF IV 12.96-06.06
View partMPBS Polyurethane suspension sleeve 0605835-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 43,5mm, length 50mm, quantity per set: 1pcs fits: AUDI A3, TT SEAT LEON SKODA OCTAVIA I VW BORA I, GOLF IV 12.96-06.06
View partMPBS Polyurethane suspension sleeve 0605960-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 80mm, length 94mm fits: AUDI A8 D5, E-TRON, Q7, Q8, Q8 E-TRON BENTLEY BENTAYGA VW TOUAREG 01.15-
View partMPBS Polyurethane suspension sleeve 0605960-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 80mm, length 94mm fits: AUDI A8 D5, Q7, Q8, Q8 E-TRON BENTLEY BENTAYGA VW TOUAREG 01.15-
View partMPBS Polyurethane suspension sleeve 0606061-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 46,5mm, length 50mm fits: AUDI A4 B9, A8 D5 05.15-
View partMPBS Polyurethane suspension sleeve 0606061-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 46,5mm, length 50mm fits: AUDI A4 B9, A8 D5 05.15-
View partMPBS Polyurethane suspension sleeve 0620291-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0800601/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0800630-00/80SHA
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 31,5mm, quantity per set: 1pcs fits: BMW 3 (E36) 09.90-08.00
View partMPBS Polyurethane suspension sleeve 0800630-00/90SHA
Polyurethane stabilizer bushing, hardness: 90 Sha, outer diameter: 31,5mm, quantity per set: 1pcs fits: BMW 3 (E36) 09.90-08.00
View partMPBS Polyurethane suspension sleeve 0800646-00/80SHA
Engine mount, hardness: 80 Sha, outer diameter: 70mm, length 48mm, quantity per set: 1pcs fits: BMW 3 (E30) 09.82-01.92
View partMPBS Polyurethane suspension sleeve 0800646-00/90SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 70mm, length 48mm fits: BMW 3 (E30) 09.82-01.92
View partMPBS Polyurethane suspension sleeve 0800653-00/80SHA
Rear beam bushings, hardness: 80 Sha, outer diameter: 58,8mm, length 105mm, quantity per set: 2pcs fits: BMW 3 (E30) 09.82-06.94
View partMPBS Polyurethane suspension sleeve 0800653-00/90SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 58,8mm, length 105mm fits: BMW 3 (E30) 09.82-01.92
View partMPBS Polyurethane suspension sleeve 0800701 80SHA
Polyurethane bushing fits: BMW 3 (E36) 09.90-11.98
View partMPBS Polyurethane suspension sleeve 0800701/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0800703/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0800704-00/80SHA
Front lower Swingarm bushing (centric), hardness: 80 Sha, outer diameter: 70mm, quantity per set: 2pcs fits: BMW 3 (E30), 3 (E36) 09.82-11.98
View partMPBS Polyurethane suspension sleeve 0800704-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0800716-00/80SHA
Rear swingarm bushing front, hardness: 80 Sha, outer diameter: 70mm, length 49mm, quantity per set: 1pcs fits: BMW 3 (E36), 3 (E46), Z4 (E86) 09.90-08.08
View partMPBS Polyurethane suspension sleeve 0800716-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0800716-00/CS
Polyurethane bushing (trailing arm, hardness: 70 Sha, inner diameter 12mm) fits: BMW 3 (E46) 12.97-05.05
View partMPBS Polyurethane suspension sleeve 0800717-00/80SHA
Rear upper transverse Swingarm bushing (inner), hardness: 80 Sha, outer diameter: 35,5mm, length 66mm, quantity per set: 1pcs fits: BMW 3 (E30), 3 (E36), 3 (E46), X3 (E83), Z4 (E85) 09.82-08.16
View partMPBS Polyurethane suspension sleeve 0800717-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 35,5mm, length 66mm fits: BMW 3 (E36), 3 (E46), Z4 (E85), Z4 (E86), Z4 (E89) 09.90-08.16
View partMPBS Polyurethane suspension sleeve 0800717-00/CS
Polyurethane bushing (swingarm) fits: BMW 3 (E46) 12.97-07.06
View partMPBS Polyurethane suspension sleeve 0800718-00/80SHA
Rear lower transverse Swingarm bushing (inner), hardness: 80 Sha, outer diameter: 45mm, quantity per set: 1pcs fits: BMW 3 (E30), 3 (E36), 3 (E46), X3 (E83), Z4 (E85), Z4 (E86), Z4 (E89) 09.82-08.16
View partMPBS Polyurethane suspension sleeve 0800718M-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 35,6mm, length 57mm fits: BMW 3 (E36), 3 (E46), Z4 (E85), Z4 (E86), Z4 (E89) 09.90-08.16
View partMPBS Polyurethane suspension sleeve 0800718M-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 35,6mm, length 57mm fits: BMW 3 (E30), 3 (E36), 3 (E46), X3 (E83), Z4 (E85), Z4 (E86), Z4 (E89) 09.82-08.16
View partMPBS Polyurethane suspension sleeve 0800719-00/80SHA
Rear steering knuckle bushing (upper/lower), hardness: 80 Sha, outer diameter: 45,6mm, length 57mm, quantity per set: 1pcs fits: BMW 3 (E36), 3 (E46), X3 (E83), Z4 (E85), Z4 (E86) 09.90-08.16
View partMPBS Polyurethane suspension sleeve 0800719-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 45,6mm, length 57mm fits: BMW 3 (E36), 3 (E46), X3 (E83), Z4 (E85), Z4 (E86), Z4 (E89) 09.90-08.16
View partBuying with Partios
Buying MPBS parts through Partios
Are these genuine MPBS parts?
- Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MPBS parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.
Do you supply MPBS parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MPBS parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MPBS order?
- It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MPBS parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account