Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 0601701/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601703/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601703/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601718-00/80SHA

Polyurethane suspension sleeve, hardness: 80 Sha, outer diameter: 40mm, length 37mm, quantity per set: 1pcs fits: AUDI A4 B6, A4 B7, A6 ALLROAD C6, A6 C6 SEAT EXEO, EXEO ST 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601718-00/90SHA

Polyurethane suspension sleeve, hardness: 90 Sha, outer diameter: 40mm, length 37mm, quantity per set: 1pcs fits: AUDI A4 B6, A4 B7, A6 ALLROAD C6, A6 C6 SEAT EXEO, EXEO ST 11.00-05.13

View part

MPBS Rear suspension beam silent block 0601719-00/80SHA

Rear suspension beam silent block fits: AUDI A4 B6, A4 B7, A6 ALLROAD C6, A6 C6 SEAT EXEO 1.6-5.2 11.00-05.13

View part

MPBS Rear suspension beam silent block 0601719-00/90SHA

Rear suspension beam silent block fits: AUDI A4 B6, A4 B7, A6 ALLROAD C6, A6 C6 SEAT EXEO 1.6-5.2 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601721-00/80SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 46mm, length 49mm, quantity per set: 1pcs fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601721-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 46mm, length 49mm, quantity per set: 1pcs fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601722A-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 53mm, length 40mm fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601722A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 53mm, length 40mm fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601722B-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 47,2mm, length 50mm fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601722B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 47mm, length 50mm fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601753A-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 80mm, length 59mm fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601753A-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 87mm, length 59mm fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601753AB/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601753AB/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601753B-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 80mm, length 68mm fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601753B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 80mm, length 68mm fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601783-00/80SHA

Rear upper swingarm bushings, hardness: 80 Sha, outer diameter: 36mm, length 46mm, quantity per set: 4pcs fits: AUDI A4 B6, A4 B7 SEAT EXEO, EXEO ST 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601783-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 36mm, length 46mm fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601788-00/80SHA

Rear transverse swingarm bushings, hardness: 80 Sha, outer diameter: 44mm, length 60mm, quantity per set: 2pcs fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601788-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 44mm, length 60mm fits: AUDI A4 B6, A4 B7 SEAT EXEO 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 0601902/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601902/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601912-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 44mm, length 45mm, quantity per set: 1pcs fits: AUDI A4 ALLROAD B8, A4 ALLROAD B9, A4 B8, A4 B9, A5, A6 ALLROAD C6 10.02-

View part

MPBS Polyurethane suspension sleeve 0601912-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 44mm, length 45mm, quantity per set: 1pcs fits: AUDI A4 ALLROAD B8, A4 ALLROAD B9, A4 B8, A4 B9, A5, A6 ALLROAD C6 10.02-

View part

MPBS Polyurethane suspension sleeve 0601913-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 50mm, length 55mm, quantity per set: 1pcs fits: AUDI A4 ALLROAD B8, A4 ALLROAD B9, A4 B8, A4 B9, A5, A6 ALLROAD C7 06.07-

View part

MPBS Polyurethane suspension sleeve 0601913-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 50mm, length 54mm, quantity per set: 1pcs fits: AUDI A4 ALLROAD B8, A4 ALLROAD B9, A4 B8, A4 B9, A5, A6 ALLROAD C7 06.07-

View part

MPBS Transmission mount 06022151-00/80SHA

Transmission mount front L/R fits: AUDI 100 C4, A6 C4 1.8-4.2 12.90-12.97

View part

MPBS Polyurethane suspension sleeve 06022151-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 55mm, length 60mm fits: AUDI 100 C4, A6 C4 12.90-12.97

View part

MPBS Polyurethane suspension sleeve 0602272-00/80SHA

Control rod bushings, hardness: 80 Sha, outer diameter: 28mm, length 30mm, quantity per set: 2pcs, not for Quattro fits: AUDI 100 C3, 100 C4, 80 B2, 80 B3, A6 C4 08.78-10.97

View part

MPBS Polyurethane suspension sleeve 0602272-00/90SHA

Polyurethane bushing, transverse track control arm, hardness: 90 Sha,

View part

MPBS Polyurethane suspension sleeve 06023116-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 61mm, length 25mm, quantity per set: 4pcs fits: AUDI 100 C4, A6 C4 12.90-12.97

View part

MPBS Polyurethane suspension sleeve 06023116-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 61mm, length 25mm fits: AUDI 100 C4, A6 C4 12.90-12.97

View part

MPBS Polyurethane suspension sleeve 0602429-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0602429-00/80SHA/25

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 26mm, quantity per set: 2pcs fits: AUDI A4 ALLROAD B8, A4 B5, A4 B8, A5, A6 C7, A7, A8 D2 SKODA SUPERB I VW PASSAT B5 03.94-09.18

View part

MPBS Polyurethane suspension sleeve 0602429-00/80SHA/27

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 26mm, quantity per set: 2pcs fits: AUDI A4 B5, A4 B6, A6 C5, A6 C6, A8 D2 SKODA SUPERB I VW PASSAT B5, PASSAT B5.5 03.94-03.11

View part

MPBS Polyurethane suspension sleeve 0602429-00/80SHA/29

Polyurethane stabilizer bushing, hardness: 80 Sha, quantity per set: 2pcs fits: AUDI A4 B5, A4 B6, A4 B7, A4 B8, A4 B9, A5, A6 C5, A6 C6, A6 C7, A6 C8, A7, A8 D2, A8 D4, A8 D5, ALLROAD C5, Q5 03.94-

View part

MPBS Polyurethane suspension sleeve 0602429-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0602453Q-00/80SHA

Rear trolley bushing, hardness: 80 Sha, quantity per set: 4pcs fits: AUDI A6 C5 VW PASSAT B5, PASSAT B5.5 10.96-05.05

View part

MPBS Polyurethane suspension sleeve 0602461-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 46mm, length 40mm fits: AUDI A4 B5, A4 B6, A4 B7, A4 B8, A4 B9, A5, A6 C5, A6 C6, A6 C7, A6 C8, A8 D2, A8 D3, A8 D4, A8 D5, Q5 03.94-

View part

MPBS Polyurethane suspension sleeve 0602461-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 46mm, length 40mm fits: AUDI A4 B5, A4 B6, A4 B7, A4 B8, A4 B9, A5, A6 C5, A6 C6, A6 C7, A6 C8, A7, A8 D2, A8 D3, A8 D4, A8 D5, Q5 03.94-

View part

MPBS Polyurethane suspension sleeve 0602671-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 34,6mm, length 32mm, quantity per set: 1pcs fits: AUDI A4 ALLROAD B9, A4 B8, A4 B9, A5, A6 ALLROAD C7, A6 C7, A6 C8, A7 06.07-

View part

MPBS Polyurethane suspension sleeve 0602671-00/90SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 34,6mm, length 32mm, quantity per set: 1pcs fits: AUDI A4 ALLROAD B9, A4 B8, A4 B9, A5, A6 ALLROAD C7, A6 C7, A6 C8, A7 06.07-

View part

MPBS Polyurethane suspension sleeve 0602902/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0602902/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0602908-00/80SHA

Front upper Swingarm bushings front, hardness: 80 Sha, outer diameter: 62,8mm, length 55mm, quantity per set: 2pcs fits: AUDI A8 D2 03.94-09.02

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account