Partios Wholesale catalogue
Mpbs Distributor | Suspension & Steering
Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)
2,629 current catalogue lines
About the MPBS range
Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MPBS Polyurethane suspension sleeve 0601348-00/90SHA
Front Swingarm bushing 30mm, hardness: 90 Sha, outer diameter: 30mm, length 54mm, quantity per set: 2pcs fits: AUDI A1, A3 SEAT CORDOBA, IBIZA II, IBIZA IV, LEON, TOLEDO I, TOLEDO II 08.83-05.22
View partMPBS Polyurethane suspension sleeve 0601348-49/80SHA
Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 4pcs fits: SKODA OCTAVIA I VW GOLF IV 09.96-12.10
View partMPBS Polyurethane suspension sleeve 0601348-49/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601349-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601349-00/80SHA/13
Front 13mm Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 67mm, quantity per set: 2pcs fits: AUDI A1, A3, TT SEAT IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON, MII, TOLEDO II 09.96-11.23
View partMPBS Polyurethane suspension sleeve 0601349-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601353-00/80SHA
Rear beam bushings, hardness: 80 Sha, outer diameter: 72mm, length 89mm, quantity per set: 2pcs fits: AUDI A3, TT SEAT CORDOBA, IBIZA III, LEON, TOLEDO I, TOLEDO IV SKODA FABIA I 05.91-04.19
View partMPBS Polyurethane suspension sleeve 0601353-00/90SHA
Rear beam bushings, hardness: 90 Sha, outer diameter: 72mm, length 89mm, quantity per set: 2pcs fits: AUDI A3, TT SEAT CORDOBA, IBIZA III, LEON, TOLEDO I SKODA FABIA I, OCTAVIA I 05.91-05.15
View partMPBS Polyurethane suspension sleeve 0601354-00/80SHA
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 34mm, length 23mm, quantity per set: 4pcs fits: AUDI A3 SEAT LEON, TOLEDO II SKODA OCTAVIA I VW BORA, BORA I 09.96-12.13
View partMPBS Polyurethane suspension sleeve 0601354-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 34mm, length 23mm fits: AUDI A3 SEAT LEON, TOLEDO II VW BORA, BORA I, GOLF IV, NEW BEETLE 09.96-12.13
View partMPBS Polyurethane suspension sleeve 0601402-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601402-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601402/80SHA/22
Polyurethane suspension bushings set, quantity per set: 6pcs fits: AUDI A3, TT SEAT ALTEA, ALTEA XL, LEON, TOLEDO III VW GOLF V, PASSAT B6, TIGUAN, TOURAN 02.03-07.18
View partMPBS Polyurethane suspension sleeve 0601402/80SHA/23
Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 6pcs fits: AUDI A3, TT SEAT ALTEA, ALTEA XL, LEON, TOLEDO III VW GOLF V, PASSAT B6, TIGUAN, TOURAN 02.03-07.18
View partMPBS Polyurethane suspension sleeve 06014135-00/80SHA
Gearbox catch bushing, hardness: 80 Sha, outer diameter: 39mm, length 41mm, quantity per set: 1pcs fits: AUDI A3, TT SEAT ALTEA, LEON, TOLEDO I VW BORA, BORA I, GOLF IV, NEW BEETLE 05.91-07.15
View partMPBS Polyurethane suspension sleeve 06014135-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 39mm, length 41mm fits: AUDI A3, TT SEAT LEON, TOLEDO I SKODA OCTAVIA I VW BORA I, GOLF IV, NEW BEETLE 05.91-12.13
View partMPBS Polyurethane suspension sleeve 0601429-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601429-00/80SHA/19,5
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 41,5mm, quantity per set: 2pcs fits: AUDI A3 SEAT ALTEA, LEON SKODA OCTAVIA II VW GOLF PLUS V, GOLF V, GOLF VI 05.03-06.13
View partMPBS Polyurethane suspension sleeve 0601429-00/80SHA/20
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 41,5mm, quantity per set: 2pcs fits: SEAT LEON SKODA OCTAVIA II VW GOLF V, GOLF VI 10.03-11.13
View partMPBS Polyurethane suspension sleeve 0601429-00/80SHA/20,5
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 41,5mm, quantity per set: 2pcs fits: SEAT LEON SKODA OCTAVIA II VW GOLF V, GOLF VI 01.04-11.13
View partMPBS Polyurethane suspension sleeve 0601429-00/80SHA/21,5
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 41,5mm, quantity per set: 2pcs fits: SEAT LEON SKODA OCTAVIA II VW GOLF V 01.04-06.13
View partMPBS Polyurethane suspension sleeve 0601429-00/80SHA/22
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 41,5mm, quantity per set: 2pcs fits: AUDI A3 SEAT ALTEA, LEON SKODA OCTAVIA II VW GOLF V, GOLF VI, PASSAT B6 05.03-05.16
View partMPBS Polyurethane suspension sleeve 0601429-00/80SHA/23
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 41,5mm, quantity per set: 2pcs fits: SEAT LEON SKODA OCTAVIA II VW GOLF V, GOLF VI 10.03-05.16
View partMPBS Polyurethane suspension sleeve 0601429-00/80SHA/24
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 41,5mm, quantity per set: 2pcs fits: SEAT LEON SKODA OCTAVIA II VW GOLF V, GOLF VI 10.03-05.16
View partMPBS Polyurethane suspension sleeve 0601429-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601440-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601440-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601440/65SHA
Polyurethane gearshift pad, hardness: 65 Sha, quantity per set: 3pcs fits: SEAT LEON SKODA OCTAVIA I VW BORA, BORA I, GOLF IV, NEW BEETLE 09.96-12.13
View partMPBS Polyurethane suspension sleeve 0601440/80SHA
Polyurethane gearshift pad, hardness: 80 Sha, quantity per set: 3pcs fits: SEAT LEON SKODA OCTAVIA I VW BORA, BORA I, GOLF IV, NEW BEETLE 09.96-12.13
View partMPBS Polyurethane suspension sleeve 0601440AB-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601440AB/80SHA
Gearbox pad inserts, hardness: 80 Sha, outer diameter: 88mm, quantity per set: 1pcs fits: AUDI A3 SEAT LEON, TOLEDO II VW BORA, BORA I, GOLF IV, NEW BEETLE 09.96-12.13
View partMPBS Polyurethane suspension sleeve 0601440AB/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601601/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601601/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601601Q/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601601Q/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601603Q/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601603Q/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 0601612-00/80SHA
Front lower Swingarm bushings (outer), hardness: 80 Sha, outer diameter: 40mm, length 50mm fits: AUDI A4 B5, A4 B6, A4 B7, A6 C4, A6 C5, A8 D2, ALLROAD C5 SKODA SUPERB I VW PASSAT B5 03.94-03.09
View partMPBS Polyurethane suspension sleeve 0601612-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 50mm fits: AUDI A4 B5, A4 B6, A4 B7, A6 C5 SKODA SUPERB I VW PASSAT B5 11.94-06.08
View partMPBS Polyurethane suspension sleeve 0601613-00/80SHA
Front lower Swingarm bushing (inner), hardness: 80 Sha, outer diameter: 50mm, length 58mm, quantity per set: 2pcs fits: AUDI A4 B5, A4 B6, A4 B7, A6 C4, A6 C5, A8 D2 SKODA KODIAQ I 03.94-
View partMPBS Polyurethane suspension sleeve 0601613-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 50mm, length 60mm fits: AUDI A4 B5, A4 B6, A6 C5, A8 D2 SKODA SUPERB I VW PASSAT B5 03.94-03.08
View partMPBS Polyurethane suspension sleeve 0601653-00/80SHA
Rear beam bushings, hardness: 80 Sha, outer diameter: 56mm, length 101mm, quantity per set: 2pcs fits: AUDI A4 B5 11.94-09.01
View partMPBS Polyurethane suspension sleeve 0601653-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 56mm, length 101mm fits: AUDI A4 B5 11.94-09.01
View partMPBS Polyurethane suspension sleeve 0601653-00/CS
Rear beam bushings, hardness: 75 Sha, outer diameter: 56mm, length 101mm, quantity per set: 2pcs fits: AUDI A4 B5 11.94-11.00
View partMPBS Polyurethane suspension sleeve 0601661-00/80SHA
Front upper Swingarm bushing, hardness: 80 Sha, outer diameter: 46mm, length 40mm, quantity per set: 2pcs fits: AUDI A4 B5, A4 B6, A4 B7, A4 B8, A4 B9, A5, A6 C5, A6 C6, A6 C7, A6 C8, A7 03.94-
View partMPBS Polyurethane suspension sleeve 0601661-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 46mm, length 40mm fits: AUDI A4 B5, A4 B6, A4 B7, A4 B8, A4 B9, A5, A6 C5, A6 C6, A6 C7, A6 C8, A7, A8 D2, A8 D3, A8 D4, A8 D5, Q5 03.94-
View partMPBS Polyurethane suspension sleeve 0601701/80SHA
Polyurethane bushing,
View partBuying with Partios
Buying MPBS parts through Partios
Are these genuine MPBS parts?
- Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MPBS parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.
Do you supply MPBS parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MPBS parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MPBS order?
- It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MPBS parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account