Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 06004128B-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 06004128B-00/80SHA/2

Polyurethane bushing, hardness: 80 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: AUDI 80 B1, 80 B2, 80 B3, 80 B4, 90 B2, 90 B3, COUPE B2, COUPE B3 VW PASSAT B1, PASSAT B2 05.72-12.96

View part

MPBS Polyurethane suspension sleeve 06004128B-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 06004128B-00/90SHA/2

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38mm, quantity per set: 1pcs fits: AUDI 80 B1, 80 B2, 80 B3, 80 B4, 90 B2, 90 B3, COUPE B2, COUPE B3 VW PASSAT B1, PASSAT B2 05.72-12.96

View part

MPBS Polyurethane suspension sleeve 0600429-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0600429-00/80SHA/20

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 41mm, quantity per set: 2pcs fits: AUDI 80 B3, 80 B4 06.86-01.96

View part

MPBS Polyurethane suspension sleeve 0600429-00/80SHA/22

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 41mm, quantity per set: 2pcs fits: AUDI 80 B3, 80 B4, 90 B3 06.86-01.96

View part

MPBS Polyurethane suspension sleeve 0600429-00/80SHA/25

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 41mm, quantity per set: 2pcs fits: AUDI 80 B4 09.91-12.94

View part

MPBS Polyurethane suspension sleeve 0600429-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0600430-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0600430-00/80SHA/11

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 2pcs fits: AUDI 80 B4 SEAT LEON VW GOLF IV 09.91-06.06

View part

MPBS Polyurethane suspension sleeve 0600430-00/80SHA/12

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 2pcs fits: AUDI 80 B3, 80 B4, A3 SEAT LEON VW BORA, BORA I, GOLF IV 06.86-06.06

View part

MPBS Polyurethane suspension sleeve 0600430-00/80SHA/13

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 2pcs fits: AUDI 80 B3, 80 B4, 90 B3 SEAT LEON VW BORA, BORA I, GOLF IV 06.86-06.06

View part

MPBS Polyurethane suspension sleeve 0600430-00/80SHA/14

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 2pcs fits: AUDI 80 B3, 80 B4, TT SEAT LEON VW BORA, BORA I, GOLF IV 06.86-06.06

View part

MPBS Polyurethane suspension sleeve 0600430-00/80SHA/15

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 2pcs fits: AUDI 80 B3, 80 B4, 90 B3, TT VW GOLF IV 06.86-06.06

View part

MPBS Polyurethane suspension sleeve 0600430-00/80SHA/16

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 2pcs fits: AUDI 80 B3, 80 B4, 90 B2, 90 B3, TT SEAT LEON VW BORA, BORA I, GOLF IV 10.84-06.14

View part

MPBS Polyurethane suspension sleeve 0600430-00/80SHA/17

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 2pcs fits: SEAT LEON VW BORA I, GOLF IV 11.98-06.06

View part

MPBS Polyurethane suspension sleeve 0600430-00/80SHA/18

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 2pcs fits: AUDI 80 B3, 80 B4, 90 B3, A3 VW BORA, BORA I, GOLF IV 06.86-06.06

View part

MPBS Polyurethane suspension sleeve 0600430-00/80SHA/19

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 2pcs fits: AUDI 80 B3, 80 B4, 90 B3, A3 SEAT LEON VW BORA, BORA I, GOLF IV 06.86-06.06

View part

MPBS Polyurethane suspension sleeve 0600430-00/80SHA/22

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 40mm, quantity per set: 2pcs fits: AUDI 80 B3, 80 B4, 90 B3, A3, A4 B5, A4 B6, TT SEAT LEON VW BORA, BORA I, GOLF IV 06.86-06.14

View part

MPBS Polyurethane suspension sleeve 0600430-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0600452B-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 44,6mm, length 44mm fits: AUDI 80 B4 09.91-01.96

View part

MPBS Polyurethane suspension sleeve 0600452B-00/80SHA/45

Front lower Swingarm bushing 45mm, hardness: 80 Sha, outer diameter: 54mm, quantity per set: 1pcs fits: AUDI 80 B2, 80 B3, 80 B4, 90 B2, 90 B3 VW PASSAT B2 08.78-01.96

View part

MPBS Polyurethane suspension sleeve 0600452B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 44,6mm, length 44mm fits: AUDI 80 B4 09.91-01.96

View part

MPBS Polyurethane suspension sleeve 0600452C-00/80SHA

Front lower Swingarm bushing 37 mm, hardness: 80 Sha, outer diameter: 37mm, length 44mm, quantity per set: 1pcs fits: AUDI 80 B2, 80 B3, 80 B4, 90 B2, 90 B3 08.78-01.96

View part

MPBS Polyurethane suspension sleeve 0600452C-00/90SHA

Front lower Swingarm bushing 37 mm, hardness: 90 Sha, outer diameter: 37mm, length 44mm, quantity per set: 1pcs fits: AUDI 80 B2, 80 B3, 80 B4 08.78-01.96

View part

MPBS Polyurethane suspension sleeve 0600452C-00/CS

Front lower Swingarm bushing 37 mm, hardness: 75 Sha, outer diameter: 37mm, length 44mm, quantity per set: 1pcs fits: AUDI 80 B2, 80 B3, 80 B4, 90 B2, 90 B3 VW PASSAT B2 08.78-01.96

View part

MPBS Polyurethane suspension sleeve 0601016-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 44mm, length 23mm fits: AUDI 100 C4, 200 C3, A6 C4, V8 08.83-10.97

View part

MPBS Polyurethane suspension sleeve 0601016-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 44mm, length 23mm fits: AUDI 100 C3, 200 C3, A6 C4, V8 08.83-10.97

View part

MPBS Polyurethane suspension sleeve 0601021-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 32mm, length 43mm fits: AUDI 100 C3, 100 C4, A6 C4, V8 08.84-12.97

View part

MPBS Polyurethane suspension sleeve 0601021-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 32mm, length 43mm fits: AUDI 100 C3, 100 C4, A6 C4, V8 08.84-12.97

View part

MPBS Polyurethane suspension sleeve 0601022-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 58mm, length 58mm, quantity per set: 1pcs fits: AUDI 100 C3, 100 C4, 200 C3, 80 B4, A6 C4, V8 09.83-12.97

View part

MPBS Polyurethane suspension sleeve 0601022-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 58mm, length 58mm, quantity per set: 1pcs fits: AUDI 100 C3, 100 C4, 200 C3, 80 B4, A6 C4, V8 09.83-12.97

View part

MPBS Polyurethane suspension sleeve 0601053-00/80SHA

Rear beam bushings, hardness: 80 Sha, outer diameter: 62mm, length 57mm, quantity per set: 2pcs fits: AUDI 100 C4, A6 C4 12.90-12.97

View part

MPBS Polyurethane suspension sleeve 0601053-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 62mm, length 57mm fits: AUDI 100 C4, A6 C4 12.90-12.97

View part

MPBS Polyurethane suspension sleeve 0601301/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601301/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601302 80SHA

Polyurethane bushing fits: AUDI A3 SEAT LEON, TOLEDO II SKODA OCTAVIA I VW GOLF IV, NEW BEETLE 09.96-12.10

View part

MPBS Polyurethane suspension sleeve 0601302/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601329-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601329-00/80SHA/15

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36mm, quantity per set: 2pcs fits: AUDI A3 SEAT LEON, TOLEDO II SKODA OCTAVIA I, OCTAVIA II VW BORA, BORA I, GOLF IV 09.96-12.13

View part

MPBS Polyurethane suspension sleeve 0601329-00/80SHA/19

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36mm, quantity per set: 2pcs fits: AUDI A3 SEAT LEON, TOLEDO II SKODA OCTAVIA I, OCTAVIA II VW BORA, BORA I, GOLF IV 09.96-12.13

View part

MPBS Polyurethane suspension sleeve 0601329-00/80SHA/20

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36mm, quantity per set: 2pcs fits: AUDI A3 SEAT LEON, TOLEDO II VW BORA, BORA I, GOLF IV 09.96-12.13

View part

MPBS Polyurethane suspension sleeve 0601329-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36mm, quantity per set: 2pcs fits: AUDI A3 SEAT LEON, TOLEDO II VW GOLF IV, NEW BEETLE 09.96-09.10

View part

MPBS Polyurethane suspension sleeve 0601329-00/80SHA/22

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36mm, quantity per set: 2pcs fits: AUDI A3 SEAT LEON, TOLEDO II VW BORA, BORA I, GOLF IV 09.96-12.13

View part

MPBS Polyurethane suspension sleeve 0601329-00/80SHA/23

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 36mm, quantity per set: 2pcs fits: AUDI A3 SEAT LEON, TOLEDO II VW GOLF IV, NEW BEETLE 09.96-09.10

View part

MPBS Polyurethane suspension sleeve 0601329-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0601348-00/80SHA

Front Swingarm bushing 30mm, hardness: 80 Sha, outer diameter: 30mm, length 54mm, quantity per set: 2pcs fits: AUDI A1, A3 SEAT CORDOBA, IBIZA II, LEON, TOLEDO I, TOLEDO II 08.83-10.18

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account