Partios Wholesale catalogue

Monroe Distributor | Suspension & Steering

Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)

12,796 current catalogue lines

About the MONROE range

Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,796 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MONROE Stabilizer link L43660

Stabilizer link rear L 88mm fits: HYUNDAI GRAND SANTA FÉ, SANTA FÉ III KIA SORENTO II 2.0D-3.5 09.12-12.18

View part

MONROE Stabilizer link L43661

Stabilizer link front L/R 282mm fits: HYUNDAI BAYON, ELANTRA V, I20 ACTIVE, I20 II, I30, TUCSON KIA CEE'D, RIO IV, SPORTAGE IV 1.0-2.4 09.10-

View part

MONROE Stabilizer link L43662

Stabilizer link front L/R 350mm fits: HYUNDAI SANTA FE IV, TUCSON KIA EV9, SELTOS, SORENTO III, SORENTO IV 1.6-Electric 01.15-

View part

MONROE Front track control arm silent block L43801

Front track control arm silent block front L/R (16x66x60 mm) fits: HYUNDAI ACCENT III, I40 I, I40 I CW KIA CARENS III, RIO II 1.4-2.0 03.05-05.19

View part

MONROE Front track control arm silent block L43804

Front track control arm silent block in the back L/R (12x38x55 mm) fits: HYUNDAI ELANTRA IV, GRAND SANTA FÉ, I30, SANTA FÉ III, SONATA VI, TUCSON KIA CARENS III, CEE'D 1.4-3.3 06.04-05.23

View part

MONROE Front track control arm silent block L43807

Track control arm silent block in the front L/R fits: HYUNDAI IX35, IX55 KIA SPORTAGE III 1.6-Electric 01.07-12.16

View part

MONROE Front track control arm silent block L43808

Front track control arm silent block in the front L/R (12,3x40x54 mm) fits: HYUNDAI ACCENT IV, CRETA, ELANTRA V, ELANTRA VI, I30, I40 I, I40 I CW, IONIQ, KONA, VELOSTER 1.0-Electric 09.10-

View part

MONROE Front track control arm silent block L43809

Front track control arm silent block in the front L/R (14x66x60 mm) fits: HYUNDAI SANTA FÉ II KIA SORENTO II 2.0D-3.5 11.05-12.15

View part

MONROE Stabilizer bar bushing L43817

Stabilizer bar bushing front inner L/R (23mm) fits: HYUNDAI ACCENT III KIA RIO II 1.4/1.5D/1.6 03.05-12.11

View part

MONROE Stabilizer bar bushing L43819

Stabilizer bar bushing front L/R (19,5mm) fits: HYUNDAI I20 I, IX20 KIA VENGA 1.1D-1.6D 08.08-07.19

View part

MONROE Stabilizer bar bushing L43825

Stabilizer bar bushing front inner L/R (22mm) fits: HYUNDAI ELANTRA IV, I30 KIA CEE'D, CERATO II, PRO CEE'D 1.4-2.0LPG 11.05-02.14

View part

MONROE Front track control arm silent block L43829

Front track control arm silent block in the back L/R (14,3x70x60 mm) fits: HYUNDAI GRAND SANTA FÉ, GRANDEUR, I30, IX35, SANTA FÉ III, SONATA VI KIA CEE'D, CERATO III, OPTIMA 1.0-3.5 06.09-

View part

MONROE Front track control arm silent block L43832

Front track control arm silent block in the back L/R (14x66x53,5 mm) fits: HYUNDAI ELANTRA IV, I30 KIA CARENS III, CEE'D, PRO CEE'D 1.4-2.0LPG 11.05-12.13

View part

MONROE Rear suspension beam silent block L43836

Rear suspension beam silent block L/R fits: HYUNDAI ACCENT IV, I10 II KIA RIO III 1.0-1.6D 11.10-

View part

MONROE Wheel suspension track control arm, front L43A01

Front axle track control arm R bottom/transverse front (with a joint (knuckle) with rubber pad) fits: HYUNDAI ELANTRA V, VELOSTER 1.6/1.6D/1.8 09.10-12.17

View part

MONROE Wheel suspension track control arm, front L43A02

Front axle track control arm L bottom front fits: HYUNDAI ELANTRA V, VELOSTER 1.6/1.6D/1.8 09.10-12.17

View part

MONROE Wheel suspension track control arm, front L43A03

Front axle track control arm R bottom/transverse front (with a joint (knuckle) with rubber pad) fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-2.0 11.11-

View part

MONROE Wheel suspension track control arm, front L43A04

Front axle track control arm L bottom/transverse front (with a joint (knuckle) with rubber pad) fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-2.0 11.11-

View part

MONROE Wheel suspension track control arm, front L43A05

Front axle track control arm R front fits: HYUNDAI MATRIX 1.5D/1.6/1.8 06.01-08.10

View part

MONROE Wheel suspension track control arm, front L43A06

Front axle track control arm L front fits: HYUNDAI MATRIX 1.5D/1.6/1.8 06.01-08.10

View part

MONROE Wheel suspension track control arm, front L43A07

Front axle track control arm R bottom front fits: HYUNDAI ACCENT IV KIA RIO III 1.4/1.6/1.6D 11.10-

View part

MONROE Wheel suspension track control arm, front L43A08

Front axle track control arm L bottom front fits: HYUNDAI ACCENT IV KIA RIO III 1.4/1.6/1.6D 11.10-

View part

MONROE Front ball joint L43A09

Axle ball joint L/R (bottom/outer front) fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.4-2.0LPG 12.06-02.13

View part

MONROE Steering knuckle silent block L43A10

Knuckle silentblock L/R rear (bottom) fits: HYUNDAI ELANTRA IV, GRAND SANTA FÉ, GRANDEUR, I30, I40 I, I40 I CW, IONIQ 5, IX55, SANTA FE IV, SANTA FÉ III, SONATA VII 1.4-Electric 04.06-

View part

MONROE Wheel suspension track control arm, front L43A11

Front axle track control arm R bottom front fits: HYUNDAI GRAND SANTA FÉ, SANTA FÉ III KIA SORENTO II 2.0D-3.5 06.09-12.18

View part

MONROE Wheel suspension track control arm, front L43A12

Front axle track control arm L bottom front fits: HYUNDAI GRAND SANTA FÉ, SANTA FÉ III KIA SORENTO II 2.0D-3.5 06.09-12.18

View part

MONROE Wheel suspension track control arm, front L43A13

Front axle track control arm R bottom front 18 mm fits: KIA PICANTO II 1.0/1.0LPG/1.2 05.11-03.17

View part

MONROE Wheel suspension track control arm, front L43A14

Front axle track control arm L bottom/transverse front (with a joint (knuckle) with rubber pad) fits: KIA PICANTO II 1.0/1.0LPG/1.2 05.11-03.17

View part

MONROE Front ball joint L43A20

Axle ball joint (top front) (cone diameter 15,9mm) fits: HYUNDAI TERRACAN 2.5D/2.9D/3.5 11.01-12.06

View part

MONROE Wheel suspension track control arm, rear L43A23

Rear axle track control arm L/R (top, rear, transverse) fits: HYUNDAI GRANDEUR, I40 I, I40 I CW, NEXO 1.6-Electric 01.11-

View part

MONROE Wheel suspension track control arm, rear L43A24

Rear axle track control arm L/R (top, rear, transverse) fits: HYUNDAI IX35, SANTA FÉ III, SONATA VI KIA OPTIMA, SPORTAGE II, SPORTAGE III 1.6-Electric 09.04-12.18

View part

MONROE Wheel suspension track control arm, front L43A29

Front axle track control arm R bottom/transverse front (with a joint (knuckle) with rubber pad) fits: HYUNDAI I10 II, I10 III 1.0/1.0LPG/1.2 08.13-

View part

MONROE Wheel suspension track control arm, front L43A30

Front axle track control arm L bottom/transverse front (with a joint (knuckle) with rubber pad) fits: HYUNDAI I10 II, I10 III 1.0/1.0LPG/1.2 08.13-

View part

MONROE Wheel suspension track control arm, front L43A31

Front axle track control arm R bottom front 18 mm fits: KIA RIO III 1.1D-1.6 06.11-

View part

MONROE Wheel suspension track control arm, front L43A32

Front axle track control arm L bottom front 18 mm fits: KIA RIO III 1.1D-1.6 06.11-

View part

MONROE Wheel suspension track control arm, front L43A39

Front axle track control arm R front fits: HYUNDAI I20 ACTIVE, I20 II 1.0-1.4D 11.14-09.21

View part

MONROE Wheel suspension track control arm, front L43A40

Front axle track control arm L front fits: HYUNDAI I20 ACTIVE, I20 II 1.0-1.4D 11.14-09.21

View part

MONROE Wheel suspension track control arm, front L43A45

Front axle track control arm R bottom front fits: HYUNDAI I40 I, I40 I CW 1.6-2.0 07.11-05.19

View part

MONROE Wheel suspension track control arm, front L43A46

Front axle track control arm L front fits: HYUNDAI I40 I, I40 I CW 1.6-2.0 07.11-05.19

View part

MONROE Tie rod end L43G00

Tie rod end R fits: HYUNDAI TUCSON KIA SPORTAGE V 1.6-2.5 10.20-

View part

MONROE Tie rod end L43G01

Tie rod end L fits: HYUNDAI TUCSON KIA SPORTAGE V 1.6-2.5 10.20-

View part

MONROE Tie rod end L43G02

Tie rod end R fits: HYUNDAI BAYON, I20 III 1.0-1.6 08.20-

View part

MONROE Tie rod end L43G03

Tie rod end L fits: HYUNDAI BAYON, I20 III 1.0-1.6 08.20-

View part

MONROE Tie rod end L43G04

Tie rod end R fits: HYUNDAI GRAND SANTA FÉ, SANTA FÉ III KIA SORENTO II 2.0D-3.5 06.09-12.18

View part

MONROE Tie rod end L43G05

Tie rod end L fits: HYUNDAI GRAND SANTA FÉ, SANTA FÉ III KIA SORENTO II 2.0D-3.5 06.09-12.18

View part

MONROE Tie rod end L43G06

Tie rod end R fits: HYUNDAI IONIQ, KONA KIA NIRO, NIRO I, NIRO II 1.0-Electric 03.16-

View part

MONROE Tie rod end L43G07

Tie rod end L fits: HYUNDAI IONIQ, KONA KIA NIRO, NIRO I, NIRO II 1.0-Electric 03.16-

View part

MONROE Tie rod end L43G08

Tie rod end R fits: HYUNDAI GRANDEUR, SANTA FE IV, SANTA FÉ III, SONATA VII 1.6H-3.5 09.14-

View part

Buying with Partios

Buying MONROE parts through Partios

Are these genuine MONROE parts?

Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MONROE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.

Do you supply MONROE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MONROE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MONROE order?

It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MONROE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account