Partios Wholesale catalogue

Monroe Distributor | Suspension & Steering

Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)

12,796 current catalogue lines

About the MONROE range

Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,796 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MONROE Tie rod end L43G09

Tie rod end L fits: HYUNDAI GRANDEUR, SANTA FE IV, SANTA FÉ III, SONATA VII KIA CADENZA II, OPTIMA 1.6H-3.5 09.14-

View part

MONROE Tie rod end L43G10

Tie rod end L/R fits: HYUNDAI COUPE I, EQUUS / CENTENNIAL, GETZ, HIGHWAY, MATRIX, SANTA FÉ I, TRAJET, TRAJET FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.1-4.5 08.96-12.10

View part

MONROE Tie rod end L43G13

Tie rod end R fits: HYUNDAI I20 ACTIVE, I20 II 1.0-1.4D 11.14-09.21

View part

MONROE Tie rod end L43G14

Tie rod end L fits: HYUNDAI I20 ACTIVE, I20 II 1.0-1.4D 11.14-09.21

View part

MONROE Tie rod end L43G15

Tie rod end R fits: HYUNDAI IONIQ 5, IONIQ 6 KIA EV6 Electric 05.21-

View part

MONROE Tie rod end L43G16

Tie rod end L fits: HYUNDAI ELANTRA III, IONIQ 5, IONIQ 6 KIA EV6 1.6/Electric 09.03-

View part

MONROE Tie rod end L43G17

Tie rod end R fits: HYUNDAI TUCSON KIA SPORTAGE V 1.6-2.5 10.20-

View part

MONROE Tie rod end L43G18

Tie rod end L fits: HYUNDAI TUCSON KIA SPORTAGE V 1.6-2.5 10.20-

View part

MONROE Tie rod end L43G19

Tie rod end R fits: KIA EV3, SORENTO IV 1.6H-Electric 03.20-

View part

MONROE Tie rod end L43G20

Tie rod end L fits: KIA SORENTO IV 1.6H/2.2D/2.5 03.20-

View part

MONROE Tie rod end L43G21

Tie rod end R fits: HYUNDAI ACCENT V 1.4 07.18-

View part

MONROE Tie rod end L43G22

Tie rod end L fits: HYUNDAI ACCENT V 1.4 07.18-

View part

MONROE Tie rod end L43G23

Tie rod end R fits: HYUNDAI STARIA 1.6H/2.2D 01.21-

View part

MONROE Tie rod end L43G24

Tie rod end L fits: HYUNDAI STARIA 1.6H/2.2D 01.21-

View part

MONROE Tie rod end L43G25

Tie rod end R fits: HYUNDAI ELANTRA VI, ELANTRA VII, I30, KONA 1.0-Electric 10.15-

View part

MONROE Tie rod end L43G26

Tie rod end L fits: HYUNDAI ELANTRA VI, ELANTRA VII, I30, KONA 1.0-2.0 10.15-

View part

MONROE Tie rod end L43G29

Tie rod end L fits: HYUNDAI KONA 1.0-Electric 04.23-

View part

MONROE Tie rod end L43G30

Tie rod end R fits: HYUNDAI KONA 1.0-Electric 04.23-

View part

MONROE Tie rod (with no end) L43H00

Tie rod (with no end) L/R (length: 264mm) fits: HYUNDAI NEXO, TUCSON KIA SPORTAGE IV 1.6-Electric 06.15-

View part

MONROE Tie rod (with no end) L43H01

Tie rod (with no end) L/R (length: 251,5mm) fits: HYUNDAI TUCSON KIA SPORTAGE V 1.6-2.5 10.20-

View part

MONROE Tie rod (with no end) L43H02

Tie rod (with no end) L/R (length: 248mm) fits: HYUNDAI GRANDEUR, I40 I, I40 I CW, SONATA VII KIA OPTIMA 1.6-3.0 07.11-

View part

MONROE Tie rod (with no end) L43H07

Tie rod (with no end) L/R (length: 250mm) fits: HYUNDAI TUCSON KIA SPORTAGE IV 1.6-2.4 06.15-

View part

MONROE Tie rod (with no end) L43H08

Tie rod (with no end) L/R (length: 261mm) fits: HYUNDAI TUCSON KIA SPORTAGE IV 1.6-2.4 06.15-

View part

MONROE Tie rod (with no end) L43H09

Tie rod (with no end) L/R (length: 253mm) fits: HYUNDAI TUCSON KIA SPORTAGE IV 1.6-2.4 06.15-

View part

MONROE Tie rod end L43H11

L/R (M16x1,5mm/M16x1,5mm, L-324mm) fits: HYUNDAI 1.0 T-GDi, 1.0 T-GDi Hybrid 48V, 1.6 GDi Hybrid, 1.6 T-GDi, 1.6 T-GDi 4WD, 1.6 T-GDi Hybrid, EV, GDi Hybrid

View part

MONROE Tie rod (with no end) L43H17

Tie rod (with no end) L/R fits: HYUNDAI STARIA 1.6H/2.2D 01.21-

View part

MONROE Wheel suspension track control arm, rear L43J00

Rear axle track control arm L/R (top, rear, transverse) fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-2.0 11.11-

View part

MONROE Wheel suspension track control arm, front L43J02

Front axle track control arm R front fits: HYUNDAI SANTA FÉ II KIA SORENTO II 2.0D-3.5 11.05-12.15

View part

MONROE Wheel suspension track control arm, front L43J03

Front axle track control arm L front fits: HYUNDAI SANTA FÉ II KIA SORENTO II 2.0D-3.5 11.05-12.15

View part

MONROE Wheel suspension track control arm, rear L43J04

Rear axle track control arm L/R (bottom, rear, transverse) fits: HYUNDAI TUCSON KIA SPORTAGE II 2.0-2.7 06.04-01.12

View part

MONROE Wheel suspension track control arm, rear L43J05

Rear axle track control arm L (bottom, rear) fits: HYUNDAI SANTA FÉ II KIA SORENTO II 2.0D-3.5 11.05-12.15

View part

MONROE Wheel suspension track control arm, rear L43J06

Rear axle track control arm R (bottom, in the front/middle) fits: HYUNDAI SANTA FÉ II KIA SORENTO II 2.0D-3.5 11.05-12.15

View part

MONROE Front ball joint L43J07

Axle ball joint R (bottom front) (cone diameter 18mm) fits: HYUNDAI SONATA VII, TUCSON KIA OPTIMA, SPORTAGE IV 1.6-2.4 06.10-

View part

MONROE Front ball joint L43J08

Axle ball joint L (bottom front) (cone diameter 18mm) fits: HYUNDAI SONATA VII, TUCSON KIA OPTIMA, SPORTAGE IV 1.6-2.4 06.10-

View part

MONROE Wheel suspension track control arm, front L43J09

Front axle track control arm R front fits: HYUNDAI TUCSON KIA SPORTAGE IV 1.6-2.4 06.15-

View part

MONROE Wheel suspension track control arm, front L43J10

Front axle track control arm L front fits: HYUNDAI TUCSON KIA SPORTAGE IV 1.6-2.4 06.15-

View part

MONROE Wheel suspension track control arm, rear L43J100

Rear axle track control arm L fits: HYUNDAI KONA 1.6/1.6D 06.17-03.23

View part

MONROE Wheel suspension track control arm, front L43J106

Front axle track control arm R front fits: HYUNDAI KONA 1.0-1.6H 04.23-

View part

MONROE Wheel suspension track control arm, front L43J107

Front axle track control arm L front fits: HYUNDAI KONA 1.0-1.6H 04.23-

View part

MONROE Wheel suspension track control arm, front L43J11

Front axle track control arm R front fits: HYUNDAI IONIQ, IONIQ 6, KONA KIA NIRO, NIRO I, NIRO II, SOUL III, SOUL III CARGO 1.0-Electric 03.16-

View part

MONROE Wheel suspension track control arm, front L43J12

Front axle track control arm L front fits: HYUNDAI IONIQ, IONIQ 6, KONA KIA NIRO, NIRO I, NIRO II, SOUL III, SOUL III CARGO 1.0-Electric 03.16-

View part

MONROE Wheel suspension track control arm, front L43J13

Front axle track control arm R transverse front fits: HYUNDAI I40 I, I40 I CW 1.6-2.0 07.11-05.19

View part

MONROE Wheel suspension track control arm, front L43J14

Front axle track control arm L transverse front fits: HYUNDAI I40 I, I40 I CW 1.6-2.0 07.11-05.19

View part

MONROE Wheel suspension track control arm, rear L43J15

Rear axle track control arm L/R (middle/top, rear, transverse) fits: HYUNDAI GRAND SANTA FÉ, IX35, SANTA FÉ III KIA SORENTO II, SORENTO III, SPORTAGE III 2.0-3.5 08.09-12.20

View part

MONROE Wheel suspension track control arm, rear L43J16

Rear axle track control arm R (bottom, rear, transverse) fits: HYUNDAI SANTA FÉ I 2.0-2.7 08.00-03.06

View part

MONROE Wheel suspension track control arm, rear L43J17

Rear axle track control arm L (bottom, rear, transverse) fits: HYUNDAI SANTA FÉ I 2.0-2.7 08.00-03.06

View part

MONROE Wheel suspension track control arm, rear L43J18

Rear axle track control arm R (top, rear, transverse) fits: HYUNDAI SANTA FÉ I 2.0-2.7 08.00-03.06

View part

MONROE Wheel suspension track control arm, rear L43J19

Rear axle track control arm L (top, rear, transverse) fits: HYUNDAI SANTA FÉ I 2.0-2.7 08.00-03.06

View part

Buying with Partios

Buying MONROE parts through Partios

Are these genuine MONROE parts?

Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MONROE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.

Do you supply MONROE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MONROE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MONROE order?

It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MONROE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account