Partios Wholesale catalogue
Monroe Distributor | Suspension & Steering
Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)
12,796 current catalogue lines
About the MONROE range
Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,796 lines on the catalogue, most common applications in this area are covered without needing a second source.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MONROE Steering knuckle silent block L40L03
Knuckle silentblock rear fits: HONDA CR-V II 2.0/2.2D/2.4 09.01-03.07
View partMONROE Front track control arm silent block L40L05
Front track control arm silent block in the back L/R fits: HONDA ACCORD VII, ACCORD VIII 2.0-3.0 09.02-06.15
View partMONROE Stabilizer bar bushing L40L06
Stabilizer bar bushing rear L/R fits: HONDA ACCORD VII 2.0/2.2D/2.4 04.03-05.08
View partMONROE Rear suspension beam silent block L40L07
Rear suspension beam silent block L/R fits: HONDA CIVIC VIII, INSIGHT, JAZZ III, JAZZ IV 1.2-2.2D 09.05-
View partMONROE Stabilizer bar bushing L40L10
Stabilizer bar bushing front L/R (22mm) fits: HONDA CIVIC VIII 1.3-2.2D 09.05-12.13
View partMONROE Stabilizer bar bushing L40L14
Stabilizer bar bushing front L/R (18mm) fits: HONDA INSIGHT, JAZZ III 1.0H-1.5 04.00-12.15
View partMONROE Front track control arm silent block L40L15
Track control arm silent block L/R (x14,2x135 mm) fits: HONDA CR-V IV 1.6D-2.4 01.12-12.18
View partMONROE Stabilizer bar bushing L40L18
Stabilizer bar bushing rear L/R (16,5mm) fits: HONDA CR-V IV 1.6D-2.4 01.12-12.18
View partMONROE Front track control arm silent block L40L19
Track control arm silent block front L/R (x16x44,5/45 mm) fits: HONDA CIVIC IX 1.4-2.4 09.11-
View partMONROE Stabilizer bar bushing L40L20
Stabilizer bar bushing front L/R (16mm) fits: HONDA CIVIC IX 1.4-2.4 09.11-
View partMONROE Front track control arm silent block L40L21
Front track control arm silent block (x14,2x63/67 mm) fits: HONDA CIVIC IX 1.4-2.4 09.11-
View partMONROE Front track control arm silent block L40L22
Track control arm silent block L/R (x12,2x39,7/54 mm) fits: HONDA CIVIC IX, CIVIC VIII 1.3-2.4 09.05-
View partMONROE Front track control arm silent block L40L23
Track control arm silent block in the front (x14,1x63/65 mm) fits: HONDA CIVIC VIII 1.3-1.8ALK 09.05-12.13
View partMONROE Rear wishbone silent block L40L41
Track control arm silent block R (front/in the back) fits: HONDA CR-V V 1.5-2.4 12.16-
View partMONROE Rear wishbone silent block L40L42
Track control arm silent block L (front/in the back) fits: HONDA CR-V V 1.5-2.4 12.16-
View partMONROE Front track control arm silent block L40L43
Front track control arm silent block (x14,2x37,8/59,8 mm) fits: HONDA CR-V V 1.5-2.4 12.16-
View partMONROE Front ball joint L40L44
Axle ball joint L/R (bottom front) (cone diameter 14,25mm) fits: HONDA HR-V 1.5/1.5H/1.6D 01.15-
View partMONROE Front track control arm silent block L40L52
Front track control arm silent block in the front fits: HONDA E Electric 09.19-
View partMONROE Tie rod end L41101
Tie rod end L fits: DAIHATSU TERIOS 1.3-1.5LPG 11.05-12.18
View partMONROE Tie rod end L41102
Tie rod end R fits: DAIHATSU TERIOS 1.3-1.5LPG 11.05-12.18
View partMONROE Tie rod end L4120
Tie rod end R fits: DAIHATSU APPLAUSE I, APPLAUSE II, CHARADE III, CHARADE IV, GRAN MOVE, MATERIA, SIRION, YRV 1.0-1.6 03.87-
View partMONROE Tie rod (with no end) L41204
Tie rod (with no end) L/R (length: 259mm) fits: DAIHATSU MATERIA, SIRION SUBARU JUSTY IV 1.0-1.5LPG 01.05-
View partMONROE Wheel suspension track control arm, front L41505
Front axle track control arm R bottom front fits: DAIHATSU TERIOS 1.3-1.5LPG 11.05-12.18
View partMONROE Wheel suspension track control arm, front L41506
Front axle track control arm L bottom front fits: DAIHATSU TERIOS TOYOTA RUSH 1.3-1.5LPG 11.05-
View partMONROE Front ball joint L41507
Axle ball joint L/R (bottom front) (cone diameter 21,1mm) fits: DAIHATSU TERIOS SUZUKI GRAND VITARA II, LIANA 1.3-2.7 05.97-
View partMONROE Wheel suspension track control arm, front L41509
Front axle track control arm R bottom/transverse front (with a joint (knuckle) with rubber pad) fits: DAIHATSU SIRION, TREVIS SUBARU JUSTY IV 1.0-1.5 01.05-
View partMONROE Wheel suspension track control arm, front L41510
Front axle track control arm L bottom/transverse front (with a joint (knuckle) with rubber pad) fits: DAIHATSU SIRION SUBARU JUSTY IV 1.0-1.5 01.05-
View partMONROE Stabilizer link L41601
Stabilizer link front R 49mm fits: DAIHATSU SIRION SUBARU JUSTY IV TOYOTA BB II 1.0-1.5 01.05-
View partMONROE Stabilizer link L41602
Stabilizer link front L 49mm fits: DAIHATSU SIRION SUBARU JUSTY IV TOYOTA BB II 1.0-1.5 01.05-
View partMONROE Stabilizer link L41603
Stabilizer link front L/R 114mm fits: DAIHATSU TERIOS 1.3-1.5LPG 11.05-12.18
View partMONROE Front track control arm silent block L41801
Front track control arm silent block in the front L/R (14x40x70 mm) fits: DAIHATSU TERIOS 1.3-1.5LPG 11.05-12.18
View partMONROE Wheel suspension track control arm, front L41J00
Front axle track control arm R front fits: DAIHATSU COPEN, CUORE IV, CUORE V, CUORE VI, MOVE 0.7-1.3 01.95-
View partMONROE Wheel suspension track control arm, front L41J01
Front axle track control arm L front fits: DAIHATSU COPEN, CUORE IV, CUORE V, CUORE VI, MOVE 0.7-1.3 01.95-
View partMONROE Wheel suspension track control arm, front L41J02
Front axle track control arm R bottom front fits: DAIHATSU SIRION, YRV 1.0/1.3 04.98-
View partMONROE Wheel suspension track control arm, front L41J03
Front axle track control arm L front fits: DAIHATSU SIRION, YRV 1.0/1.3 04.98-
View partMONROE Front ball joint L42010
Axle ball joint L/R (bottom front) (cone diameter 17mm) fits: VOLVO 440, 460, 480, S40 I, V40 CITROEN C-ZERO HYUNDAI ACCENT II, COUPE I, I20 ACTIVE, I20 I, I20 II, SONATA IV 1.1D-Electric 09.82-
View partMONROE Stabilizer link L42100
Stabilizer link front L/R 137mm fits: MITSUBISHI CARISMA, COLT IV, LANCER IV, LANCER V, SPACE, SPACE STAR 1.3-2.4 04.88-06.06
View partMONROE Tie rod end L42102
Tie rod end L/R fits: HYUNDAI H-1, H-1 / STAREX, H100 MITSUBISHI 3000 GT, L 300 III 1.6-3.0 11.86-12.07
View partMONROE Tie rod end L42103
Tie rod end L/R fits: MITSUBISHI L200, PAJERO CLASSIC, PAJERO II, PAJERO SPORT I 1.8-3.5 12.90-
View partMONROE Tie rod end L42105
Tie rod end R fits: MITSUBISHI L200 / TRITON, PAJERO II, PAJERO III, PAJERO SPORT II 2.2D-3.5 04.00-
View partMONROE Tie rod end L42106
Tie rod end L fits: MITSUBISHI L200 / TRITON, PAJERO II, PAJERO III, PAJERO SPORT II 2.2D-3.5 04.00-
View partMONROE Tie rod end L42108
Tie rod end L/R fits: CITROEN C4 AIRCROSS, C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI ASX, LANCER VIII, OUTLANDER I, OUTLANDER II, OUTLANDER III PEUGEOT 4007, 4008 1.5-3.0 03.01-
View partMONROE Tie rod end L42111
Tie rod end R fits: MITSUBISHI PAJERO IV, PAJERO SPORT II, PAJERO SPORT III 2.4D-3.8 10.06-
View partMONROE Tie rod end L42112
Tie rod end L fits: MITSUBISHI PAJERO IV, PAJERO SPORT II, PAJERO SPORT III 2.4D-3.8 10.06-
View partMONROE Tie rod (with no end) L42208
Tie rod (with no end) L/R (length: 246,8mm) fits: MITSUBISHI ECLIPSE, ECLIPSE I, ECLIPSE II, ECLIPSE III, GALANT IX, GALANT VII, GALANT VIII 1.8-3.8 04.91-
View partMONROE Tie rod (with no end) L42212
Tie rod (with no end) L/R (length: 364mm) fits: MITSUBISHI PAJERO PININ I 1.8/2.0 10.99-06.07
View partMONROE Tie rod (with no end) L42214
Tie rod (with no end) L/R (length: 217,5mm) fits: FIAT FULLBACK MITSUBISHI L200, L200 / TRITON, PAJERO SPORT II, PAJERO SPORT III 2.2D-3.5 01.04-
View partMONROE Tie rod (with no end) L42215
Tie rod (with no end) L/R (length: 206mm) fits: MITSUBISHI PAJERO IV 3.0/3.2D/3.8 10.06-
View partBuying with Partios
Buying MONROE parts through Partios
Are these genuine MONROE parts?
- Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MONROE parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.
Do you supply MONROE parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MONROE parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MONROE order?
- It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MONROE parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account