Partios Wholesale catalogue

Monroe Distributor | Suspension & Steering

Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)

12,796 current catalogue lines

About the MONROE range

Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,796 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MONROE Front ball joint L42500

Axle ball joint (top front) (cone diameter 17,7mm) fits: HYUNDAI GRACE, H-1, H-1 / STAREX, H100 MITSUBISHI DELICA / SPACE GEAR, L 300 III, L400 1.6-2.6DLPG 11.86-

View part

MONROE Front ball joint L42505

Axle ball joint (top front) (cone diameter 18mm) fits: MITSUBISHI L200, PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO PININ I, PAJERO SPORT I 1.8-3.5 12.90-

View part

MONROE Front ball joint L42507

Axle ball joint R (bottom front) (cone diameter 22mm) fits: MITSUBISHI L200, PAJERO CLASSIC, PAJERO II, PAJERO SPORT I 1.8-3.5 12.90-

View part

MONROE Front ball joint L42508

Axle ball joint L (bottom front) (cone diameter 22mm) fits: MITSUBISHI L200, PAJERO CLASSIC, PAJERO II, PAJERO SPORT I 1.8-3.5 12.90-

View part

MONROE Wheel suspension track control arm, front L42519

Front axle track control arm R bottom front fits: MITSUBISHI GALANT VII, GALANT VIII 1.8-2.5 11.92-10.04

View part

MONROE Wheel suspension track control arm, front L42520

Front axle track control arm L bottom front fits: MITSUBISHI GALANT VII, GALANT VIII 1.8-2.5 11.92-10.04

View part

MONROE Wheel suspension track control arm, front L42521

Front axle track control arm R bottom front fits: MITSUBISHI CARISMA, SPACE STAR 1.3-2.0 05.95-06.06

View part

MONROE Wheel suspension track control arm, front L42522

Front axle track control arm L bottom front fits: MITSUBISHI CARISMA, SPACE STAR 1.3-2.0 05.95-06.06

View part

MONROE Wheel suspension track control arm, rear L42527

Rear axle track control arm L/R (bottom, rear, transverse) fits: CITROEN C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI ASX, LANCER VII, LANCER VIII, OUTLANDER II PEUGEOT 4007 1.3-3.0 09.03-

View part

MONROE Wheel suspension track control arm, rear L42528

Rear axle track control arm L/R (top, rear, transverse) fits: CITROEN C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI ASX, LANCER VIII, OUTLANDER II PEUGEOT 4007, 4008 1.5-3.0 11.06-

View part

MONROE Front ball joint L42529

Axle ball joint L/R (bottom front) (cone diameter 21,5mm) fits: FIAT FULLBACK MITSUBISHI L200 / TRITON, PAJERO II, PAJERO III, PAJERO IV, PAJERO PININ I, PAJERO SPORT II 1.8-3.8 10.99-

View part

MONROE Front ball joint L42531

Axle ball joint L/R (top front) (cone diameter 18mm) fits: MITSUBISHI L200, L200 / TRITON, PAJERO II, PAJERO III, PAJERO IV, PAJERO SPORT II 2.5D-3.8 04.00-

View part

MONROE Wheel suspension track control arm, front L42537

Front axle track control arm R top/transverse front (with a joint (knuckle) with rubber pad) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV, PAJERO SPORT II 2.5D-3.8 04.00-

View part

MONROE Wheel suspension track control arm, front L42538

Front axle track control arm L top/transverse front 18 mm (with a joint (knuckle) with rubber pad) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV, PAJERO SPORT II 2.5D-3.8 04.00-

View part

MONROE Wheel suspension track control arm, front L42539

Front axle track control arm R bottom front fits: MITSUBISHI LANCER CARGO, LANCER VII 1.3/1.6/2.0 06.00-12.13

View part

MONROE Wheel suspension track control arm, front L42540

Front axle track control arm L bottom front fits: MITSUBISHI LANCER CARGO, LANCER VII 1.3/1.6/2.0 06.00-12.13

View part

MONROE Front ball joint L42547

Axle ball joint L/R (bottom/outer front) (cone diameter 18mm) fits: MITSUBISHI CARISMA, SPACE STAR 1.3-2.0 05.95-06.06

View part

MONROE Wheel suspension track control arm, rear L42552

Rear axle track control arm L/R fits: CITROEN C4 AIRCROSS, C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI ASX, LANCER VIII, OUTLANDER II PEUGEOT 4007, 4008 1.5-3.0 11.06-

View part

MONROE Stabilizer link L42601

Stabilizer link front L/R 88,2mm fits: MITSUBISHI LANCER IV SUZUKI GRAND VITARA I, VITARA 1.3-2.7 04.88-12.05

View part

MONROE Stabilizer link L42604

Stabilizer link rear L/R 60mm fits: MITSUBISHI GALANT VIII 2.0-2.5 09.96-10.04

View part

MONROE Stabilizer link L42617

Stabilizer link front R 78mm fits: MITSUBISHI PAJERO III 2.5D-3.5 04.00-09.07

View part

MONROE Stabilizer link L42618

Stabilizer link front L 78mm fits: MITSUBISHI PAJERO III 2.5D-3.5 04.00-09.07

View part

MONROE Stabilizer link L42619

Stabilizer link rear R 115mm fits: MITSUBISHI PAJERO II, PAJERO III, PAJERO IV, PAJERO SPORT II 2.5D-3.8 04.00-

View part

MONROE Stabilizer link L42620

Stabilizer link rear L 115mm fits: MITSUBISHI PAJERO II, PAJERO III, PAJERO IV, PAJERO SPORT II 2.5D-3.8 04.00-

View part

MONROE Stabilizer link L42625

Stabilizer link front R 65mm fits: MITSUBISHI L200, L200 / TRITON, PAJERO SPORT II 2.5D-3.5 01.04-

View part

MONROE Stabilizer link L42626

Stabilizer link front L 65mm fits: MITSUBISHI L200, L200 / TRITON, PAJERO SPORT II 2.0-3.5 06.96-

View part

MONROE Stabilizer link L42627

Stabilizer link front R 78mm fits: MITSUBISHI PAJERO IV, PAJERO SPORT II, PAJERO SPORT III 2.4D-3.8 10.06-

View part

MONROE Stabilizer link L42628

Stabilizer link front L 78mm fits: MITSUBISHI PAJERO IV, PAJERO SPORT II, PAJERO SPORT III 2.4D-3.8 10.06-

View part

MONROE Stabilizer link L42629

Stabilizer link front L/R 127mm fits: MITSUBISHI MIRAGE / SPACE STAR VI, MIRAGE VI 1.0/1.2/1.2LPG 01.12-

View part

MONROE Front track control arm silent block L42802

Front track control arm silent block in the back L/R fits: MITSUBISHI GALANT VII, GALANT VIII 1.8-2.5 11.92-10.04

View part

MONROE Front track control arm silent block L42804

Front track control arm silent block in the back L/R (14,2x60,2x53,7 mm) fits: CITROEN C4 AIRCROSS, C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI ASX, LANCER CARGO, LANCER VII 1.3-3.0 06.00-

View part

MONROE Front track control arm silent block L42805

Front track control arm silent block in the front L/R fits: MITSUBISHI LANCER CARGO, LANCER VII, OUTLANDER I, OUTLANDER II 1.3-2.4 06.00-12.13

View part

MONROE Stabilizer bar bushing L42806

Stabilizer bar bushing front L/R (20mm) fits: MITSUBISHI L200, PAJERO SPORT I 1.8-3.0 01.96-

View part

MONROE Tie rod end L42G00

Tie rod end L/R fits: MITSUBISHI ECLIPSE CROSS 1.5-2.4H 10.17-

View part

MONROE Tie rod end L42G01

Tie rod end L/R fits: MITSUBISHI MIRAGE / SPACE STAR VI, MIRAGE VI 1.0/1.2/1.2LPG 01.12-

View part

MONROE Tie rod end L42G06

Tie rod end L fits: MITSUBISHI OUTLANDER IV 2.4H/2.5 06.21-

View part

MONROE Tie rod end L42G07

Tie rod end R fits: MITSUBISHI OUTLANDER IV 2.4H/2.5 06.21-

View part

MONROE Tie rod (with no end) L42H00

Tie rod (with no end) L/R (length: 224,5mm) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III 2.5D-3.5 04.00-

View part

MONROE Tie rod (with no end) L42H02

Tie rod (with no end) L/R (length: 361mm) fits: MITSUBISHI MIRAGE / SPACE STAR VI, MIRAGE VI 1.0/1.2/1.2LPG 01.12-

View part

MONROE Tie rod (with no end) L42H03

Tie rod (with no end) L/R (length: 230,5mm) fits: MITSUBISHI OUTLANDER IV NISSAN QASHQAI III RENAULT AUSTRAL, ESPACE VI, RAFALE 1.2H-2.5 04.21-

View part

MONROE Wheel suspension track control arm, front L42J00

Front axle track control arm R in the front/top/transverse front fits: MITSUBISHI L200, L200 / TRITON, PAJERO SPORT II 2.5D/3.0/3.2D 01.04-

View part

MONROE Wheel suspension track control arm, front L42J01

Front axle track control arm L in the front/top/transverse front fits: MITSUBISHI L200, L200 / TRITON, PAJERO SPORT II 2.5D/3.0/3.2D 01.04-

View part

MONROE Wheel suspension track control arm, rear L42J07

Rear axle track control arm L/R (rear, transverse) fits: CITROEN C4 AIRCROSS MITSUBISHI ASX, LANCER VIII, OUTLANDER II, OUTLANDER III PEUGEOT 4008 1.5-3.0 11.06-

View part

MONROE Wheel suspension track control arm, front L42J08

Front axle track control arm R front fits: MITSUBISHI PAJERO IV, PAJERO SPORT II 3.0-3.8 10.06-

View part

MONROE Wheel suspension track control arm, front L42J09

Front axle track control arm L front fits: MITSUBISHI PAJERO IV, PAJERO SPORT II 3.0-3.8 10.06-

View part

MONROE Wheel suspension track control arm, front L42J10

Front axle track control arm R bottom front fits: MITSUBISHI PAJERO II, PAJERO III 2.5D-3.5 04.00-09.07

View part

MONROE Wheel suspension track control arm, front L42J11

Front axle track control arm L bottom front fits: MITSUBISHI PAJERO II, PAJERO III 2.5D-3.5 04.00-09.07

View part

MONROE Wheel suspension track control arm, front L42J12

Front axle track control arm R front fits: MITSUBISHI MIRAGE / SPACE STAR VI, MIRAGE VI 1.0/1.2/1.2LPG 01.12-

View part

Buying with Partios

Buying MONROE parts through Partios

Are these genuine MONROE parts?

Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MONROE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.

Do you supply MONROE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MONROE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MONROE order?

It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MONROE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account