Partios Wholesale catalogue

Monroe Distributor | Suspension & Steering

Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)

12,796 current catalogue lines

About the MONROE range

Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,796 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MONROE Tie rod (with no end) L18H07

Tie rod (with no end) L/R (length: 318,5mm) fits: HYUNDAI ELANTRA VI, ELANTRA VII, I30, IONIQ, KONA KIA CEED, NIRO, NIRO I, NIRO II, PROCEED, XCEED 1.0-Electric 10.15-

View part

MONROE Tie rod (with no end) L18H09

Tie rod (with no end) L/R (length: 233mm) fits: KIA CARENS IV, CARNIVAL IV 1.6-3.5 03.13-

View part

MONROE Tie rod (with no end) L18H11

Tie rod (with no end) L/R (length: 295mm) fits: HYUNDAI ACCENT V, SOLARIS KIA RIO IV, STONIC 1.0-1.6D 01.17-

View part

MONROE Tie rod (with no end) L18H14

Tie rod (with no end) L/R (length: 211mm) fits: KIA PICANTO II 1.0/1.0LPG/1.2 05.11-03.17

View part

MONROE Tie rod (with no end) L18H15

Tie rod (with no end) L/R (length: 270,5mm) fits: KIA SORENTO III 2.0D-3.5 01.15-12.20

View part

MONROE Tie rod (with no end) L18H20

Tie rod (with no end) fits: KIA RIO II 1.4/1.5D/1.6 03.05-12.11

View part

MONROE Wheel suspension track control arm, front L18J00

Front axle track control arm R front fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-2.0 11.11-

View part

MONROE Wheel suspension track control arm, front L18J01

Front axle track control arm L front fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-2.0 11.11-

View part

MONROE Wheel suspension track control arm, rear L18J02

Rear axle track control arm L/R (bottom, rear, transverse) fits: HYUNDAI IX35, TUCSON KIA SPORTAGE II 2.0-2.7 06.04-12.15

View part

MONROE Wheel suspension track control arm, front L18J06

Front axle track control arm R top front fits: KIA SORENTO I 2.5D/3.3 08.02-12.11

View part

MONROE Wheel suspension track control arm, front L18J07

Front axle track control arm L top front fits: KIA SORENTO I 2.4-3.5 08.02-12.11

View part

MONROE Wheel suspension track control arm, front L18J08

Front axle track control arm L bottom front fits: KIA CARNIVAL III 2.2D/2.7/2.9D 04.06-06.15

View part

MONROE Wheel suspension track control arm, front L18J10

Front axle track control arm R front fits: KIA SOUL I 1.6/1.6D/1.6LPG 02.09-12.14

View part

MONROE Wheel suspension track control arm, front L18J11

Front axle track control arm L bottom front fits: KIA SOUL I 1.6/1.6D/1.6LPG 02.09-12.14

View part

MONROE Front ball joint L18J12

Axle ball joint L/R (bottom/inner front) fits: KIA PICANTO II, PICANTO III, RIO III, RIO IV, SELTOS, SOUL I, SOUL III, STONIC 1.0-2.0 02.09-

View part

MONROE Wheel suspension track control arm, rear L18J13

Rear axle track control arm R fits: KIA CARNIVAL III 2.2D/2.7/2.9D 04.06-06.15

View part

MONROE Wheel suspension track control arm, rear L18J14

Rear axle track control arm L fits: KIA CARNIVAL III 2.2D/2.7/2.9D 04.06-06.15

View part

MONROE Wheel suspension track control arm, front L18J15

Front axle track control arm R front fits: KIA PICANTO III 1.0/1.0LPG/1.2 03.17-

View part

MONROE Wheel suspension track control arm, front L18J16

Front axle track control arm L front fits: KIA PICANTO III 1.0/1.0LPG/1.2 03.17-

View part

MONROE Wheel suspension track control arm, front L18J17

Front axle track control arm R front fits: KIA SORENTO III 2.0D-3.5 01.15-12.20

View part

MONROE Wheel suspension track control arm, front L18J18

Front axle track control arm L front fits: KIA SORENTO III 2.0D-3.5 01.15-12.20

View part

MONROE Wheel suspension track control arm, front L18J20

Front axle track control arm R front fits: KIA SOUL I 1.6/1.6D/1.6LPG 02.09-12.14

View part

MONROE Wheel suspension track control arm, front L18J21

Front axle track control arm L front fits: KIA SOUL I 1.6/1.6D/1.6LPG 02.09-12.14

View part

MONROE Wheel suspension track control arm, rear L18J22

Rear axle track control arm R (front) fits: HYUNDAI IONIQ KIA NIRO, NIRO I 1.6H 03.16-

View part

MONROE Wheel suspension track control arm, rear L18J23

Rear axle track control arm L (front) fits: HYUNDAI IONIQ KIA NIRO, NIRO I 1.6H 03.16-

View part

MONROE Wheel suspension track control arm, rear L18J24

Rear axle track control arm R fits: KIA SORENTO III, SORENTO IV 1.6H-3.5 01.15-

View part

MONROE Wheel suspension track control arm, rear L18J25

Rear axle track control arm L fits: KIA SORENTO III, SORENTO IV 1.6H-3.5 01.15-

View part

MONROE Front ball joint L18J26

Axle ball joint (front) (cone diameter 18mm) fits: KIA SORENTO III 2.0D-3.5 01.15-12.20

View part

MONROE Wheel suspension track control arm, front L18J27

Front axle track control arm R front fits: KIA CARENS IV, CARNIVAL IV 1.6-3.5 03.13-

View part

MONROE Wheel suspension track control arm, front L18J28

Front axle track control arm L front fits: KIA CARENS IV, CARNIVAL IV 1.6-3.5 03.13-

View part

MONROE Front ball joint L18J31

Axle ball joint L/R (bottom/inner front) fits: KIA PICANTO III, RIO III 1.0-1.4D 09.11-

View part

MONROE Wheel suspension track control arm, rear L18J39

Rear axle track control arm L/R fits: HYUNDAI GRAND SANTA FÉ, IX35, SANTA FÉ III, TUCSON KIA SORENTO II, SORENTO III, SPORTAGE III, SPORTAGE IV 1.6-3.5 08.09-

View part

MONROE Wheel suspension track control arm, front L18J51

Front axle track control arm L front fits: KIA STONIC 1.0-1.6D 07.17-

View part

MONROE Wheel suspension track control arm, front L18J52

Front axle track control arm R front fits: KIA SORENTO IV 1.6H/2.2D/2.5 03.20-

View part

MONROE Wheel suspension track control arm, front L18J53

Front axle track control arm L front fits: KIA SORENTO IV 1.6H/2.2D/2.5 03.20-

View part

MONROE Wheel suspension track control arm, rear L18J54

Rear axle track control arm fits: GENESIS GV60 Electric 10.21-

View part

MONROE Wheel suspension track control arm, rear L18J55

Rear axle track control arm fits: GENESIS GV60 Electric 10.21-

View part

MONROE Stabilizer link L18K03

Stabilizer link front R 337mm fits: HYUNDAI IONIQ 5, IONIQ 6 KIA EV6 Electric 05.21-

View part

MONROE Stabilizer link L18K04

Stabilizer link front L 337mm fits: HYUNDAI IONIQ 5, IONIQ 6 KIA EV6 Electric 05.21-

View part

MONROE Stabilizer link L18K09

Stabilizer link front L/R 250mm fits: KIA PICANTO III 1.0/1.0LPG/1.2 03.17-

View part

MONROE Stabilizer link L18K12

Stabilizer link front L/R 326mm fits: KIA CARNIVAL IV, SORENTO II 2.0D-3.5 06.09-

View part

MONROE Stabilizer link L18K13

Stabilizer link rear R fits: KIA SELTOS 1.6/2.0 08.19-

View part

MONROE Stabilizer link L18K14

Stabilizer link rear L fits: KIA SELTOS 1.6/2.0 08.19-

View part

MONROE Front track control arm silent block L18L03

Front track control arm silent block in the front L/R (x14,3x59,85/66,1 mm) fits: HYUNDAI I20 I, I40 I, I40 I CW, TUCSON KIA CARNIVAL III, PICANTO II, SPORTAGE II 1.0-2.9D 06.04-05.19

View part

MONROE Stabilizer bar bushing L18L04

Stabilizer bar bushing rear L/R (15mm) fits: HYUNDAI IX55, SANTA FÉ I, SANTA FÉ II KIA SORENTO II 2.0-3.8 08.00-12.15

View part

MONROE Stabilizer bar bushing L18L06

Stabilizer bar bushing front L/R (20mm) fits: HYUNDAI ACCENT V, CRETA, GRANDEUR, I10 II, I20 III, I30, I40 I, I40 I CW, SOLARIS, SONATA VI KIA CADENZA I, CERATO II, CERATO III, OPTIMA 1.0-3.5 01.09-

View part

MONROE Stabilizer bar bushing L18L07

Stabilizer bar bushing front L/R (21mm) fits: HYUNDAI BAYON, CRETA, ELANTRA VI, GRAND SANTA FÉ, I20 ACTIVE, I20 II, I20 III, I30, IONIQ, KONA, SANTA FÉ III, STARIA, TUCSON 1.0-Electric 11.09-

View part

MONROE Stabilizer bar bushing L18L11

front L/R (21mm) fits: KIA PICANTO I 1.0-1.1LPG 04.04-09.11

View part

Buying with Partios

Buying MONROE parts through Partios

Are these genuine MONROE parts?

Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MONROE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.

Do you supply MONROE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MONROE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MONROE order?

It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MONROE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account