Partios Wholesale catalogue
Monroe Distributor | Suspension & Steering
Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)
12,796 current catalogue lines
About the MONROE range
Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,796 lines on the catalogue, most common applications in this area are covered without needing a second source.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MONROE Stabilizer bar bushing L18L18
Stabilizer bar bushing rear L/R (14mm) fits: KIA CEE'D 1.4-2.0D 12.06-12.12
View partMONROE Tie rod end L20105
Tie rod end L/R fits: ISUZU D-MAX I, D-MAX II 1.9D/2.5D/3.0D 05.02-
View partMONROE Front ball joint L20503
Axle ball joint L/R (bottom front) (cone diameter 22,5mm) fits: ISUZU D-MAX I, D-MAX II, KB, TROOPER I, TROOPER II, TROOPER III OPEL CAMPO, FRONTERA A, FRONTERA A SPORT 2.0-3.5 10.87-12.18
View partMONROE Stabilizer link L20600
Stabilizer link front L/R 160mm fits: PORSCHE PANAMERA 3.0-4.8 07.09-10.16
View partMONROE Stabilizer link L20601
Stabilizer link rear L/R 150mm fits: AUDI E-TRON GT PORSCHE PANAMERA, PANAMERA SPORT TURISMO, TAYCAN, TAYCAN CROSS TURISMO, TAYCAN SPORT TURISMO 2.9-Electric 07.09-
View partMONROE Tie rod end L20G00
Tie rod end L/R fits: ISUZU D-MAX I, D-MAX II 1.9D/2.5D/3.0D 05.02-12.22
View partMONROE Tie rod (with no end) L20H00
Tie rod (with no end) L/R (length: 311mm) fits: ISUZU D-MAX I, RODEO 2.2-3.2 09.97-12.12
View partMONROE Tie rod (with no end) L20H01
Tie rod (with no end) L/R (length: 337mm) fits: ISUZU D-MAX II 1.9D/2.5D 04.12-
View partMONROE Wheel suspension track control arm, front L20J00
Front axle track control arm R top front fits: ISUZU D-MAX II 1.9D/2.5D 04.12-
View partMONROE Wheel suspension track control arm, front L20J01
Front axle track control arm L top front fits: ISUZU D-MAX II 1.9D/2.5D 04.12-
View partMONROE Wheel suspension track control arm, front L20J04
Front axle track control arm L/R top front fits: IVECO DAILY VI 2.3D-Electric 03.14-
View partMONROE Front ball joint L20J05
Axle ball joint (bottom/inner front) fits: ISUZU D-MAX I, D-MAX II, D-MAX III, KB, TROOPER II, TROOPER III 1.9D-3.5 12.90-
View partMONROE Front ball joint L20J06
Axle ball joint (top front) fits: ISUZU D-MAX I, D-MAX II 1.9D/2.5D/3.0D 05.02-
View partMONROE Front ball joint L20J07
Axle ball joint L/R (top front) fits: ISUZU D-MAX I, D-MAX II 1.9D/2.5D/3.0D 05.02-
View partMONROE Stabilizer link L20K00
Stabilizer link front L fits: ISUZU D-MAX I, D-MAX II, D-MAX III 1.9D/2.5D/3.0D 05.02-
View partMONROE Stabilizer link L20K01
Stabilizer link front R fits: ISUZU D-MAX I, D-MAX II, D-MAX III 1.9D/2.5D/3.0D 05.02-
View partMONROE Stabilizer link L20K03
Stabilizer link front R fits: ISUZU D-MAX III 1.9D 11.19-
View partMONROE Stabilizer link L20K04
Stabilizer link front L fits: ISUZU D-MAX III 1.9D 11.19-
View partMONROE Stabilizer bar bushing L20L00
Stabilizer bar bushing rear L/R (22mm) fits: IVECO DAILY I, DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI 2.3D-Electric 01.85-
View partMONROE Tie rod end L21100
Tie rod end L/R fits: CHEVROLET EPICA, EVANDA DAEWOO EVANDA, LEGANZA, NUBIRA, TOSCA 1.6-2.5 04.97-
View partMONROE Tie rod end L21101
Tie rod end L/R fits: CHEVROLET MATIZ, SPARK DAEWOO MATIZ 0.8-1.0LPG 09.98-
View partMONROE Tie rod end L21103
Tie rod end R fits: CHEVROLET AVEO / KALOS DAEWOO KALOS 1.2-1.6 09.02-
View partMONROE Tie rod end L21104
Tie rod end L fits: CHEVROLET AVEO / KALOS DAEWOO KALOS 1.2-1.6 09.02-
View partMONROE Tie rod end L21107
Tie rod end R fits: CHEVROLET LACETTI, NUBIRA DAEWOO LACETTI, NUBIRA 1.4-2.0D 05.03-
View partMONROE Tie rod end L21108
Tie rod end L fits: CHEVROLET LACETTI, NUBIRA DAEWOO LACETTI, NUBIRA 1.4-2.0D 05.03-
View partMONROE Tie rod end L21109
Tie rod end L/R fits: CHEVROLET SPARK 1.0-Electric 12.09-
View partMONROE Tie rod (with no end) L21202
Tie rod (with no end) L/R (length: 253mm) fits: CHEVROLET MATIZ DAEWOO MATIZ 0.8/1.0 09.98-
View partMONROE Tie rod (with no end) L21206
Tie rod (with no end) L/R (length: 262mm) fits: CHEVROLET SPARK 1.0-Electric 12.09-
View partMONROE Front ball joint L21505
Axle ball joint (front) (cone diameter 17,3mm) fits: CHEVROLET AVEO / KALOS DAEWOO KALOS 1.2-1.6 09.02-
View partMONROE Front ball joint L21506
Axle ball joint (front) (cone diameter 18mm) fits: VOLVO V50 CHEVROLET LACETTI, NUBIRA DAEWOO LACETTI, NUBIRA FORD FOCUS II 1.4-2.4D 05.03-
View partMONROE Wheel suspension track control arm, front L21511
Front axle track control arm R bottom front 18 mm fits: CHEVROLET LACETTI, NUBIRA DAEWOO LACETTI, NUBIRA 1.4-2.0D 05.03-
View partMONROE Wheel suspension track control arm, front L21512
Front axle track control arm L bottom front 18 mm fits: CHEVROLET LACETTI, NUBIRA DAEWOO LACETTI, NUBIRA 1.4-2.0D 05.03-
View partMONROE Wheel suspension track control arm, front L21513
Front axle track control arm R bottom front fits: CHEVROLET AVEO / KALOS DAEWOO KALOS 1.2-1.6 09.02-
View partMONROE Wheel suspension track control arm, front L21514
Front axle track control arm L bottom front 14,7 mm fits: CHEVROLET AVEO / KALOS DAEWOO KALOS 1.2-1.6 09.02-
View partMONROE Wheel suspension track control arm, front L21515
Front axle track control arm R bottom front 20 mm fits: CHEVROLET CRUZE, VOLT OPEL AMPERA, ASTRA J, ZAFIRA C 1.3D-2.0D 05.09-
View partMONROE Wheel suspension track control arm, front L21516
Front axle track control arm L bottom/transverse front 20 mm (with a joint (knuckle) with rubber pad) fits: CHEVROLET CRUZE, VOLT OPEL AMPERA, ASTRA J 1.3D-2.0D 05.09-
View partMONROE Wheel suspension track control arm, front L21517
Front axle track control arm R bottom/transverse front 16 mm (with a joint (knuckle) with rubber pad) fits: CHEVROLET SPARK 1.0-Electric 12.09-
View partMONROE Wheel suspension track control arm, front L21518
Front axle track control arm L bottom/transverse front 16 mm (with a joint (knuckle) with rubber pad) fits: CHEVROLET SPARK 1.0-Electric 12.09-
View partMONROE Front ball joint L21526
Axle ball joint (front) (cone diameter 18mm) fits: BUICK ENCORE CHEVROLET AVEO, AVEO / KALOS, TRAX OPEL MOKKA / MOKKA X 1.2-1.8 05.03-
View partMONROE Stabilizer link L21606
Stabilizer link front L/R 262mm fits: CHEVROLET AVEO / KALOS, REZZO DAEWOO KALOS, NUBIRA, TACUMA / REZZO 1.2-2.0 06.99-
View partMONROE Stabilizer link L21607
Stabilizer link front R 271,5mm fits: CHEVROLET LACETTI, NUBIRA DAEWOO LACETTI, NUBIRA 1.4-2.0D 05.03-
View partMONROE Stabilizer link L21608
Stabilizer link front L 271,5mm fits: CHEVROLET LACETTI, NUBIRA DAEWOO LACETTI, NUBIRA 1.4-2.0D 05.03-
View partMONROE Stabilizer link L21610
Stabilizer link front L/R 235mm fits: CHEVROLET SPARK 1.0-Electric 12.09-
View partMONROE Stabilizer link L21611
Stabilizer link front L/R 295mm fits: CHEVROLET AVEO 1.2-1.6 03.11-
View partMONROE Front track control arm silent block L21800
Front track control arm silent block rear L/R (12x60x46 mm) fits: CHEVROLET AVEO, AVEO / KALOS, SPARK DAEWOO KALOS 0.8-1.6 09.00-
View partMONROE Tie rod end L21G00
Tie rod end L/R fits: CHEVROLET AVEO 1.2-1.6 03.11-
View partMONROE Tie rod end L21G01
Tie rod end L/R fits: CHEVROLET MATIZ, SPARK DAEWOO MATIZ, TICO 0.8-1.0LPG 02.95-
View partMONROE Tie rod end L21G02
Tie rod end L/R fits: DAEWOO KORANDO, MUSSO SSANGYONG KORANDO, MUSSO, MUSSO SPORTS 2.0-3.2 10.95-
View partBuying with Partios
Buying MONROE parts through Partios
Are these genuine MONROE parts?
- Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MONROE parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.
Do you supply MONROE parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MONROE parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MONROE order?
- It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MONROE parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account