Partios Wholesale catalogue

Monroe Distributor | Suspension & Steering

Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)

12,624 current catalogue lines

About the MONROE range

Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,624 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MONROE Wheel suspension track control arm, front L15567

Front axle track control arm R bottom front fits: FIAT BRAVO, BRAVO II, STILO LANCIA DELTA III 1.2-2.4 10.01-12.16

View part

MONROE Wheel suspension track control arm, front L15568

Front axle track control arm L bottom front fits: FIAT BRAVO, BRAVO II, STILO LANCIA DELTA III 1.2-2.4 10.01-12.16

View part

MONROE Front ball joint L15569

Axle ball joint (front) (cone diameter 17mm) fits: FIAT BRAVO, BRAVO II, STILO LANCIA DELTA III 1.2-2.4 10.01-12.16

View part

MONROE Wheel suspension track control arm, front L15571

Front axle track control arm R bottom front fits: FIAT DOBLO 1.2-1.9D 03.01-

View part

MONROE Wheel suspension track control arm, front L15572

Front axle track control arm L bottom front fits: FIAT DOBLO 1.2-1.9D 03.01-

View part

MONROE Wheel suspension track control arm, front L15573

Front axle track control arm R bottom front fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO, COMBO TOUR 1.3D-2.0D 01.10-

View part

MONROE Wheel suspension track control arm, front L15574

Front axle track control arm L bottom front fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO, COMBO TOUR 1.3D-2.0D 01.10-

View part

MONROE Wheel suspension track control arm, front L15575

Front axle track control arm R top front fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V 2.3D-Electric 05.99-02.14

View part

MONROE Wheel suspension track control arm, front L15576

Front axle track control arm L top front fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V 2.3D-Electric 05.99-02.14

View part

MONROE Wheel suspension track control arm, front L15577

Front axle track control arm R bottom front fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V 2.3D-Electric 05.99-02.14

View part

MONROE Wheel suspension track control arm, front L15578

Front axle track control arm L bottom front fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V 2.3D-Electric 05.99-02.14

View part

MONROE Wheel suspension track control arm, front L15579

Front axle track control arm R bottom/transverse front (with rubber pad) fits: DODGE JOURNEY FIAT FREEMONT 2.0D-3.6ALK 06.08-

View part

MONROE Wheel suspension track control arm, front L15580

Front axle track control arm L bottom/transverse front (with rubber pad) fits: DODGE JOURNEY FIAT FREEMONT 2.0D-3.6ALK 06.08-

View part

MONROE Front ball joint L15581

Axle ball joint L/R (outer front) (cone diameter 19mm) fits: CHRYSLER SEBRING DODGE AVENGER, JOURNEY FIAT FREEMONT JEEP CHEROKEE LANCIA FLAVIA 2.0-3.6ALK 09.06-

View part

MONROE Front ball joint L15582

Axle ball joint L/R (front) (cone diameter 21,6mm) fits: IVECO DAILY I, DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI 2.3D-Electric 01.78-

View part

MONROE Wheel suspension track control arm, front L15583

Front axle track control arm R bottom/transverse front (with a joint (knuckle) with rubber pad) fits: FIAT PANDA 0.9-1.3D 02.12-

View part

MONROE Wheel suspension track control arm, front L15584

Front axle track control arm L bottom/transverse front (with a joint (knuckle) with rubber pad) fits: FIAT PANDA 0.9-1.3D 02.12-

View part

MONROE Wheel suspension track control arm, front L15585

Front axle track control arm R bottom/transverse front (with a joint (knuckle) with rubber pad) fits: FIAT 500L, DOBLO, DOBLO CARGO 0.9-2.0D 01.10-

View part

MONROE Wheel suspension track control arm, front L15586

Front axle track control arm L bottom front 18 mm fits: FIAT 500L 0.9-1.6D 09.12-

View part

MONROE Front ball joint L15587

Axle ball joint L/R (bottom front) (cone diameter 17mm) fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C FIAT 500, 500 C, 500E, PANDA LANCIA YPSILON 0.9-Electric 07.07-

View part

MONROE Wheel suspension track control arm, front L15593

Front axle track control arm R bottom/transverse front 17 mm (with a joint (knuckle) with rubber pad) fits: FIAT 500 LANCIA YPSILON 0.9-1.3D 05.11-

View part

MONROE Wheel suspension track control arm, front L15594

Front axle track control arm L bottom/transverse front (with a joint (knuckle) with rubber pad) fits: FIAT 500 LANCIA YPSILON 0.9-1.3D 05.11-

View part

MONROE Wheel suspension track control arm, front L15595

Front axle track control arm R front 19 mm fits: FIAT 500X JEEP COMPASS, RENEGADE 1.0-2.4 07.14-

View part

MONROE Wheel suspension track control arm, front L15596

Front axle track control arm L front 19 mm fits: FIAT 500X JEEP COMPASS, RENEGADE 1.0-2.4 07.14-

View part

MONROE Stabilizer link L15600

Stabilizer link front L/R 275mm fits: FIAT MAREA, MULTIPLA LANCIA DEDRA, LYBRA 1.2-2.4D 04.89-06.10

View part

MONROE Stabilizer link L15601

Stabilizer link front L/R 100mm fits: ALFA ROMEO 145, 146, 155, GTV, SPIDER FIAT BRAVA, BRAVO I, COUPE, TEMPRA, TIPO LANCIA DEDRA, DELTA II 1.1-3.2 07.87-10.05

View part

MONROE Stabilizer link L15602

Stabilizer link rear L/R 118mm fits: FIAT DOBLO 1.2-1.9D 03.01-

View part

MONROE Stabilizer link L15603

Stabilizer link front L/R 290mm/325mm fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C, 500E CITROEN C3 ORIGIN III FIAT 500, 500 C, 500E, BRAVO, BRAVO II, PANDA, STILO 0.9-Electric 10.01-

View part

MONROE Stabilizer link L15604

Stabilizer link front L/R 315mm fits: FIAT PANDA 1.1-1.4CNG 09.03-

View part

MONROE Stabilizer link L15608

Stabilizer link front/rear L/R 280mm fits: ALFA ROMEO TONALE FIAT 500X, TIPO JEEP COMPASS, RENEGADE 1.0-2.4 07.14-

View part

MONROE Stabilizer link L15610

Stabilizer link front L (L-50mm) fits: IVECO DAILY III, DAILY IV 8140.43B-F1CE3481L 05.99-08.11

View part

MONROE Stabilizer link L15611

Stabilizer link rear L/R 82mm/113mm fits: FIAT PANDA 1.2/1.3D 09.04-

View part

MONROE Stabilizer link L15612

Stabilizer link rear L/R (L-100mm) fits: IVECO DAILY II, DAILY III 8140.23-F1CE0481E 05.99-07.07

View part

MONROE Stabilizer link L15615

Stabilizer link front L/R 297mm fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO, COMBO TOUR 1.3D-2.0D 01.10-

View part

MONROE Stabilizer link L15616

Stabilizer link rear L/R 86mm fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO, COMBO TOUR 1.3D-2.0D 01.10-

View part

MONROE Stabilizer link L15617

Stabilizer link front L/R 265mm fits: FIAT FREEMONT LANCIA FLAVIA 2.0D/2.4/3.6 08.11-12.16

View part

MONROE Stabilizer link L15618

Stabilizer link rear L/R 80mm fits: DODGE JOURNEY FIAT FREEMONT 2.0D-3.6ALK 06.08-

View part

MONROE Stabilizer link L15619

Stabilizer link rear L/R 130mm fits: IVECO DAILY II, DAILY III, DAILY IV 2.3D-3.0D 05.99-03.12

View part

MONROE Front ball joint L1562

Axle ball joint L/R (bottom front) (cone diameter 14mm) fits: FIAT DUNA, ELBA, PANDA, UNO LANCIA Y10 SEAT MARBELLA, TERRA 0.65-1.9D 10.80-

View part

MONROE Stabilizer link L15620

Stabilizer link rear L/R 130mm fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V 2.3D-Electric 05.99-02.14

View part

MONROE Stabilizer link L15621

Stabilizer link rear L/R 130mm fits: IVECO DAILY IV, DAILY V 2.3D-Electric 05.06-02.14

View part

MONROE Stabilizer link L15622

Stabilizer link rear L/R 184mm fits: FIAT 500X JEEP COMPASS, RENEGADE 1.3-2.4 07.14-

View part

MONROE Tie rod end L1566

Tie rod end L/R fits: FIAT 127, 147, CINQUECENTO, DUNA, ELBA, FIORINO, REGATA, RITMO, SEICENTO / 600, UNO LANCIA Y10 SEAT FURA, IBIZA I, MALAGA, RONDA 0.7-Electric 06.71-01.10

View part

MONROE Tie rod (with no end) L1568

Tie rod (with no end) L/R (length: 192mm) fits: FIAT 127, 128, 147, DUNA, ELBA, FIORINO, PANDA, UNO, X 1/9 INNOCENTI ELBA LANCIA A 112, Y10 SEAT FURA, MARBELLA, TERRA 0.65-1.7D 03.69-07.04

View part

MONROE Tie rod end L1569

Tie rod end L/R fits: ABARTH RITMO FIAT CINQUECENTO, REGATA, RITMO, SEICENTO / 600 LANCIA A 112 SEAT IBIZA I, MALAGA, RITMO, RONDA 0.7-Electric 01.78-01.10

View part

MONROE Tie rod (with no end) L1570

Tie rod (with no end) L/R (length: 279,5mm) fits: ABARTH RITMO FIAT BRAVA, BRAVO I, DUNA, REGATA, RITMO, TEMPRA, TIPO, UNO LANCIA DEDRA, DELTA I, PRISMA SEAT IBIZA I, MALAGA 0.9-2.0 01.78-06.06

View part

MONROE Tie rod end L1571

Tie rod end L/R fits: FIAT PANDA SEAT MARBELLA, TERRA 0.65-1.4D 10.80-07.04

View part

MONROE Wheel suspension track control arm, front L1572

Front axle track control arm L/R bottom front fits: FIAT PANDA LANCIA Y10 SEAT MARBELLA, TERRA 0.65-1.4D 10.80-07.04

View part

Buying with Partios

Buying MONROE parts through Partios

Are these genuine MONROE parts?

Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MONROE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.

Do you supply MONROE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MONROE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MONROE order?

It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MONROE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account