Partios Wholesale catalogue

Monroe Distributor | Suspension & Steering

Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)

12,624 current catalogue lines

About the MONROE range

Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,624 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MONROE Front track control arm silent block L15801

Front track control arm silent block in the back R (21,1x47x92 mm) fits: ALFA ROMEO 145, 146, 155, GTV, SPIDER FIAT BRAVA, BRAVO I, COUPE, MAREA, TEMPRA, TIPO LANCIA DEDRA 1.1-3.2 09.77-12.07

View part

MONROE Front track control arm silent block L15808

Front track control arm silent block in the front L/R (12,2x52,2 mm) fits: FIAT IDEA, PANDA, PUNTO LANCIA MUSA, YPSILON 1.1-1.9D 09.99-

View part

MONROE Front track control arm silent block L15809

Front track control arm silent block in the back L/R (12,5x60x65 mm) fits: FIAT BRAVO II, STILO LANCIA DELTA III 1.2-2.4 10.01-12.16

View part

MONROE Front track control arm silent block L15811

Front track control arm silent block in the back L/R (12x71x66 mm) fits: ABARTH GRANDE PUNTO, PUNTO, PUNTO EVO ALFA ROMEO MITO CITROEN NEMO FIAT FIORINO, GRANDE PUNTO, LINEA 0.9-Electric 06.05-

View part

MONROE Front track control arm silent block L15819

Front track control arm silent block in the back L/R fits: FIAT 500L, DOBLO, DOBLO CARGO MAZDA 3 PEUGEOT 206, BIPPER 0.9-2.0D 06.99-

View part

MONROE Front track control arm silent block L15822

Front track control arm silent block in the back/in the front L/R (14,4x60,7x52 mm) fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C FIAT 500, 500 C 0.9-Electric 07.07-

View part

MONROE Front track control arm silent block L15823

Front track control arm silent block in the front L/R (12,1x32,8x52 mm) fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C FIAT 500, 500 C, IDEA LANCIA YPSILON VOLVO FH II 0.9-Electric 10.03-

View part

MONROE Front track control arm silent block L15824

Front track control arm silent block in the back L/R (12,4x70,5x66 mm) fits: FIAT 500L, DOBLO, DOBLO CARGO MAZDA 3 OPEL COMBO, COMBO TOUR PEUGEOT BIPPER 0.9-2.0D 06.06-

View part

MONROE Front track control arm silent block L15825

Front track control arm silent block in the back L/R (14,4x60,6x51,6 mm) fits: LANCIA YPSILON 0.9-1.3D 05.11-

View part

MONROE Front track control arm silent block L15826

Front track control arm silent block in the front L/R (12,1x34x52,2 mm) fits: FIAT PANDA LANCIA YPSILON 0.9-1.3D 05.11-

View part

MONROE Front track control arm silent block L15827

Front track control arm silent block in the back L/R (14,5x60,8x52 mm) fits: FIAT PANDA 1.1-1.4CNG 09.03-

View part

MONROE Stabilizer bar bushing L15830

Stabilizer bar bushing front outer L/R (12mm) fits: FIAT DOBLO, DOBLO CARGO, PALIO, SIENA, STRADA 1.0-1.9D 04.96-

View part

MONROE Stabilizer bar bushing L15831

Stabilizer bar bushing front outer L/R fits: FIAT BARCHETTA, DOBLO, IDEA, PUNTO, STRADA LANCIA MUSA, Y, YPSILON 1.1-1.9D 09.93-

View part

MONROE Stabilizer bar bushing L15833

Stabilizer bar bushing front L/R (22,5mm) fits: FIAT SEDICI SUZUKI SX4 1.5-2.0D 06.06-

View part

MONROE Stabilizer bar bushing L15834

Stabilizer bar bushing front inner (20mm) fits: IVECO DAILY I, DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI 2.3D-Electric 01.85-

View part

MONROE Front track control arm silent block L15835

Front track control arm silent block front/rear fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V 01.96-02.14

View part

MONROE Front track control arm silent block L15839

Front track control arm silent block in the back L/R (14,3x60,6x51,5 mm) fits: FIAT PANDA 0.9-1.3D 02.12-

View part

MONROE Front track control arm silent block L15845

Front track control arm silent block in the front L/R (14,5x70x66 mm) fits: FIAT 500X JEEP COMPASS, RENEGADE 1.0-2.4 07.14-

View part

MONROE Front track control arm silent block L15846

Front track control arm silent block in the back L/R fits: FIAT 500X JEEP COMPASS, RENEGADE 1.0-2.4 07.14-

View part

MONROE Tie rod end L15G00

Tie rod end L/R fits: IVECO DAILY VI 2.3D-Electric 03.14-

View part

MONROE Tie rod end L15G01

Tie rod end L/R fits: IVECO DAILY VI 2.3D-Electric 03.14-

View part

MONROE Tie rod end L15G02

Tie rod end L/R fits: IVECO DAILY II, DAILY III 2.3D-3.0D 05.99-07.07

View part

MONROE Tie rod end L15G03

Tie rod end L/R fits: FIAT 124, 124 SPIDER, 126, 1500-2300 0.6-2.3 07.62-09.00

View part

MONROE Tie rod end L15G05

Tie rod end R fits: FIAT 500X JEEP COMPASS, RENEGADE 1.0-2.4 07.14-

View part

MONROE Tie rod end L15G06

Tie rod end L fits: FIAT 500X JEEP COMPASS, RENEGADE 1.0-2.4 07.14-

View part

MONROE Tie rod end L15G09

Tie rod end fits: IVECO DAILY VI 2.3D-Electric 03.14-

View part

MONROE Tie rod end L15G12

Tie rod end R fits: JEEP COMPASS, RENEGADE 1.0-2.4 07.14-

View part

MONROE Tie rod end L15G13

Tie rod end L fits: JEEP COMPASS, RENEGADE 1.0-2.4 07.14-

View part

MONROE Tie rod (with no end) L15H02

Tie rod (with no end) L/R (length: 253mm) fits: FIAT PANDA LANCIA YPSILON 0.9-1.3D 05.11-

View part

MONROE Tie rod (with no end) L15H03

Tie rod (with no end) L/R (length: 352mm) fits: IVECO DAILY VI 2.3D-Electric 03.14-

View part

MONROE Tie rod (with no end) L15H04

Tie rod (with end) L/R (length: 281mm) fits: FIAT PALIO, SIENA, STRADA 1.0-1.9D 04.96-

View part

MONROE Tie rod (with no end) L15H05

Tie rod (with no end) L/R (length: 317,3mm) fits: FIAT 500L, 500X JEEP RENEGADE 0.9-2.4 09.12-

View part

MONROE Front ball joint L15J01

Axle ball joint L/R (top front) (cone diameter 20mm) fits: IVECO DAILY VI 2.3D-Electric 03.14-

View part

MONROE Front ball joint L15J02

Axle ball joint L/R (bottom front) (cone diameter 23mm) fits: IVECO DAILY VI 2.3D-Electric 03.14-

View part

MONROE Wheel suspension track control arm, front L15J03

Front axle track control arm L front fits: FIAT BRAVO, BRAVO II, STILO LANCIA DELTA III 1.2-2.4 10.01-12.16

View part

MONROE Wheel suspension track control arm, front L15J04

Front axle track control arm R front fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C FIAT 500, 500 C 0.9-Electric 07.07-

View part

MONROE Wheel suspension track control arm, front L15J05

Front axle track control arm R bottom front fits: FIAT BRAVO, BRAVO II, STILO LANCIA DELTA III 1.2-2.4 10.01-12.16

View part

MONROE Wheel suspension track control arm, rear L15J06

Rear axle track control arm R (bottom, bottom, transverse) fits: ALFA ROMEO TONALE FIAT 500X JEEP COMPASS, RENEGADE 1.0-2.4 07.14-

View part

MONROE Wheel suspension track control arm, rear L15J07

Rear axle track control arm L (bottom, rear, transverse) fits: ALFA ROMEO TONALE FIAT 500X JEEP COMPASS, RENEGADE 1.0-2.4 07.14-

View part

MONROE Wheel suspension track control arm, front L15J08

Front axle track control arm L front fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C FIAT 500, 500 C 0.9-Electric 07.07-

View part

MONROE Wheel suspension track control arm, rear L15J09

Rear axle track control arm L/R (rear) fits: CHRYSLER SEBRING DODGE JOURNEY FIAT FREEMONT 2.0-3.6ALK 09.06-

View part

MONROE Wheel suspension track control arm, rear L15J10

Rear axle track control arm L/R (top, rear, transverse) fits: DODGE AVENGER, JOURNEY FIAT FREEMONT LANCIA FLAVIA 2.0-3.6ALK 06.07-

View part

MONROE Wheel suspension track control arm, rear L15J11

Rear axle track control arm R (longitudinal, longitudinal) fits: CHRYSLER 200, SEBRING DODGE AVENGER, JOURNEY FIAT FREEMONT LANCIA FLAVIA 2.0-3.6ALK 09.06-

View part

MONROE Wheel suspension track control arm, rear L15J12

Rear axle track control arm L (longitudinal) fits: CHRYSLER 200, SEBRING DODGE AVENGER, JOURNEY FIAT FREEMONT LANCIA FLAVIA 2.0-3.6ALK 09.06-

View part

MONROE Front ball joint L15J13

Axle ball joint L/R (bottom front) (cone diameter 18mm) fits: FIAT 500L, DOBLO, DOBLO CARGO OPEL COMBO, COMBO TOUR 0.9-2.0D 01.10-

View part

MONROE Front ball joint L15J14

Axle ball joint L/R (bottom front) (cone diameter 17mm) fits: LANCIA DELTA I 2.0 12.86-01.94

View part

MONROE Wheel suspension track control arm, front L15J15

Front axle track control arm L front fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C FIAT 500, 500 C 0.9-Electric 07.07-

View part

MONROE Wheel suspension track control arm, rear L15J18

Rear axle track control arm L/R fits: FIAT 500X JEEP RENEGADE 1.0-2.4 07.14-

View part

Buying with Partios

Buying MONROE parts through Partios

Are these genuine MONROE parts?

Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MONROE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.

Do you supply MONROE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MONROE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MONROE order?

It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MONROE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account