Partios Wholesale catalogue
Monroe Distributor | Suspension & Steering
Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)
12,624 current catalogue lines
About the MONROE range
Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,624 lines on the catalogue, most common applications in this area are covered without needing a second source.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MONROE Tie rod (with no end) L15212
Tie rod (with no end) L/R (length: 259mm) fits: LANCIA YPSILON 1.2-1.4LPG 10.03-12.11
View partMONROE Tie rod (with no end) L15214
Tie rod (with no end) L/R (length: 320mm) fits: FIAT COUPE, MAREA, MULTIPLA, SCUDO, ULYSSE 1.2-2.4D 11.93-06.10
View partMONROE Tie rod (with no end) L15215
Tie rod (with no end) L/R (length: 264mm) fits: FIAT IDEA LANCIA MUSA 1.2-1.9D 12.03-
View partMONROE Tie rod (with no end) L15217
Tie rod (with no end) L/R (length: 313mm) fits: DODGE JOURNEY FIAT FREEMONT LANCIA FLAVIA 2.0D-3.6ALK 06.08-
View partMONROE Tie rod (with no end) L15218
Tie rod (with no end) L/R length: 345mm fits: IVECO DAILY III, DAILY IV, DAILY V 8140.43B-F1CE3481L 05.99-02.14
View partMONROE Tie rod (with no end) L15219
Tie rod (with no end) L/R (length: 280mm) fits: FIAT 500L, 500X JEEP RENEGADE 0.9-2.0D 09.12-
View partMONROE Tie rod (with no end) L15220
Tie rod (with no end) L/R (length: 325mm) fits: FIAT TIPO 1.0-1.6D 10.15-
View partMONROE Tie rod end L1531
Tie rod end R fits: ALFA ROMEO 145, 146, 155, GTV, SPIDER FIAT BRAVA, BRAVO I, COUPE, TEMPRA, TIPO LANCIA DEDRA, DELTA II 1.1-3.2 07.87-10.05
View partMONROE Tie rod end L1532
Tie rod end L fits: ALFA ROMEO 145, 146, 155, GTV, SPIDER FIAT BRAVA, BRAVO I, COUPE, TEMPRA, TIPO LANCIA DEDRA, DELTA II 1.1-3.2 07.87-10.05
View partMONROE Wheel suspension track control arm, front L15503
Front axle track control arm L/R bottom front fits: FIAT DUNA, FIORINO INNOCENTI ELBA 1.1-1.7D 01.87-05.01
View partMONROE Front ball joint L15504
Axle ball joint L/R (top front) fits: FIAT PANDA, UNO LANCIA Y10 SEAT MARBELLA, TERRA 0.65-1.9D 10.80-
View partMONROE Wheel suspension track control arm, front L15505
Front axle track control arm R bottom front fits: FIAT CINQUECENTO, SEICENTO / 600 0.7-Electric 07.91-01.10
View partMONROE Wheel suspension track control arm, front L15506
Front axle track control arm L bottom front fits: FIAT CINQUECENTO, SEICENTO / 600 0.7-Electric 07.91-01.10
View partMONROE Wheel suspension track control arm, front L15507
Front axle track control arm R bottom front fits: FIAT PUNTO LANCIA Y 1.1-1.7D 09.93-09.03
View partMONROE Wheel suspension track control arm, front L15508
Front axle track control arm L bottom front fits: FIAT PUNTO LANCIA Y 1.1-1.7D 09.93-09.03
View partMONROE Wheel suspension track control arm, front L15509
Front axle track control arm R bottom front 17 mm fits: FIAT BRAVA, BRAVO I, TEMPRA, TIPO LANCIA DEDRA, DELTA II 1.1-2.0 07.87-12.02
View partMONROE Wheel suspension track control arm, front L15510
Front axle track control arm L bottom front fits: FIAT BRAVA, BRAVO I, TEMPRA, TIPO LANCIA DEDRA, DELTA II 1.1-2.0 07.87-12.02
View partMONROE Front ball joint L15512
Axle ball joint (front) (cone diameter 15,9mm) fits: FIAT TIPO 1.0-1.6D 10.15-
View partMONROE Front ball joint L15518
Axle ball joint (front) (cone diameter 15,9mm) fits: FIAT 500L, 500X, DOBLO, DOBLO CARGO JEEP COMPASS, RENEGADE 0.9-2.4 01.10-
View partMONROE Wheel suspension track control arm, front L15523
Front axle track control arm R bottom front fits: FIAT MULTIPLA LANCIA LYBRA 1.6-2.4D 04.99-06.10
View partMONROE Wheel suspension track control arm, front L15524
Front axle track control arm L bottom front fits: FIAT MULTIPLA LANCIA LYBRA 1.6-2.4D 04.99-06.10
View partMONROE Front ball joint L15525
Axle ball joint L/R (bottom front) (cone diameter 13,7mm) fits: FIAT DOBLO, PALIO, SIENA, STRADA 1.0-1.9D 04.96-
View partMONROE Wheel suspension track control arm, front L15527
Front axle track control arm R bottom front 19 mm fits: FIAT TIPO 1.0-1.6D 10.15-
View partMONROE Wheel suspension track control arm, front L15528
Front axle track control arm L bottom front 19 mm fits: FIAT TIPO 1.0-1.6D 10.15-
View partMONROE Wheel suspension track control arm, front L15529
Front axle track control arm R bottom front fits: FIAT GRANDE PUNTO, PUNTO 1.2-1.9D 09.99-
View partMONROE Wheel suspension track control arm, front L15530
Front axle track control arm L bottom front fits: FIAT GRANDE PUNTO, PUNTO 1.2-1.9D 09.99-
View partMONROE Wheel suspension track control arm, front L15531
Front axle track control arm R bottom front fits: FIAT STILO 1.2-2.4 10.01-08.08
View partMONROE Wheel suspension track control arm, front L15532
Front axle track control arm L bottom front fits: FIAT STILO 1.2-2.4 10.01-08.08
View partMONROE Wheel suspension track control arm, front L15533
Front axle track control arm R bottom/transverse front 15 mm (with a joint (knuckle) with rubber pad) fits: FIAT PANDA 1.1-1.4CNG 09.03-
View partMONROE Wheel suspension track control arm, front L15534
Front axle track control arm L bottom/transverse front 15 mm (with a joint (knuckle) with rubber pad) fits: FIAT PANDA 1.1-1.4CNG 09.03-
View partMONROE Wheel suspension track control arm, front L15537
Front axle track control arm R bottom front fits: FIAT 500X JEEP RENEGADE 1.3-2.4 07.14-
View partMONROE Wheel suspension track control arm, front L15538
Front axle track control arm L bottom front fits: FIAT 500X JEEP RENEGADE 1.3-2.4 07.14-
View partMONROE Front ball joint L15549
Axle ball joint (front) (cone diameter 13,7mm) fits: FIAT DOBLO, PALIO, SIENA 1.0-1.9D 04.96-
View partMONROE Wheel suspension track control arm, front L15551
Front axle track control arm R bottom front fits: FIAT DOBLO, PALIO, SIENA, STRADA 1.0-1.9D 04.96-
View partMONROE Wheel suspension track control arm, front L15552
Front axle track control arm L bottom front fits: FIAT DOBLO, PALIO, SIENA, STRADA 1.0-1.9D 04.96-
View partMONROE Wheel suspension track control arm, front L15553
Front axle track control arm R bottom/transverse front (with a joint (knuckle) with rubber pad) fits: FIAT DOBLO 1.2-1.9D 03.01-
View partMONROE Front ball joint L15555
Axle ball joint L/R (top front) (cone diameter 18 21mm) fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI 2.3D-Electric 05.99-
View partMONROE Front ball joint L15556
Axle ball joint L/R (bottom front) (cone diameter 21mm) fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V 2.3D-Electric 05.99-02.14
View partMONROE Wheel suspension track control arm, front L15557
Front axle track control arm R bottom front fits: ABARTH GRANDE PUNTO, PUNTO, PUNTO EVO ALFA ROMEO MITO CITROEN NEMO FIAT FIORINO, GRANDE PUNTO, LINEA, PUNTO, PUNTO EVO 0.9-Electric 06.05-
View partMONROE Wheel suspension track control arm, front L15558
Front axle track control arm L bottom front 16 mm fits: ABARTH GRANDE PUNTO, PUNTO, PUNTO EVO ALFA ROMEO MITO CITROEN NEMO FIAT FIORINO, GRANDE PUNTO, LINEA, PUNTO, PUNTO EVO 0.9-Electric 06.05-
View partMONROE Wheel suspension track control arm, front L15559
Front axle track control arm L/R top front fits: FIAT PANDA LANCIA Y10 SEAT MARBELLA, TERRA 0.65-1.4D 10.80-07.04
View partMONROE Wheel suspension track control arm, front L15560
Front axle track control arm L/R top front fits: FIAT PANDA 0.9/1.0/1.1 10.80-07.04
View partMONROE Wheel suspension track control arm, front L15561
Front axle track control arm R bottom front fits: FIAT GRANDE PUNTO, IDEA LANCIA MUSA, YPSILON 1.2-1.9D 10.03-
View partMONROE Wheel suspension track control arm, front L15562
Front axle track control arm L bottom front fits: FIAT GRANDE PUNTO, IDEA LANCIA MUSA, YPSILON 1.2-1.9D 10.03-
View partMONROE Wheel suspension track control arm, front L15563
Front axle track control arm R bottom front fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C FIAT 500, 500 C 0.9-Electric 07.07-
View partMONROE Wheel suspension track control arm, front L15564
Front axle track control arm L bottom front 17 mm fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C FIAT 500, 500 C 0.9-Electric 07.07-
View partMONROE Wheel suspension track control arm, front L15565
Front axle track control arm R bottom/transverse front 17 mm (with a joint (knuckle) with rubber pad) fits: FIAT STILO 1.2-2.4 10.01-08.08
View partMONROE Wheel suspension track control arm, front L15566
Front axle track control arm L bottom front fits: FIAT STILO 1.2-2.4 10.01-08.08
View partBuying with Partios
Buying MONROE parts through Partios
Are these genuine MONROE parts?
- Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MONROE parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.
Do you supply MONROE parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MONROE parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MONROE order?
- It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MONROE parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account