Partios Wholesale catalogue

Megadyne Supplier | Engine Components

Drive belt (110) · Pulley (29)

142 current catalogue lines

About the MEGADYNE range

Megadyne’s range at Partios is engine components, and it is concentrated: 110 of the 142 lines carried sit under one part type, drive belt. Behind it the largest groups are pulley (29). That is the complete range. Two part types in total. Buyers are typically workshops, motor factors and exporters; these are mostly scheduled-replacement or failure-driven items, where correct application matching is what decides the order. 142 lines makes this a specific range rather than a broad programme. Approved trade accounts see wholesale pricing across the whole Megadyne range. Anything not in stock can be requested as a manufacturer order.

Catalogue products

MEGADYNE Pulley KOLO 3SPB 148 TB1610/42

Pulley SPB number of tracks/teeth: 3x148

View part

MEGADYNE Pulley KOLO 40 5M 25F

Pulley 5M number of tracks/teeth: 40

View part

MEGADYNE Pulley KOLO 40 8M 30F

Pulley 8M number of tracks/teeth: 40x30

View part

MEGADYNE Pulley KOLO 40 T10 20F

Pulley T10 number of tracks/teeth: 20x25

View part

MEGADYNE Pulley KOLO 40 T10 24F

Pulley T10 number of tracks/teeth: 24x25

View part

MEGADYNE Pulley KOLO 40 T10 27-2

Pulley T10 number of tracks/teeth: 27x25

View part

MEGADYNE Pulley KOLO 40 T10 30F

Pulley T10 number of tracks/teeth: 30x25

View part

MEGADYNE Pulley KOLO 40 T10 36F

Pulley T10 number of tracks/teeth: 36x25

View part

MEGADYNE Pulley KOLO 40 T10 40F

Pulley T10 number of tracks/teeth: 40x25

View part

MEGADYNE Pulley KOLO 47 AT10 22F

Pulley T10 number of tracks/teeth: 22x32

View part

MEGADYNE Pulley KOLO 47 T10 27F

Pulley T10 number of tracks/teeth: 27x32

View part

MEGADYNE Pulley KOLO 48 5M 9F

Pulley 5M number of tracks/teeth: 48x9

View part

MEGADYNE Pulley KOLO 56 8M 30-2

Pulley 8M number of tracks/teeth: 56x30

View part

MEGADYNE Pulley KOLO 67 14M 68 SPCL

Belt pulley bushing 14M number of tracks/teeth: 67 (special production according to drawing Taper Bush)

View part

MEGADYNE Pulley KOLO 68 14M 68 SPCL

Belt pulley bushing 14M number of tracks/teeth: 68 (special production according to drawing Taper Bush)

View part

MEGADYNE Pulley KOLO 72 14M 68 SPCL

Belt pulley bushing 14M number of tracks/teeth: 72 (special production according to drawing Taper Bush)

View part

MEGADYNE Pulley KOLO 74 14M 68 SPCL

Belt pulley bushing 14M number of tracks/teeth: 74 (special production according to drawing Taper Bush)

View part

MEGADYNE Pulley KOLO 78 14M 68 SPCL

Belt pulley bushing 14M number of tracks/teeth: 78 (special production according to drawing Taper Bush)

View part

MEGADYNE Pulley KOLO HTD 28 M8 30

View part

MEGADYNE Pulley KOLO HTD 36 M5 25

View part

MEGADYNE Drive belt MEGAFLEX 20 T10 DD 1250

timing belt on both sides

View part

MEGADYNE Drive belt MEGAFLEX 25 T10 DD 1520

timing belt on both sides - Megaflex

View part

MEGADYNE Drive belt MEGAFLEX 25 T10 DD 2000

Pas obustronnie zębaty

View part

MEGADYNE Drive belt megaflex 25T10DD2620 KEVLAR

V-belt, polyurethane number of teeth: 262, wedge width: 25mm, standard length: 2620mm, belt profile T10, metric scale: 10mm (kevlar cord)

View part

MEGADYNE Drive belt MEGAFLEX 32/T10 2190

Timing toothed belt (red steel cord)

View part

MEGADYNE Drive belt MEGALINEAR 25/T10 5410 SG

Timing toothed belt (green colour steel cord)

View part

MEGADYNE Drive belt MEGALINEAR 50/T10 3500

V-belt, open wedge width: 50mm, standard length: 3500mm

View part

MEGADYNE Drive belt MEGALINEAR RPP14M/6890/55

V-belt, open wedge width: 55mm, standard length: 6890mm, belt profile 14M

View part

MEGADYNE Drive belt MEGAPOWER 10/T2.5 480

Pas zębaty MEGAPOWER 10/T2.5 480 kord kewlarowy

View part

MEGADYNE Drive belt MEGAPOWER 10/T5 220

Timing toothed belt number of teeth: 44, standard length: 220mm, belt profile T5

View part

MEGADYNE Drive belt MEGAPOWER 10/T5 900

Timing toothed belt number of teeth: 180, wedge width: 10mm, standard length: 900mm, belt profile T5

View part

MEGADYNE Drive belt MEGAPOWER 25/AT10 560 ST

Pas zębaty MEGAPOWER 25/AT10 560 kord stalowy

View part

MEGADYNE Drive belt MEGAPOWER 25/AT10 840 ST

Pas zębaty MEGAPOWER 25/AT10 840 kord stalowy

View part

MEGADYNE Drive belt MEGAPOWER 25/T10 1300

V-belt, endless, polyurethane number of teeth: 130, wedge width: 25mm, standard length: 1300mm, belt profile T10

View part

MEGADYNE Drive belt MEGAPOWER 25/T10 410

Timing toothed belt wedge width: 25mm, standard length: 410mm

View part

MEGADYNE Drive belt MEGAPOWER 25/T10 440

Timing toothed belt wedge width: 25mm, standard length: 440mm

View part

MEGADYNE Drive belt MEGAPOWER 25 T10 DD 980

timing belt on both sides - with cord kevlarowym MegaPower

View part

MEGADYNE Drive belt MEGAPOWER 25/T5 560

Pas zębaty MEGAPOWER 25/T10 560, kord stalowy

View part

MEGADYNE Drive belt MEGAPOWER 32/T10 370FDA

Pas zębaty MEGAPOWER 32/T10 370 guma FDA (biały) 70SHA 1,5 mm

View part

MEGADYNE Drive belt MEGAPOWER 32/T10 500FDA

Pas zębaty MEGAPOWER 32/T10 500 guma FDA (biały) 70SHA 2 mm

View part

MEGADYNE Drive belt MEGAPOWER 32/T5 510FDA

Pas zębaty MEGAPOWER 32/T5 510 guma FDA (biały) 70SHA 1,5mm, nakładka klejona

View part

MEGADYNE Drive belt MEGAPOWER 32/T5 840FDA

Pas zębaty MEGAPOWER 32/T5 840 guma FDA (biały) 70SHA 1,5mm, nakładka klejona

View part

MEGADYNE Drive belt MEGAWELD D=10MM L=900MM

Round belt, standard length: 900mm (green colour no terminal end rough)

View part

MEGADYNE Drive belt MEGAWELD D=10MM L=915MM

Round belt (green colour no terminal end rough)

View part

MEGADYNE Drive belt MEGAWELD D=8MM L=500MM

Round belt, standard length: 5000mm (green colour open belt rough)

View part

MEGADYNE Drive belt MEGAWELD PR85 NL FI10mm

Round belt, standard length: 750mm (green colour no terminal end rough)

View part

MEGADYNE Drive belt PJ7 406

Pas Poly

View part

MEGADYNE Drive belt RPP 525X25

Timing toothed belt wedge width: 25mm, standard length: 525mm

View part

Buying with Partios

Buying MEGADYNE parts through Partios

Are these genuine MEGADYNE parts?

Yes. Every MEGADYNE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MEGADYNE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MEGADYNE lines that aren't currently available.

Do you supply MEGADYNE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MEGADYNE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MEGADYNE order?

It depends on the line. Stocked MEGADYNE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MEGADYNE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MEGADYNE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account